MICROCIRCUIT DATA SHEET Original Creation Date: 10/09/97 Last Update Date: 07/30/99 Last Major Revision Date: 10/09/97 MV54ACT157-X REV 0A0 Quad 2-Input Multiplexer General Description The ACT157 is a high-speed quad 2-input multiplexer. Four bits of data from two sources can be selected using the common Select and Enable inputs. The four outputs present the selected data in the true (noninverted) form. The ACT157 can also be used as a function generator. Industry Part Number NS Part Numbers 54ACT157 54ACT157E-QMLV* 54ACT157ERQMLV* 54ACT157J-QMLV** 54ACT157JRQMLV** 54ACT157W-QMLV*** 54ACT157WRQMLV*** Prime Die J157 Controlling Document 5962-89688 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MV54ACT157-X REV 0A0 Features - Outputs source/sink 24 mA ACT157 has TTL-compatible inputs Standard Military Drawing (SMD) - ACT157: 5962-8968801V2A*, VEA**, VFA*** - ACT157: 5962R8968801V2A*, VEA**, VFA*** 2 MICROCIRCUIT DATA SHEET MV54ACT157-X REV 0A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Vi = Vi = DC Input Diode Current (Iik) -0.5V Vcc +0.5V Voltage (Vi) -20 mA +20 mA -0.5V to Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC output Source or Sink Current (Io) -20 mA +20 mA +50 mA DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA Storage Temperature (Tstg) -65 C to +150 C Junction Temperature (Tj) CDIP Thermal Resistance, junction-to-case (jc) 175 C See MIL-STD-1835 Maximum Power Dissipation, (pd) 500 mW Lead Temperature (soldering, 10 seconds) +300 C Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature (Ta) -55 C to +125 C Minimum ACT Vin Vcc Input Edge Rate (Delta V/Delta t) Devices from 0.8V to 2.0V @ 4.5V, 5.5V 125 mV/ns 3 MICROCIRCUIT DATA SHEET MV54ACT157-X REV 0A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL IIH IIL VOL PARAMETER High level input Current Low level input Current Low level output Voltage CONDITIONS NOTES VCC=5.5V, VM=5.5V, VINL=0.0V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 VCC=4.5V, VINH=4.5V, VIH=2.0V, VIL=0.8V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, VINH=5.5V, VIH=2.0V, VIL=0.8V, IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2, 3 VCC=4.5V, VINH=4.5V, VIH=2.0V, VIL=0.8V, IOL=24.0mA 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VM=0.0V, VINH=5.5V, VINL=0.0V VCC=5.5V, VINH=5.5V, VIH=2.0V, VIL=0.8V, IOL=24.0mA VIOL Dynamic output current LOW VCC=5.5V, VIL=0.8V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIH=2.0V, VIL=0.8V, IOH=-50.0uA 1, 2 OUTPUT 4.40 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOH=-50.0uA 1, 2 OUTPUT 5.40 V 1, 2, 3 VCC=4.5V, VIH=2.0V, VIL=0.8V, IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.70 V 2, 3 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.70 V 2, 3 3.85 V 1, 2, 3 VCC=5.5V, VIH=2.0V, VIL=0.8V, IOH=-24.0mA VIOH Dynamic output current HIGH VCC=5.5V, VIH=2.0V, VIL=0.8V, IOH=-50.0mA 1, OUTPUT 2, 5 ICCH Supply Current Outputs HIGH VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 2 VCC 100 nA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 100 nA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 100 nA 1 1, 2 VCC 80 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 1.50 V 1 ICCL ICCF ICCT VIC+ Supply Current Outputs LOW Supply Current Functional Supply Current per Input Positive Input Clamp Voltage VCC=5.5V, VINL=0.0V VCC=5.5V, VINL=0.0V VCC=5.5V, VIHT=VCC-2.1 VCC=0.0V, IM=1.0 mA 7, 8 INPUT 4 0.40 MICROCIRCUIT DATA SHEET MV54ACT157-X REV 0A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. SYMBOL VIC- PARAMETER Negative Input Clamp Voltage CONDITIONS NOTES VCC=Open, IM=-1.0 mA PINNAME 7, 8 INPUT MIN -0.40 MAX -1.5 UNIT SUBGROUPS V 1 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. tpLH(1) tpHL(1) tpLH(2) tpHL(2) tpLH(3) tpHL(3) Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Propagation Delay Note 1: Note 2: Note 3: Note 4: Note Note Note Note 5: 6: 7: 8: Vcc=4.5V Vcc=4.5V Vcc=4.5V Vcc=4.5V Vcc=4.5V Vcc=4.5V 3, S to Zn 1.5 4, 6 9.0 ns 9 3, S to Zn 1.5 4, 6 11.5 ns 10, 11 3, S to Zn 1.5 4, 6 9.5 ns 9 3, S to Zn 1.5 4, 6 11.5 ns 10, 11 3, En to 4, 6 Zn 1.5 10.0 ns 9 3, En to 4, 6 Zn 1.5 12.0 ns 10, 11 3, En to 4, 6 Zn 1.5 8.5 ns 9 3, En to 4, 6 Zn 1.5 10.0 ns 10, 11 3, In to 4, 6 Zn 1.5 7.0 ns 9 3, In to 4, 6 Zn 1.5 8.5 ns 10, 11 3, In to 4, 6 Zn 1.5 7.5 ns 9 3, In to 4, 6 Zn 1.5 9.0 ns 10, 11 SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C & -55C TEMPERATURE, SUBGROUPS A1, 2, 3, 7 & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C, +125C & -55C TEMPERATURE, SUBGROUPS A9, 10 & 11. TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX. MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A1. SAMPLE TESTED (METHOD 5005, TABLE 1) AT +25C TEMPERATURE ONLY, SUBGROUP A1. 5 MICROCIRCUIT DATA SHEET MV54ACT157-X REV 0A0 Revision History Rev ECN # 0A0 M0003355 07/30/99 Rel Date Originator Changes Linda Collins Initial MDS Release 6