Switches and Indicators 61 61 Switches and Indicators Index Series 61 Description Page 109 Product Assembly Page 110 Product Range - pushbuttons for standard mounting - pushbuttons for flush mounting - asseccories / spare parts 108 01.2000 Page 111 Page 117 Page 123 Technical Data Page 137 Technical Drawing / Dimension / Layouts Page 140 Circuit Drawing Page 150 Typical Applications Page 151 Marking Page 153 61 Description General Notes Keylock switch The indicators, illuminated pushbuttons, selector switches, keylock switches and emergency stop switches with spray-water protection at the front (IP 65) are modular and consist of an actuator and switching element. In addition to the standard switching elements (gold-plated silver contact with universal soldering or plug-in terminals), forcedopening, slow-make switching elements with gold or silver contacts and soldering or plug-in terminals are available. They can be supplied with screw terminals and silver contacts too. The front dimensions of the units in this series are 24 x 24 mm, 24 mm dia., 18 x 24 mm, 18 x 18 mm or 18 mm dia. For flush mounting the dimensions 25 mm dia., 24 x 30 mm and 24 x 24 mm can be supplied. Standard lock (index D) 1 standard number 311. If the lock number is not specified, we will supply no. 311. An additional 134 special locks (index X) are available on request. Master keys for locks no. 311 - 445 may be ordered by quoting no. 31-989.300. Two keys are supplied with each keylock switch. Spare keys for DOM standard locks may be ordered by quoting no. 31-989 (please state the lock number). Mounting All switch actuators are mounted from the front by pushing them through the mounting hole in the front panel. They are then fixed from the back with a fixing nut and the mounting tool typ no. 01-907. Max. tightening torque 50 Ncm. For mounting dimensions and grid size see as of page 145. The preassembled switching element with the connecting wires in a single plane can be clipped on afterwards. For block or series mounting aids are available. For switching elements with 2.8 mm plug-in terminals, we offer plugin bases, which when soldered to a PCB enable a plug-in connection to the button. All actuators are provided with an anti-rotation device. Emergency stop switch foolproof with key to unlock Kaba safety lock. Standard lock number is 1001. Locks with other numbers are available on request. Spare keys for KABA locks may be ordered under no. 14-987 (please state the lock number). Specimen order Indicator complete - indicator complete, soldering terminal, 18 x 24 mm Recommended accessories: - lens plastic, 18 x 24 mm, clear - LED, 6 chips, 6 VDC, yellow 61-0030.02 61-9331.7 10-5306.3254 Lenses The flat or concave lenses are available in various colours and a transparent or translucent version. The lens surface is non-reflecting (matt). Lenses 19.7 mm dia. can be supplied also in aluminium. Marking For engraving, hot stamping and film inserts, see page 153 under “Marking”. Illumination The midget-grooved T 1 3/4 incandescent lamp (6-60 V, 1.2 W) ensures perfect illumination of the lenses, which are supplied in various colours. Midget-grooved T 1 3/4 Multi-LED (6, 12, 24, 48 V) are also available in white, red, yellow and green. For supply voltages above 60 V, it is necessary to use a voltage reduction element (external series resistor, capacitor or transformer). Do not solder the terminals directly, bacause of the high surface temperature. Position indication When the switch with maintained action is actuated, the lens snaps into place mechanically. The position of contacts can always be determined by the position of the lens. 109 01.2000 61 61 Product Assembly illuminated-/pushbutton 1 2 3 4 lens actuator case fixing nut switching element 1 2 3 4 5 6 7 8 lens acutator housing front bezel sealing front panel fixing bow fixing nut switching element illuminated-/pushbutton for flush mounting 110 01.2000 61 Pushbuttons for Standard Mounting indicator complete recommended accessories: 18 x 18 mm part no. 61-0020.02 24 mm dia. part no. 61-0040.02 mounting dimension 18 mm dia. part no. 61-0010.02 e 1 1 1 0,005 mounting dimension 24 x 24 mm part no. 61-0050.02 technical drawing 18 x 24 mm part no. 61-0030.02 b technical drawing ST/PT b circuit drawing indicator complete a circuit drawing connection method d lens plastic → 123 d front ring → 126 d incandescent lamp → 132; LED → 133 e 1 2 1 0,005 61 connection method: ST/PT = soldering-/plug-in terminal Accessorie front ring only requested for Ø 24 mm. marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 indicator-/flasher-actuator recommended accessories: d lens plastic → 123 d front ring → 126 d incandescent lamp → 132; LED → 133 d lamp element → 128; diode element → 128; flasher element → 131 indicator-/flasher-actuator a b 18 x 24 mm part no. 61-0039.0 24 x 24 mm part no. 61-0059.0 b 18 mm dia. part no. 61-0019.0 18 x 18 mm part no. 61-0029.0 24 mm dia. part no. 61-0049.0 Accessorie front ring only requested for Ø 24 mm. marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 111 01.2000 61 Pushbuttons for Standard Mounting illuminated-/pushbutton actuator recommended accessories: 24 mm dia. part no. 61-1240.0 61-1140.0 mounting dimension 18 x 18 mm part no. 61-1220.0 61-1120.0 61-1320.0 e 2 3 3 3 3 3 1 1 1 0,005 0,005 0,005 mounting dimension b 18 mm dia. part no. 61-1210.0 61-1110.0 61-1310.0 technical drawing 24 x 24 mm part no. 61-1250.0 61-1150.0 61-1350.0 technical drawing main mom mom/main b 18 x 24 mm part no. 61-1230.0 61-1130.0 61-1330.0 circuit drawing illuminated-/pushbutton actuator a circuit drawing switching action d lens plastic → 123; lens metal with window → 124; lens metal → 124 d front ring → 126 d incandescent lamp → 132; LED → 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 e 4 4 4 4 4 4 2 2 2 0,003 0,003 0,038 switching action: main = maintained action, mom = momentary action, mom/main = momentary-/maintained action Accessorie front ring only requested for Ø 24 mm. marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 emergency stop switch actuator foolproof according to EN 418 recommended accessories: switching action d label for emergency stop switch → 134 d switching element for emergency stop switch → 130 d protective shroud for emergency stop switch → 134 emergency stop switch actuator foolproof main unlocking twist to release without label standard lock1001, other lock numbers on request main key to release marking of mushroom-head cap arrows stop stop switching action: main = maintained action description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 112 01.2000 27 mm dia. part no. 61-3440.4/1 61-3440.4/2 61-5441.4/K 61 Pushbuttons for Standard Mounting pushbutton actuator with mushroom-head cap recommended accessories: mounting dimension main mom technical drawing pushbutton actuator with mushroom-head cap 32 mm dia. part no. 61-1240.0 61-1140.0 circuit drawing switching action d mushroom-head cap → 124 d front ring → 126 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 e 2 3 5 5 2 2 0,006 0,006 61 switching action: main = maintained action, mom = momentary action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 keylock switch actuator 2 positions if installed with anti-twist device, the lug is on the left. recommended accessories: A keylock switch actuator 2 positions pos. A: basic position pos. C: maintained action standard lock 311, other lock numbers on request pos. A: basic position pos. C: momentary action standard lock 311, other lock numbers on request main mom key removable in A C C+A part no. 61-2201.0/D 61-2203.0/D 61-2205.0/D A 61-2101.0/D mounting dimension C A technical drawing C circuit drawing mom. 42˚ maint. 90˚ switching action d keylock front bezel → 124 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 d anti-twisting ring → 135 e 6 6 6 6 6 6 1 1 1 0,003 0,003 0,003 5 6 1 0,003 switching action: main = maintained action, mom = momentary action description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 113 01.2000 61 Pushbuttons for Standard Mounting keylock switch actuator 3 positions if installed with anti-twist device, the lug is on the left. recommended accessories: C A B A key removable in A A+B B C C+A C+A+B C+B A C C+A part no. 61-2601.0/D 61-2604.0/D 61-2602.0/D 61-2603.0/D 61-2605.0/D 61-2607.0/D 61-2606.0/D 61-2701.0/D 61-2703.0/D 61-2705.0/D mounting dimension B technical drawing C e 11 11 11 11 11 11 11 10 10 10 6 6 6 6 6 6 6 6 6 6 1 1 1 1 1 1 1 1 1 1 0,003 0,003 0,003 0,003 0,003 0,003 0,003 0,003 0,003 0,003 mom-0-main A A+B B 61-2801.0/D 61-2804.0/D 61-2802.0/D 9 9 7 6 6 6 1 1 1 0,003 0,003 0,003 mom-0-mom A 61-2501.0/D 8 6 1 0,003 switching action mom. 42˚ maint. 90˚ circuit drawing d keylock front bezel → 124 d switching element for keylock-/selector switch 3 positions → 130 d anti-twisting ring → 135 keylock switch actuator 3 positions pos. C: maintained action pos. A: basic position pos. B: maintained action standard lock 311 other lock numbers on request main-0-main pos. C: maintained action pos. A: basic position pos. B: momentary action standard lock 311 other lock numbers on request pos. C: momentary action pos. A: basic position pos. B: maintained action standard lock 311 pos. C: momentary action pos. A: basic position pos. B: momentary action standard lock 311 main-0-mom switching action: mom = momentary action, main = maintained action, 0 = basic position description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 114 01.2000 61 Pushbuttons for Standard Mounting selector switch actuator 2 positions if installed with anti-twist device, the lug is on the left. recommended accessories: d lever → 125 d incandescent lamp → 132; LED → 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 d anti-twisting ring → 135 circuit drawing technical drawing mounting dimension 13 7 1 0,006 mom 61-4110.0 12 7 1 0,006 switching action e main 18 mm dia. part no. 61-4210.0 mom. 42˚ maint. 90˚ C C A A selector switch actuator 2 positions pos. C: maintained action pos. A: basic position pos. C: momentary action pos. A: basic position 61 switching action: main = maintained action, mom = momentary action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 115 01.2000 61 Pushbuttons for Standard Mounting selector switch actuator 3 positions if installed with anti-twist device, the lug is on the left. recommended accessories: C A B A selector switch actuator 3 positions pos. C: maintained action pos. A: basic position pos. B: maintained action pos. C: maintained action pos. A: basic position pos. B: momentary action pos. C: momentary action pos. A: basic position pos. B: maintained action pos. C: momentary action pos. A: basic position pos. B: momentary action e main-0-main 18 mm dia. part no. 61-4610.0 mounting dimension B technical drawing C 17 7 1 0,006 main-0-mom 61-4710.0 16 7 1 0,006 mom-0-main 61-4810.0 15 7 1 0,006 mom-0-mom 61-4510.0 14 7 1 0,006 switching action mom. 42˚ maint. 90˚ circuit drawing d lever → 125 d incandescent lamp → 132; LED → 133 d switching element for keylock-/selector switch 3 positions → 130 d anti-twisting ring → 135 switching action: mom = momentary, main = maintaining, 0 = basic position technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 116 01.2000 61 Pushbuttons for Flush Mounting indicator complete for flush mounting recommended accessories: technical drawing mounting dimension e 1 8 3 0,006 mounting dimension part no. 61-0000.02 technical drawing ST/PT circuit drawing indicator complete for flush mounting circuit drawing connection method d lens plastic for flush mounting → 124 d front bezel-set for flush mounting → 126 d incandescent lamp → 132; LED → 133 e 1 9 3 0,005 61 connection method: ST/PT = soldering-/plug-in terminal marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 indicator-/flasher-actuator for flush mounting recommended accessories: d lens plastic for flush mounting → 124 d front bezel-set for flush mounting → 126 d incandescent lamp → 132; LED → 133 d lamp element → 128; diode element → 128; flasher element → 131 indicator-/flasher-actuator for flush mounting part no. 61-0009.0 marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 117 01.2000 61 Pushbuttons for Flush Mounting illuminated-/pushbutton actuator for flush mounting recommended accessories: technical drawing mounting dimension e 19 19 18 10 10 10 3 3 3 0,005 0,005 0,005 mounting dimension part no. 61-1300.0 61-1100.0 61-1200.0 technical drawing mom/main mom main circuit drawing illuminated-/pushbutton actuator for flush mounting circuit drawing switching action d lens plastic for flush mounting → 124; lens metal with window → 124; lens metal → 124 d front bezel-set for flush mounting → 126 d incandescent lamp → 132; LED → 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 e 3 3 2 11 11 11 2 2 2 0,006 0,006 0,006 switching action: main = maintained action, mom = momentary action, mom/main = momentary-/maintained action marking see page 153 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 mushroom pushbutton actuator for flush mounting , recommended accessories: switching action d mushroom-head cap → 124 d front bezel-set round for flush mounting → 126 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 mushroom pushbutton actuator for flush mounting mom/main mom main part no. 61-1300.0 61-1100.0 61-1200.0 switching action: main = maintained action, mom = momentary action, mom/main = momentary-/maintained action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 118 01.2000 61 Pushbuttons for Flush Mounting keylock switch actuator with 2 positions for flush mounting recommended accessories: A keylock switch actuator with 2 positions for flush mounting pos. A: basic position pos. C: maintained action standard lock 311, other lock numbers on request pos. A: basic position pos. C: momentary action standard lock 311, other lock numbers on request main mom key removable in A C C+A part no. 61-2201.0/D 61-2203.0/D 61-2205.0/D A 61-2101.0/D mounting dimension C A technical drawing C circuit drawing mom. 42˚ maint. 90˚ switching action d keylock front bezel → 124 d front bezel-set for flush mounting → 126 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 e 6 6 6 12 12 12 3 3 3 0,003 0,003 0,003 5 12 3 0,003 switching action: main = maintained action, mom = momentary action description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 119 01.2000 61 61 Pushbuttons for Flush Mounting keylock switch actuator 3 positions for flush mounting recommended accessories: C A B A keylock switch actuator 3 positions for flush mounting pos. C: maintained action pos. A: basic position Pos. B: momentary action standard lock 311, other lock numbers on request pos. C: maintained action pos. A: basic position pos. B: maintained action standard lock 311, other lock numbers on request main-0-mom pos. C: momentary action pos. A: basic position pos. B: maintained action standard lock 311, other lock numbers on request pos. C: momentary action pos. A: basic position pos. B: momentary action standard lock 311, other lock numbers on request mom-0-main main-0-main mom-0-mom key removable in A C C+A part no. 61-2701.0/D 61-2703.0/D 61-2705.0/D mounting dimension B technical drawing C circuit drawing mom. 42˚ maint. 90˚ switching action d keylock front bezel → 124 d front bezel-set for flush mounting → 126 d switching element for keylock-/selector switch 3 positions → 130 e 10 5 10 12 12 12 3 3 3 0,003 0,003 0,003 A A+B B C C+A C+A+B C+B A A+B B 61-2601.0/D 61-2604.0/D 61-2602.0/D 61-2603.0/D 61-2605.0/D 61-2607.0/D 61-2606.0/D 61-2801.0/D 61-2804.0/D 62-2802.0/D 11 11 11 11 11 11 11 9 9 9 12 12 12 12 12 12 12 12 12 12 3 3 3 3 3 3 3 3 3 3 0,003 0,003 0,003 0,003 0,003 0,003 0,003 0,003 0,003 0,003 A 61-2501.0/D 8 12 3 0,003 switching action: mom = momentary action, main = maintained action, 0 = basic position description see page 109 technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 120 01.2000 61 Pushbuttons for Flush Mounting selector switch actuator 2 positions for flush mounting recommended accessories: technical drawing mounting dimension 13 13 3 0,006 mom 61-4110.0 12 13 3 0,006 switching action e main part no. 61-4210.0 circuit drawing d lever for flush mounting → 125 d front bezel-set for flush mounting → 126 d incandescent lamp → 132; LED → 133 d switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions → 129 mom. 42˚ maint. 90˚ C C A A selector switch actuator 2 positions for flush mounting pos. C: maintained action pos. A: basic position pos. C: momentary action pos. A: basic position switching action: main = maintained action, mom = momentary action technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 121 01.2000 61 61 Pushbuttons for Flush Mounting selector switch actuator 3 positions for flush mounting recommended accessories: C A B A selector switch actuator 3 positions for flush mounting pos. C: maintained action pos. A: basic position pos. B: maintained action pos. C: maintained action pos. A: basic position pos. B: momentary action pos. C: momentary action pos. A: basic position pos. B: maintained action pos. C: momentary action pos. A: basic position pos. B: momentary action e main-0-main part no. 61-4610.0 mounting dimension B technical drawing C 17 13 3 0,006 main-0-mom 61-4710.0 16 13 3 0,006 mom-0-main 61-4810.0 15 13 3 0,006 mom-0-mom 61-4510.0 14 13 3 0,006 switching action mom. 42˚ maint. 90˚ circuit drawing d lever for flush mounting → 125 d front bezel-set for flush mounting → 126 d incandescent lamp → 132; LED → 133 d switching element for keylock-/selector switch 3 positions → 130 switching action: mom = momentary, main = maintaining, 0 = basic position technical drawing as of page 140, mounting dimensions as of page 145, circuit drawing as of page 150 122 01.2000 61 Accessories at front lens plastic lens plastic matt shape concave flat lens/support transparent/translucent transparent/translucent colour blue colourless, clear green orange red yellow blue a b 18 x 24 mm part no. 61-9336.6 61-9336.7 24 x 24 mm part no. b 18 mm dia. part no. 61-9336.5 61-9336.3 61-9336.2 61-9336.4 18 x 18 mm part no. 61-9326.6 61-9326.7 25 mm dia. part no. 61-9351.4 61-9311.4 white 61-9331.4 61-9236.9 61-9321.4 61-9226.9 0,001 0,001 0,001 0,001 0,001 0,002 0,001 0,001 0,002 0,001 0,001 0,002 0,001 0,002 0,001 0,001 0,002 0,001 0,001 0,002 0,001 0,002 0,001 0,001 white 61-9231.9 61-9251.9 61-9211.9 61-9221.9 0,001 black grey 61-9236.0 61-9236.8 61-9226.0 61-9226.8 0,001 0,001 black grey 61-9231.0 61-9231.8 61-9221.0 61-9221.8 0,001 0,001 61-9311.6 61-9326.5 61-9326.3 61-9326.2 61-9326.4 61-9321.6 61-9642.6 colourless, clear green 61-9331.6 61-9331.7 61-9351.6 61-9311.7 61-9321.7 61-9642.7 61-9331.5 61-9351.7 61-9351.5 61-9311.5 61-9321.5 61-9642.5 orange 61-9321.3 61-9642.3 61-9331.3 61-9351.3 61-9311.3 red 61-9321.2 61-9642.2 smoked 61-9331.2 61-9331.1 61-9351.2 61-9311.2 61-9311.1 61-9642.1 61-9351.1 61-9321.1 yellow matt (not for film insert and LED) concave flat matt (not for film insert and illumination) concave flat translucent/ translucent translucent/ translucent opaque/ translucent opaque/ translucent e 0,001 0,001 61-9642.4 61-9251.0 61-9251.8 61-9211.0 61-9211.8 61 123 01.2000 61 Accessories lens plastic for flush mounting lens plastic for flush mounting matt matt (not for film insert and LED) matt (not for film insert and illumination) shape flat lens/support transparent/translucent flat translucent/translucent opaque/translucent flat a b colour blue colourless, clear green orange red smoked yellow white 24 x 30 mm part no. 61-9681.6 61-9681.7 61-9681.5 61-9681.3 61-9681.2 24 x 24 mm part no. 61-9671.6 61-9671.7 61-9671.5 61-9671.3 61-9671.2 61-9681.4 61-9781.9 61-9671.4 61-9771.9 black grey 61-9781.0 61-9781.8 61-9771.0 61-9771.8 25 mm dia. part no. 61-9642.6 61-9642.7 61-9642.5 61-9642.3 61-9642.2 61-9642.1 61-9642.4 e 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 lens metal with window lens metal with window matt shape flat lens aluminium anodized colour natural 25 mm dia. part no. 61-9841.8A 0,002 25 mm dia. part no. 61-9841.0 61-9841.6 61-9841.5 61-9841.8 61-9841.2 61-9841.4 0,002 0,002 0,002 0,002 0,002 0,002 32 mm dia. part no. 61-9593.0 61-9593.5 61-9593.2 61-9593.4 0,004 0,004 0,004 0,004 e lens metal shape flat lens metal matt lens aluminium anodized colour black blue green natural red yellow e mushroom-head cap mushroom-head cap plastic mushroom opaque colour black green red yellow e keylock front bezel for keylock switch actuator keylock front bezel 61-9250.0 not for flush mounting 124 01.2000 a b 18 x 24 mm part no. 61-9230.0 24 x 24 mm part no. 61-9250.0 b 18 mm dia. part no. 61-9210.0 18 x 18 mm part no. 61-9220.0 e 0,001 61 Accessories lever lever with marking dot and transparent bar colour black colour of bar black, opaque blue green orange red white, opaque yellow blue green grey, opaque orange red white, opaque yellow grey e part no. 52-928.0 52-928.60 52-928.50 52-928.30 52-928.20 52-928.9 52-928.40 52-929.60 52-929.50 52-929.8 52-929.30 52-929.20 52-929.9 52-929.40 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 part no. 61-9028.0 61-9028.60 61-9028.50 61-9028.30 61-9028.20 61-9028.9 61-9028.40 61-9029.60 61-9029.50 61-9029.8 61-9029.30 61-9029.20 61-9029.9 61-9029.40 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 part no. 61-9707.7 0,001 61 lever for flush mounting lever for flush mounting with marking dot and transparent bar colour black colour of bar black, opaque blue green orange red white, opaque yellow blue green grey, opaque orange red white, opaque yellow grey e marking plate for lens round, 61-9642... marking plate clear, of plastic, can be hot pressed front shape round marking plate transparent colour clear e front bezel for selector switch square front front bezel material plastic colour black b b 24 x 24 mm part no. 52-950.0 26 x 26 mm part no. 52-952.0 e 0,001 125 01.2000 61 Accessories front bezel-set for flush mounting front bezel-set for flush mounting use illuminated pushbutton/indicator material aluminium anodized plastic keylock switch aluminium anodized plastic selector switch aluminium anodized plastic colour natural black aluminium plated black natural black aluminium plated black natural black a b 24 x 30 mm part no. 24 x 24 mm part no. 61-9931.4 61-9930.4 61-9931.0 61-9930.0 61-9931.4 61-9930.4 61-9931.0 61-9930.0 61-9936.0 Ø 25 mm part no. 61-9933.0 61-9933.1 e 0,006 0,007 0,007 61-9933.10 61-9932.0 61-9932.1 0,006 0,007 0,007 0,007 61-9932.10 61-9932.0 61-9932.1 61-9932.10 0,006 0,006 0,007 0,007 front ring for actuator 24 mm dia. material aluminium anodized front ring colour black natural e part no. 61-9600.0 61-9600.1 0,003 0,003 colour transparent part no. 61-9926.7 0,001 colour transparent part no. 84-9103.7 0,001 protective front membrane cap for actuator 24 mm dia. protective front membrane cap material silicone nature e protective front membrane cap for flush mounting protective front membrane cap for flush mounting for front bezel-set for flush mounting material silicone nature e protective cover hinged, transparent, with means for sealing a 18 x 24 mm part no. 51-925 b 18 x 18 mm part no. 61-9920.0 51-920 technical drawing as of page 140 126 01.2000 b 24 x 24 mm part no. technical drawing protective cover e 15 16 14 0,005 0,006 0,005 61 Accessories protective cover for flush mounting protective cover for flush mounting hinged, transparent, with means for sealing a b 24 x 30 mm part no. 61-9922.0 24 x 24 mm part no. 61-9921.0 e 0,006 61 blind plug projecting for mounting hole 16 mm dia. colour black a b 18 x 24 mm part no. 51-947.0 24 x 24 mm part no. 61-9450.0 18 mm dia. part no. 51-949.0 b a b 24 x 30 mm part no. 24 x 24 mm part no. 61-9451.0 18 x 18 mm part no. 51-948.0 mounting dimension blind plug projecting e 1 0,003 mounting dimensions as of page 145 blind plug flat for mounting hole 21 x 21 mm for mounting hole 21 x 27 mm for mounting hole 22.5 mm dia. colour black black black 28 mm dia. part no. 61-9452.0 704.960.7 mounting dimension blind plug flat e 3 0,006 3 3 0,006 0,006 mounting dimensions as of page 145 127 01.2000 61 Accessories EMC key protection cap part no. 31-985.0 EMC key protection cap plastic black, for lock type DOM e spare key spare key for emergency stop switch with key to release, lock type KABA standard lock 1001, other lock numbers on request for keylock switch, lock type DOM standard lock 311, other lock numbers on request e part no. 14-987.1001 0,006 31-989.311 0,006 description see page 109 master key part no. 31-989.300 master key for lock numbers 311-445 e 0,006 at back part no. 61-8006.01 lamp element with screw terminal circuit drawing lamp element e 1 0,005 circuit drawing as of page 150 components layouts as of page 146, circuit drawing as of page 150 128 01.2000 1 2 part no. 61-8101.02 61-8102.02 components layout diode element with soldering-/plug-in terminal circuit drawing number of diodes diode element e 20 21 1 2 0,007 0,008 61 Accessories 2 SA with lamp terminal, max. 42 VAC/DC/100 mA - T with lamp terminal, max.250 VAC/5A - T without lamp terminal, max. 250 VAC/6 A - T ST/PT 1NC + 1NO ST/PT 1NC + 2NO ST/PT 1NO ST/PT 2NC ST/PT 2NC + 1NO ST/PT 2NO ST/PT 3NC ST/PT 3NO ST/PT 1NC 1NO 1NO + 2D 1NO + 2D 1NC 1NC + 1NO 1NO 2NC 2NO 1NC 1NC + 1NO 1NO 2NC 2NO 1NC 1NC + 1NO 1NO 2NC 2NO SCH SCH ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT SCH SCH SCH SCH SCH material of contacts gold/silver silver gold/silver silver gold/silver silver gold/silver silver gold/silver silver gold/silver silver gold/silver silver gold/silver silver gold/silver silver silver silver silver gold/silver gold gold gold gold gold silver silver silver silver silver silver silver silver silver silver part no. 61-8440.22 61-8440.12 61-8470.22 61-8470.12 61-8490.22 61-8490.12 61-8410.22 61-8410.12 61-8450.22 61-8450.12 61-8480.22 61-8480.12 61-8420.22 61-8420.12 61-8460.22 61-8460.12 61-8430.22 61-8430.12 61-8640.11 61-8610.11 61-8212.12 61-8212.22 61-8640.37 61-8670.37 61-8610.37 61-8650.37 61-8620.37 61-8640.17 61-8670.17 61-8610.17 61-8650.17 61-8620.17 61-8645.11 61-8675.11 61-8615.11 61-8655.11 61-8625.11 components layout T 1NC circuit drawing SA connection method - contacts switching system switching element for illuminated-/pushbutton, keylock-/ selector switch 2 positions with lamp terminal, max. 250 VAC/6A diode (1N 4007) switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions e 23 23 31 31 33 33 28 28 25 25 32 32 35 35 26 26 36 36 22 28 29 29 23 31 28 25 35 23 31 28 25 35 22 30 27 24 34 3 3 15 15 16 16 12 12 4 4 6 6 13 5 5 14 14 13 17 17 10 9 7 11 8 10 9 7 11 8 - 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,007 0,008 0,008 0,007 0,007 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 61 switching system: SA = snap-action switching element, T = slow-make switching element connection method: SCH = screw terminal, ST/PT = soldering-/plug-in terminal contacts: NC = normally closed, NO = normally open components layouts as of page 146, circuit drawing as of page 150 129 01.2000 61 Accessories max. 42 VAC/DC/100 mA T T material of contacts silver silver silver silver silver silver gold gold gold part no. 61-8745.17 61-8775.17 61-8755.17 61-8745.11 61-8775.11 61-8755.11 61-8745.37 61-8775.37 61-8755.37 components layout ST/PT ST/PT ST/PT SCH SCH SCH ST/PT ST/PT ST/PT e 37 39 38 37 39 38 37 39 38 19 18 20 19 18 20 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 part no. 61-8574.22 61-8574.12 61-8550.22 61-8550.12 61-8520.22 61-8520.12 61-8770.37 61-8750.37 61-8720.37 61-8770.17 61-8750.17 61-8720.17 61-8775.11 61-8755.11 61-8725.11 components layout T circuit drawing switching element for emergency stop switch max. 250 VAC/5A max. 250 VAC/6A circuit drawing connection method 1NC 1NC + 1NO 2NC 1NC 1NC + 1NO 2NC 1NC 1NC + 1NO 2NC switching system contacts switching element for emergency stop switch e 31 31 25 25 35 35 31 25 35 31 25 35 31 24 35 23 23 21 21 22 22 24 26 25 24 26 25 - 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 0,008 switching system: T = slow-make switching element connection method: SCH = screw terminal, ST/PT = soldering-/plug-in terminal contacts: NC = normally closed, NO = normally open components layouts as of page 146, circuit drawing as of page 150 contacts connection method switching element for keylock-/ selector switch 3 positions with lamp terminal, max. 250 VAC/ 6A switching system switching element for keylock-/selector switch 3 positions SA 1NC + 1NO ST/PT 2NC ST/PT 2NO ST/PT 1NC + 1NO 2NC 2NO 1NC + 1NO 2NC 2NO 1NC + 1NO 2NC 2NO ST/PT ST/PT ST/PT ST/PT ST/PT ST/PT SCH SCH SCH with lamp terminal, max. 42 VAC/ DC/100 mA T with lamp terminal, max.250 VAC/ 5A T without lamp terminal, max. 250 VAC/6 A T material of contacts gold/silver silver gold/silver silver gold/silver silver gold gold gold silver silver silver silver silver silver switching system: SA = snap-action switching element, T = slow-make switching element connection method: SCH = screw terminal, ST/PT = soldering-/plug-in terminal contacts: NC = normally closed, NO = normally open components layouts as of page 146, circuit drawing as of page 150 130 01.2000 61 Accessories connection method flasher element operation voltage 12 VAC/DC - 28 VAC/DC flasher element ST part no. 61-8000.05 e connection method: ST = soldering terminal typical applications see page 151 circuit drawing as of page 150 61 PCB plug-in base PCB plug-in base 13.1 mm dia. x 12.8 mm 15 mm x 23 mm x 9.4 mm 17.7 mm x 23.6 mm x 10.9 mm for indicator complete pin orientation axial part no. 61-9820.1 components layout for plug-in terminal e 27 0,002 slow-make switching element snap-action switching element axial axial 61-9823 61-9821.1 29 28 0,002 0,003 part no. 61-9830 0,002 components layouts as of page 146 multi-plug housing multi-plug housing for snap-action switching element, max. 6 connections possible e cable shoe cable shoe connection method plug in terminal 2,8 x 0,5 mm plug-in terminal 2,8 x 0,5 mm for multi-plug housing part no. 31-946 51-943.1 e 0,001 0,001 131 01.2000 61 Accessories terminal cover terminal cover use for indicator element for snap-action switching element e part no. 61-9831.2 61-9830.2 0,001 0,002 part no. 10-1306.1349 (41-963.0) 10-1307.1369 (31-963.0) 10-1309.1309 (41-963.1) 10-1310.1319 (31-963.1) 10-1311.1249 (41-963.2) 10-1312.1229 (41-963.3) 10-1313.1209 (41-963.4) 10-1313.1249 (31-963.2) 10-1316.1179 (41-963.36) 10-1316.1209 (31-963.5) 10-1319.1179 (41-963.5) 10-1319.1199 (31-963.3) 10-1320.1179 (31-963.4) 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 for illumination incandescent lamp incandescent lamp base MG T 1 3/4 132 01.2000 voltage/current 6 AC/DC/125 mA 6.3 AC/DC/200 mA 12 AC/DC/75 mA 14 AC/DC/80 mA 18 AC/DC/40 mA 24 AC/DC/35 mA 28 AC/DC/30 mA 28 AC/DC/40 mA 36 AC/DC/20 mA 36 AC/DC/30 mA 48 AC/DC/20 mA 48 AC/DC/25 mA 60 AC/DC/20 mA e 61 Accessories LED LED base MG T1 3/4 number of chips 6 chips voltage/current 6 VDC/45 mA 12 VDC/30 mA 24 VAC/DC/12.5 mA 24 VDC/14 mA 28 VAC/DC/12.5 mA 28 VDC/14 mA 48 VDC/12 mA 8 chips 6 VDC/48 mA 12 VDC/24 mA 24 VDC/12 mA 28 VDC/12 mA 1 chip 24 VDC/14 mA 28 VDC/14 mA colour green red yellow green red yellow green red yellow green red yellow green red yellow green red yellow green red yellow green red yellow green red yellow green red yellow green red yellow white white e part no. 10-5306.3255 (31-968.05) 10-5306.3252 (31-968.02) 10-5306.3254 (31-968.04) 10-5309.3205 (31-968.15) 10-5309.3202 (31-968.12) 10-5309.3204 (31-968.14) 10-5312.1115 (22-996.51) 10-5312.1112 (22-996.21) 10-5312.1114 (22-996.41) 10-5312.3135 (31-968.25) 10-5312.3132 (31-968.22) 10-5312.3134 (31-968.24) 10-5313.1115 (22-997.51) 10-5313.1112 (22-997.21) 10-5313.1114 (22-997.41) 10-5313.3135 (22-997.5) 10-5313.3132 (22-997.2) 10-5313.3134 (22-997.4) 10-5319.3105 (31-968.45) 10-5319.3102 (31-968.42) 10-5319.3104 (31-968.44 10-6306.3265 (61-994.5) 10-6306.3262 (61-994.2) 10-6306.3264 (61-994.4) 10-6309.3185 (61-995.5) 10-6309.3182 (61-995.2) 10-6309.3184 (61-995.4) 10-6312.3105 (61-996.5) 10-6312.3102 (61-996.2) 10-6312.3104 (61-996.4) 10-6313.3105 (96-997.5) 10-6313.3102 (61-997.2) 10-6313.3104 (61-997.4) 10-2312.3139 10-2313.3139 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 part no. 02-917.0 0,004 part no. 02-904.0 02-904.1 02-904.3 02-904.7 0,003 0,003 0,003 0,003 61 capacitor for lamp voltage reduction capacitor use with 60 VAC/20 mA, 50 Hz lamp voltage value 230 VAC/0.27 µF e Wire in accordance with local electrical safety regulations. series resistor for lamp voltage reduction series resistor use with 60 VAC/20 mA lamp rating value 110 V/2.7 kOhm 125 V/3.3 kOhm 145 V/4.7 kOhm 230-240 V/10 kOhm e Wire in accordance with local electrical safety regulations. 133 01.2000 61 Accessories terminal plate empty for fitting with series resistors and capacitors no. of spaces 5 spaces 10 spaces 15 spaces 20 spaces terminal plate empty e part no. 02-912.1 02-912.2 02-912.3 02-912.4 0,025 0,045 0,090 0,095 part no. 02-914.10 02-914.20 02-914.30 02-914.40 0,045 0,090 0,135 0,180 part no. 02-913.10 02-913.20 02-913.30 02-913.40 02-913.11 02-913.21 02-913.31 02-913.41 02-913.17 02-913.27 02-913.37 02-913.47 0,040 0,075 0,115 0,155 0,040 0,075 0,115 0,155 0,040 0,075 0,115 0,155 43 mm dia. part no. 61-9970.3 61-9970.2 61-9970.1 61-9970.0 0,002 0,002 0,002 0,002 terminal plate with capacitor terminal plate with capacitor use with 60 VAC/20 mA lamp rating value 0,27 µF/230 VAC/60 VAC no. of components 5 spaces 10 spaces 15 spaces 20 spaces e terminal plate with series resistor terminal plate with series resistor use with 60 VAC/20 mA lamp rating value 2.7 kOhm/110/60 V 3.3 kOhm/125/60 V 10 kOhm/230-240/60 V no. of components 5 spaces 10 spaces 15 spaces 20 spaces 5 spaces 10 spaces 15 spaces 20 spaces 5 spaces 10 spaces 15 spaces 20 spaces e Wire in accordance with local electrical safety regulations. for emergency stop switch label for emergency stop switch label for emergency stop switch 43 mm dia., yellow marking ARRET D´URGENCE Emergency Stop NOT-AUS without marking e protective shroud for emergency stop switch protective shroud for emergency stop switch aluminium anodized, yellow 134 01.2000 part no. 61-9965 e 61 Accessories enclosure for emergency stop switch enclosure for emergency stop switch with mounting hole size 16 mm dia. colour RAL 1004. dimensions: 65 mm long, 65 mm wide, 57 mm high front protection IP 65 part no. 61-9480.4 e 0,079 cable gland PG11 part no. 61-9481.8 cable gland PG11 61 assembling anti-twisting ring anti-twisting ring for key- and selector switch e part no. 51-910.0 0,002 part no. 61-9960 0,003 reducing ring for 16 mm pushbuttons in mounting hole 22.5 mm dia. reducing ring only for use of front dimension: 24 x 24 mm/24 mm dia. e tool-set tool-set consists of lens remover, lamp remover, mounting tool, dismantling tool part no. K61-999.100 e lens remover lens remover use for 24 x 24 mm, 25 mm dia. front and overhanging lenses for standard lenses part no. 61-9730.0 02-905 e 0,011 0,011 135 01.2000 61 Accessories lamp/LED remover lamp/LED remover part no. 61-9740.0 e 0,003 dismantling tool for lens for dismantling of lens and lensholder dismantling tool for standard lens dismantling tool for lens for flush mounting part no. 51-938 61-9832 e 0,027 0,024 dismantling tool for switching element dismantling tool for switching element e part no. 61-9711.0 0,004 part no. 01-907 0,020 part no. 51-943.9 0,001 mounting tool mounting tool for tightening (or loosening) fixing nuts e cable shoe remover cable shoe remover for removing the connector from the multi-plug housing 136 01.2000 e 61 Technical Data actuator with snap-action switching element switching system Self- cleaning, double-break, snap-action switching elements (contact gap 2 x 0.5 mm). The elements can be supplied with the following choice of switching functions: for illuminated pushbutton or switch actuator with 2 positions: max. 3 normally open contacts, max. 3 normally closed contacts or combined switch actuator with 3 positions: max. 2 normally open contacts, max. 2 normally closed contacts or combined The switching element can be easily snapped to or dismantled from the actuator. material actuator case polyetherimide PEI, self-extinguishing front bezel polyetherimide PEI and chromium plated front ring of aluminium lenses polymethylmethacrylat PMMA, polycarbonate PC, aluminium (mushroom head cap: polyamide PA) material of contacts gold-plated silver or silver switching element diallyl phthalate DAP, self-extinguishing, polysulfone PSU mechanical characteristics actuating force measured at the lens of the illuminated pushbutton: 2.7-10 N, depending on the number of switching elements actuating torque measured at the lever or key of the selector-or keylock switch: 2.5 - 10 Ncm, depending on the number of switching elements actuating travel illuminated pushbutton :3 mm switch actuator with 2 positions: 1 x ca. 42° deflection momentary action 1 x ca. 90° deflection maintained action switch actuator with 3 positions: 2 x ca. 42° deflection momentary action 2 x ca. 90° deflection maintained action ambient air temperature -25°C to +55°C for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per DIN IEC 68-) connection method universal terminal (soldering-/plug-in terminal): max. wire diameter: 2 of 1 mm max. wire cross-section of stranded cable: 1 x 0.75 mm2 soldering-/plug-in terminal: 2.8 x 0.5 mm degree of protection indicator, illuminated pushbutton, emercency stop switch, selectorand keylock switch: front IP 65 switching element IP 40 soldering terminal IP 20 mechanical life as per IEC 512-5-6 momentary action 2 mio. cycles of operation maintained action 1 mio. cycles of operation keylock switch 50000 cycles of operation selector switch 100000 cycles of operation rebound time <= 5ms resistance to shock (single impacts, semi-sinusoidal) 50 g, 11 ms as per IEC 512-4-3, IEC 68-2-27 61 resistance to vibration (sinusoidal) 10 g, at 10- 2000- 10 Hz, amplitude 0.75 mm as per IEC 512-4-4, IEC 68-2-6 storage temperature -40°C to + 85°C (as per DIN IEC 68-) electrical characteristics continuous thermal current lth2 5A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. electric strength as per VDE 0630 (IEC 512-2-11) 2500 VAC, 50 Hz, 1 min between all terminals and earth electrostatic breakdown value >= 11 KV (keylock switch) protection class II rated current 6A rated voltage 250 VAC/VDC switch rating gold-/silver contact: min. 5 VAC/10 mA max. 250 VAC/6 A silver contact: min. 20 VAC/500 mA max. 250 VAC/6 A switch rating AC, cos. ϕ 0,7: rated service voltage 250 VAC 125 VAC rated service current 2A 3A switch rating DC, L:R=30 ms: rated service voltage: 220 110 60 rated service current resistive: 0.5 0.7 2.0 rated service current L:R=30ms: 0.15 0.3 0.7 volume resistance starting value (initial) for: gold-/silver contact <= 50 mΩ as per IEC 512-2-test 4 silver contact <= 100 mΩ as per IEC 512-2-test 5 137 01.2000 110 VAC 3A 24 VDC 6.0 A 2.0 A 61 Technical Data rules IEC 1058 EN 61 058 actuating travel illuminated pushbutton :3 mm emergency stop switch:10 mm approvals - SEV 250 VAC/6 A - CSA 300 VAC - UR 250 VAC/6 A - VDE 250 VAC/6 A - German Lloyd actuator with slow-make switching element switching system Self-cleaning, double-break, snap-action switching elements (contact gap 2 x 1.5 mm). The elements can be supplied with the following choice of switching functions: for illuminated pushbutton or switch actuator with 2 positions: max. 2 normally open contacts, max. 2 normally closed contacts or combined for switch actuator with 3 positions: max. 2 normally open contacts, max.2 normally closed contacts or combined The switching element can be easily snapped to or dismantled from the actuator. material actuator case polyetherimide PEI, self-extinguishing front bezel polyetherimide PEI and chromium plated front ring of aluminium lenses polymethylmethacrylat PMMA, polycarbonate PC, aluminium (mushroom head cap: polyamide PA) material of contacts gold (low level), silver switching element polyamide PA, polysulfone PSU mechanical characteristics switch actuator with 2 positions: 1 x ca. 42° deflection momentary action 1 x ca. 90° deflection maintained action switch actuator with 3 positions: 2 x ca. 42° deflection momentary action 2 x ca. 90° deflection maintained action ambient air temperature -25°C to +55°C for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per DIN IEC 68-) connection method universal terminal (soldering-/plug-in terminal): max. wire diameter: 2 of 1 mm max. wire cross-section of stranded cable: 1 x 0.75 mm2 soldering-/plug-in terminal: 2.8 x 0.5 mm screw terminal: max. wire cross-section of stranded cable: 1 x 1 mm2 degree of polution 3 degree of protection indicator, illuminated pushbutton, emercency stop switch, selectorand keylock switch: front IP 65 switching element IP 40 screw terminal IP 20 as per VDE 0106 Teil 100 mechanical life as per IEC 512-5-6 momentary action 2 mio. cycles of operation maintained action 1 mio. cycles of operation keylock switch 50000 cycles of operation selector switch 100000 cycles of operation emergency stop switch 50000 cycles of operation rebound time <= 2 ms resistance to shock (single impacts, semi-sinusoidal) 50 g, 11 ms as per IEC 512-4-3, IEC 68-2-27 actuating force measured at the lens of the illuminated pushbutton: 3.5-20 N, depending on the number of switching elements resistance to vibration (sinusoidal) 10 g, at 10- 2000- 10 Hz, amplitude 0.75 mm as per IEC 512-4-4, IEC 68-2-6 measured at the mushroom head cap of the emergency stop switch: max. 65 N storage temperature -40°C to + 85°C (as per DIN IEC 68-) actuating torque measured at the lever or key of the selector-or keylock switch: 4-16 Ncm, depending on the number of switching elements emergency stop switch: 15 Ncm electrical characteristics continuous thermal current lth2 universal terminal 5 A screw terminal 10 A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. electric strength as per VDE 0630 (IEC 512-2-11) 4000 VAC, 50 Hz, 1 between all terminals and earth electrical life switching element of emergency stop switch 6´050 cycles of operation 138 01.2000 61 Technical Data electrostatic breakdown value >= 11 KV (keylock switch) max. permissible rated current 10 A gL electrical characteristics flashing frequency 1 Hz ± 0.25 Hz over voltage category III illumination incandescent lamp: 14 V, 80 mA or 28 V, 40 mA Multi-LED: 12 V, 25 mA or 24 V, 12.5 mA protection class II making cycle 1:1 rated current 6A operating voltage AC or DC 12 - 10% or 28 V + 10% rated voltage 300 V switch rating gold contact (universal terminal, Low Level): min. 100 µV/10 µA max. 42 VAC/100 mA; silver contact (universal terminal): min. 20 VAC/10 mA max. 250 VAC/5 A silver contact (screw terminal): min. 20 VAC/10 mA max. 250 VAC/6 A switch rating AC: rated service voltage 250 120 60 24 VAC rated service current AC 13 3A 5A 6A 6A rated service current AC 14* 2A 3A 4A 5A rated service current AC 15** 2A *only for emergency stop switch with universal terminal **only for emergency stop switch with screw terminal switch rating DC : rated service voltage: 240 110 60 24 VDC rated service current resistive: 0,5 0,7 2,0 6,0 A rated service current L:R=30 ms: 0.2 0.4 1.0 2.0 A 61 volume resistance starting value (initial) for: gold contact <= 50 mΩ as per IEC 512-2-test 4 silver contact <= 50 mΩ as per IEC 512-2-test 5 rules IEC 947-5-1 EN 60 947 approvals - SEV 250 VAC - CSA - UL - VDE actuator with flasher element material actuator case polyetherimide PEI, self-extinguishing lenses polymetylmethacrylat PMMA, polycarbonate PC mechanical characteristics ambient air temperature 0°C to + 45°C (as per DIN IEC 68-) connection method soldering terminal 2.8 x 0.8 mm 139 01.2000 Technical Drawing, Dimension, Layout technical drawing 1 indicator complete page 111 2 indicator-/flasher-actuator page 111 3 illuminated-/pushbutton actuator page 112 140 01.2000 61 61 Technical Drawing, Dimension, Layout 4 emergency stop switch actuator foolproof page 112 61 5 pushbutton actuator with mushroom-head cap page 113 141 01.2000 Technical Drawing, Dimension, Layout 6 keylock switch actuator 2 positions, keylock switch actuator 3 positions page 113, 114 7 selector switch actuator 2 positions, selector switch actuator 3 positions page 115, 116 8 indicator complete for flush mounting page 117 142 01.2000 61 61 Technical Drawing, Dimension, Layout 9 indicator-/flasher-actuator for flush mounting page 117 61 10 illuminated-/pushbutton actuator for flush mounting page 118 11 mushroom pushbutton actuator for flush mounting page 118 143 01.2000 Technical Drawing, Dimension, Layout 12 keylock switch actuator with 2 positions for flush mounting, keylock switch actuator 3 positions for flush mounting page 119, 120 13 selector switch actuator 2 positions for flush mounting, selector switch actuator 3 positions for flush mounting page 121, 122 14 protective cover page 126 15 protective cover page 126 144 01.2000 61 61 Technical Drawing, Dimension, Layout 16 protective cover page 126 mounting dimension 1 indicator complete, indicator-/flasher-actuator, illuminated-/pushbutton actuator, keylock switch actuator 2 positions, keylock switch actuator 3 positions, selector switch actuator 2 positions, selector switch actuator 3 positions, blind plug projecting page 111, 112, 113, 114, 115, 116, 127 61 2 emergency stop switch actuator foolproof, pushbutton actuator with mushroom-head cap, mushroom pushbutton actuator for flush mounting page 112, 113 3 indicator complete for flush mounting, indicator-/flusher-actuator for flush mounting, illuminated-/pushbutton actuator for flush mounting, keylock switch actuator with 2 positions for flush mounting, keylock switch actuator 3 positions for flush mounting, selector switch actuator 2 positions for flush mounting, selector switch actuator 3 positions for flush mounting, blind plug flat page 117,118,119,120, 121, 122, 127 145 01.2000 Technical Drawing, Dimension, Layout components layouts 1 diode element page 128 2 diode element page 128 3 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 4 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 5 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 6 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 7 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 8 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 9 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 146 01.2000 61 61 Technical Drawing, Dimension, Layout 10 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 11 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 12 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 61 13 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 14 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 15 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 16 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 17 switching element for illuminated-/pushbutton, keylock-/selector switch 2 positions page 129 18 switching element for emergency stop switch page 130 147 01.2000 Technical Drawing, Dimension, Layout 19 switching element for emergency stop switch page 130 20 switching element for emergency stop switch page 130 21 switching element for keylock-/selector switch 3 positions page 130 22 switching element for keylock-/selector switch 3 positions page 130 23 switching element for keylock-/selector switch 3 positions page 130 24 switching element for keylock-/selector switch 3 positions page 130 25 switching element for keylock-/selector switch 3 positions page 130 26 switching element for keylock-/selector switch 3 positions page 130 27 PCB plug-in base page 131 148 01.2000 61 61 Technical Drawing, Dimension, Layout 28 PCB plug-in base page 131 29 PCB plug-in base page 131 61 149 01.2000 61 Circuit Drawing circuit drawing circuit drawing 1 21 2 22 3 23 4 24 5 25 6 26 7 27 8 28 9 29 10 30 11 31 12 32 13 33 14 34 15 35 16 36 17 37 18 38 19 39 20 150 01.2000 61 Typical Applications With indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space. 61 151 01.2000 Typical Applications Flasher element 152 01.2000 61 61 Marking 1. Engraving 2. Hot stamping Typefaces For large batches it is worth while to have the lettering produced by hot stamping. In addition to the most commonly used world languages (see DIN 1451) with close spacing, the following typefaces are available: Scandinavian, Slavian, Greek, Russian. Typefaces For letters and figures, typefaces with 2,5 mm, 3 mm and 4 mm are available. Symbols Coloured filling of engraving A list of the symbols available can be supplied on request. Specify whether engraving should be on the diffuser, or on the lens. Specify the infill colour, charcter height and the text or symbol orientation. 61 Symbols A list of the symbols available can be supplied on request. Important! Before engraving, check the position of the illuminated pushbutton or indicator (18 x 24) 15,3 x 21,5 mm 3 9-10 4 0,5 2 5 0,5 6 8 7-8 8 3 6 6 10-11 4 6-7 7 2 5 7 7-8 3 4-5 5 2 2 5-6 6 2 3-4 4 0,6 1 4-5 5 2 3 0,6 1 3-4 3-4 1 2-3 a max. 12,7 x 18,7 mm Number of letters per line 0,4 Number of letters per line 5 Film dimension (small) (caps) (small) 4 7-8 8 6 3 6-7 7 3 4 2 4-5 5 1 2 3 2 3-4 4 3-4 1 2 2 1 3 3-4 2-3 1 2 2 1 2-3 2-3 Ø 12,8 mm Number of lines 12 3 Number of letters per line Number of letters per line 11 0,4 Number of letters per line Number of letters per line 4 2,5 (caps) Number of lines Number of letters per line (small) s (18 x 18) 15,3 x 15,3 mm Vertical mounting (caps) h Number of lines (small) Thickness of letters mm (caps) Height of letters mm Number of letters per line Horizontal mounting (Ø 18) Ø 15,8 mm Number of lines (switch) lens b 12,7 x 12,7 mm 153 01.2000 61 Marking 3. Film inserts . Instead of using engraving, the lenses can be fitted with transparent film inserts. For this purpose, though, it is advisable to use transparent lenses. When a smoked lens is used, the lettering does not become visible until the lamp lights. Film dimensions 16,9x16,9 mm 11,9x11,9 mm max 11,9x18,0 mm Film thickness 0.2 mm Important! Before engraving, check the position of the illuminated pushbutton or indicator. (24 x 24 mm) (24 x 30 mm) (24 x 24) 20 x 20 mm 18 x 24 mm 18 x 18 mm 2 3 5 0,5 1 2 6 0,6 1 2 3 1 8 0,6 1 2 2 1 4 9 10 4 12 13 3 7-8 9 3 10-11 11-12 4 2 4-5 5 2 7 8 3 2 4 4-5 2 5-6 4 4 1 2 2 1 b 16,9 x 16,9 mm 154 01.2000 (caps) (small) (caps) (small) 5 8-9 9 4 7-8 8 3 4-5 6 2 4 4-5 5 2 3 3-4 1 4 4 3-4 3-4 1 2-3 2-3 1 2-3 2-3 a 15,1 x 21 mm Number of letters per line 0,5 Number of letters per line 6 Number of letters per line (small) Number of lines 6 5 Number of letters per line 6 2 Film dimension (caps) Number of lines 3 Number of lines (small) Number of letters per line 4 (caps) Number of lines 0,4 Number of letters per line 0,4 3 Number of letters per line 2,5 Number of letters per line Thickness of letters s Number of letters per line Height of letters h Number of letters per line Vertical mounting Horizontal mounting (caps) (small) 4 8-9 9 3 7-8 8 5 2 4-5 5 4-5 2 4 4-5 Number of lines (switch) Ø 25 Marking plate for lens 19,7 mm dia. b 15,1 x 15,1 mm