ETC ADM6315-46D4ART-RL

a
Open-Drain Microprocessor
Supervisory Circuit in 4-Lead SOT-143
ADM6315
FEATURES
Superior Upgrade for MAX6315
Specified Over Temperature
Low Power Consumption (5 ␮A Typ)
Precision Voltage Monitor of Voltages from 2.5 V to
5 V at 100 mV Increments
Reset Assertion Down to VCC > 1 V
Built-In Manual Reset
Pin Compatible with the ADM811
FUNCTIONAL BLOCK DIAGRAM
VREF
ADM6315
RESET
APPLICATIONS
Microprocessor Systems
Controllers
Intelligent Instruments
Automotive Systems
Safety Systems
Portable Instruments
GENERAL DESCRIPTION
VCC
GND
RESET
CIRCUITRY
VCC
SYSTEM POWER
The ADM6315 is a reliable voltage monitoring device that is
suitable for use in most voltage monitoring applications.
The ADM6315 is designed to monitor as little as a 1.8% degradation of a power supply voltage. Voltages that can be monitored by the ADM6315 are all voltages (at 100 mV increments)
from 2.5 V to 5 V.
Included in this circuit is a debounced Manual Reset input.
Reset can be activated using an ordinary switch (pulling MR
low), by a low input from another digital device, or by a degradation of the supply voltage. The manual reset function is very
useful, especially if the circuit in which the ADM6315 is operating enters into a state that can only be detected by the user.
Allowing the user to manually reset a system can reduce the
damage or danger that could otherwise be caused by an out of
control or locked-up system.
MR
DEBOUNCE
ADM6315
MR
RESET
10k⍀
␮P
SYSTEM
RESET
GND
GND
Figure 1. Typical Operating Circuit
The ADM6315 comes in a cost and space efficient SOT-143
package.
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2001
ADM6315–SPECIFICATIONS (V
Parameter
Min
SUPPLY
Operating Voltage
VCC Supply Current
1.0
CC
= Full Operating Range, TA = TMIN to TMAX, VCC Typ = 5 V unless otherwise noted.)
Typ
Max
Unit
Test Conditions/Comments
5
4
5.5
12
12
V
µA
µA
TA = 0°C to 70°C
VCC = 5.5 V (No Load)
VCC = 3.6 V (No Load)
VTH + 1.8%
VTH + 2.5%
V
V
TA = 25°C
TA = 0°C to 70°C
RESET VOLTAGE THRESHOLD (VTH)*
VTH – 1.8%
VTH – 2.5%
VTH
RESET THRESHOLD TEMPERATURE
COEFFICIENT
60
ppm/°C
VCC TO RESET DELAY
35
µs
VCC = Falling at 1 mV/µs
ms
ms
ms
ms
ADM6315xxD1
ADM6315xxD2
ADM6315xxD3
ADM6315xxD4
VTH > 4.0 V (VIL)
VTH > 4.0 V (VIH)
VTH < 4.0 V (VIL)
VTH < 4.0 V (VIH)
100
V
V
V
V
µs
ns
ns
kΩ
0.4
0.3
0.3
1
V
V
V
µA
VCC > 4.25 V, ISINK = 3.2 mA
VCC > 2.5 V, ISINK = 1.2 mA
VCC > 1 V, ISINK = 80 mA
VCC > VTH, RESET Deasserted
RESET ACTIVE TIMEOUT PERIOD
MANUAL RESET
Input Threshold
1
20
140
1120
1.4
28
200
1570
2.6
53
370
2960
0.8
2.4
0.3 VCC
0.7 VCC
Minimum Input Pulse
Glitch Rejection
To Reset Delay
Pull-Up Resistance
1
32
100
500
63
RESET OUTPUT
Output Voltage
Output Leakage Current
*The ADM6315 is available with preset reset threshold values from 2.5 V to 5 V at 100 mV increments.
Specifications subject to change without notice.
–2–
REV. A
ADM6315
ABSOLUTE MAXIMUM RATINGS*
PIN CONFIGURATION
(TA = 25°C unless otherwise noted)
Terminal Voltage (With Respect to Ground)
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +6 V
All Other Inputs . . . . . . . . . . . . . . . . –0.3 V to VCC + 0.3 V
Input Current
VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Output Current
RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Power Dissipation (TA = 70°C)
RT-4, SOT-143
Derate by 4 mW/°C above 70°C . . . . . . . . . . . . . 320 mW
θJA Thermal Impedance . . . . . . . . . . . . . . . . . . . . 330°C/W
Operating Temperature Range . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +160°C
Lead Temperature (Soldering, 10 secs) . . . . . . . . . . . . 300°C
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . 215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 kV
GND 1
RESET 2
ADM6315
TOP VIEW
(Not to Scale)
4 VCC
3 MR
PIN FUNCTION DESCRIPTIONS
*Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods of time may affect device reliability.
Pin
Mnemonic
Function
1
2
GND
RESET
3
MR
4
VCC
0 V. Ground reference for all signals.
Active Low Logic Output. RESET remains
low while VCC is below the reset threshold
or when MR is low; RESET then remains
low for either 1 ms (min), 20 ms (min),
140 ms (min), or 1120 ms (min) after
VCC rises above the reset threshold and
MR is high.
Manual Reset. This active low debounced
input will ignore input pulses of 100 ns
(typical) and is guaranteed to accept input
pulses of greater than 1 µs. Leave floating
when not used.
Monitored Supply Voltage
ORDERING GUIDE
Model
Temperature
Range
Package
Description
Package
Option
ADM6315–xxxxxxx-xx*
–40°C to +85°C
Plastic Surface Mount
SOT-143
*Refer to Tables I to IV.
REV. A
–3–
ADM6315 –Typical Performance Characteristics
800
MAXIMUM TRANSIENT DURATION – ␮s
10
8
IDD – ␮A
VCC = 5.5
6
VCC = 3
4
2
VCC = 1
0
–40
700
600
500
400
300
200
100
0
–100
–20
0
20
40
60
TEMPERATURE – ⴗC
80
100
0
125
TPC 1. Supply Current vs. Temperature
4
8
20
60
100
400
800 1200
RESET COMPARATOR OVERDRIVE, VTH–VCC – mV
1600
TPC 4. Maximum Transient Duration vs.
RESET Comparator Overdrive
450
1.005
NORMALIZED THRESHOLD – V
POWER-DOWN RESET DELAY – ␮s
400
350
300
250
VOD = 20mV
200
150
100
0.995
VOD = 125mV
50
0
–40
1.000
VOD = 200mV
–20
0
20
40
60
TEMPERATURE – ⴗC
80
100
0.990
–40
125
TPC 2. Power-Down Reset Delay vs. Temperature
–20
0
20
40
60
TEMPERATURE – ⴗC
80
100
125
TPC 5. Normalized Reset Threshold vs.
Temperature (VCC Falling)
1.06
12
1.04
10
SUPPLY CURRENT – ␮A
NORMALIZED RESET TIMEOUT – ms
+85ⴗC
1.02
1.00
0.98
0.96
0.94
–40
8
6
–40ⴗC
+25ⴗC
4
2
0
–20
0
20
40
60
TEMPERATURE – ⴗC
80
100
125
0
TPC 3. Normalized Reset Timeout Period vs. Temperature
(VCC Rising)
1
2
3
SUPPLY VOLTAGE – V
4
5
TPC 6. Supply Current vs. Supply Voltage
–4–
REV. A
ADM6315
INTERFACING TO OTHER DEVICES
MANUAL RESET INPUT
OUTPUT
The ADM6315 also provides an additional input, MR. This
input can be used either as a means for the system operator to
manually reset the system via a switch or for a digital circuit to
reset the system.
The ADM6315 series is designed to integrate with as many
devices as possible. One feature of the ADM6315 is the RESET
open drain output, which can sink current from sources with a
voltage greater than the VCC of the ADM6315 input, making it
suitable for use in more diverse applications.
The MR input will (typical) ignore negative going pulses faster
than 100 ns and is guaranteed to accept any negative going
input pulse of a duration greater than or equal to 1 µs. If MR is
connected to long cables or used in a noisy environment, then
placing a 1 µF decoupling capacitor between the MR input and
ground will further improve the glitch immunity of the ADM6315.
THE BENEFITS OF A VERY ACCURATE RESET
THRESHOLD
Because the ADM6315 series can operate effectively even when
there are large degradations of the supply voltages (due to an
accurate internal voltage reference circuit), the possibility of a
malfunction during a power failure is greatly reduced.
VCC TRIP-POINT (MAX)
VCC TRIP-POINT
VCC TRIP-POINT (MIN)
VCC
VCC
VCC TRIP-POINT(MAX)
VCC TRIP-POINT
RESET ACTIVE TIMEOUT
VCC TRIP-POINT (MIN)
RST
VCC TO RESET
DELAY
RST
VOL
Figure 3. VCC Power-Up Timing Diagram
Figure 2. VCC Power-Down/Brownout Timing Diagram
TRANSIENT IMMUNITY
As well as being an accurate reset circuit, the ADM6315 has
good immunity to negative going transients (TPC 4). Because
of this characteristic, the ADM6315 is suitable for use in noisy
environments.
DETAILED DESCRIPTION
The ADM6315 is designed to protect the integrity of a systems
operation by ensuring the proper operation of the system during
power-up, power-down and brownout conditions.
TPC 4 shows the reset comparator overdrive (the maximum
magnitude of negative going pulses with respect to the typical
reset threshold) versus pulse duration, without causing a reset.
When the ADM6315 is powered-up (depending on the selected
reset active timeout), the RESET output of the ADM6315 will
remain low for a period typically equalling the Reset Active
Timeout Period. This is designed to give the system time to
power-up correctly and for the power supply to stabilize before
any devices are brought out of reset and allowed to begin executing
instructions. Initializing a system in this way provides a more
reliable startup for microprocessor systems.
When a brownout condition occurs (assuming VCC is falling at
1 mV/µs), the ADM6315 will produce a reset in typically 35 µs.
Producing a reset this fast means that the entire system can be
reset together before any part of the system’s voltage falls below
its recommended operating voltage. This can avoid dangerous
and/or erroneous operation of a microprocessor-based system.
REV. A
–5–
ADM6315
Table I.
Table II.
Model*
TripPoint
Min
Timeout
(ms)
Brand
ADM6315-50D1ART-RL7
ADM6315-50D1ART-RL
ADM6315-49D1ART-RL7
ADM6315-49D1ART-RL
ADM6315-48D1ART-RL7
ADM6315-48D1ART-RL
ADM6315-47D1ART-RL7
ADM6315-47D1ART-RL
ADM6315-46D1ART-RL7
ADM6315-46D1ART-RL
ADM6315-45D1ART-RL7
ADM6315-45D1ART-RL
ADM6315-44D1ART-RL7
ADM6315-44D1ART-RL
ADM6315-43D1ART-RL7
ADM6315-43D1ART-RL
ADM6315-42D1ART-RL7
ADM6315-42D1ART-RL
ADM6315-41D1ART-RL7
ADM6315-41D1ART-RL
ADM6315-40D1ART-RL7
ADM6315-40D1ART-RL
ADM6315-39D1ART-RL7
ADM6315-39D1ART-RL
ADM6315-38D1ART-RL7
ADM6315-38D1ART-RL
ADM6315-37D1ART-RL7
ADM6315-37D1ART-RL
ADM6315-36D1ART-RL7
ADM6315-36D1ART-RL
ADM6315-35D1ART-RL7
ADM6315-35D1ART-RL
ADM6315-34D1ART-RL7
ADM6315-34D1ART-RL
ADM6315-33D1ART-RL7
ADM6315-33D1ART-RL
ADM6315-32D1ART-RL7
ADM6315-32D1ART-RL
ADM6315-31D1ART-RL7
ADM6315-31D1ART-RL
ADM6315-30D1ART-RL7
ADM6315-30D1ART-RL
ADM6315-29D1ART-RL7
ADM6315-29D1ART-RL
ADM6315-28D1ART-RL7
ADM6315-28D1ART-RL
ADM6315-27D1ART-RL7
ADM6315-27D1ART-RL
ADM6315-26D1ART-RL7
ADM6315-26D1ART-RL
ADM6315-25D1ART-RL7
ADM6315-25D1ART-RL
5.00
5.00
4.90
4.90
4.80
4.80
4.70
4.70
4.63
4.63
4.50
4.50
4.39
4.39
4.30
4.30
4.20
4.20
4.10
4.10
4.00
4.00
3.90
3.90
3.80
3.80
3.70
3.70
3.60
3.60
3.50
3.50
3.40
3.40
3.30
3.30
3.20
3.20
3.08
3.08
3.00
3.00
2.93
2.93
2.80
2.80
2.70
2.70
2.63
2.63
2.50
2.50
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MDZ
MDZ
MDY
MDY
MDX
MDX
MDW
MDW
MDV
MDV
MDU
MDU
MDT
MDT
MDS
MDS
MDR
MDR
MDQ
MDQ
MDP
MDP
MDO
MDO
MDN
MDN
MDM
MDM
MDL
MDL
MDK
MDK
MDJ
MDJ
MDI
MDI
MDH
MDH
MDG
MDG
MDF
MDF
MDE
MDE
MDD
MDD
MDC
MDC
MDB
MDB
MDA
MDA
Model*
TripPoint
Min
Timeout
(ms)
Brand
ADM6315-50D2ART-RL7
ADM6315-50D2ART-RL
ADM6315-49D2ART-RL7
ADM6315-49D2ART-RL
ADM6315-48D2ART-RL7
ADM6315-48D2ART-RL
ADM6315-47D2ART-RL7
ADM6315-47D2ART-RL
ADM6315-46D2ART-RL7
ADM6315-46D2ART-RL
ADM6315-45D2ART-RL7
ADM6315-45D2ART-RL
ADM6315-44D2ART-RL7
ADM6315-44D2ART-RL
ADM6315-43D2ART-RL7
ADM6315-43D2ART-RL
ADM6315-42D2ART-RL7
ADM6315-42D2ART-RL
ADM6315-41D2ART-RL7
ADM6315-41D2ART-RL
ADM6315-40D2ART-RL7
ADM6315-40D2ART-RL
ADM6315-39D2ART-RL7
ADM6315-39D2ART-RL
ADM6315-38D2ART-RL7
ADM6315-38D2ART-RL
ADM6315-37D2ART-RL7
ADM6315-37D2ART-RL
ADM6315-36D2ART-RL7
ADM6315-36D2ART-RL
ADM6315-35D2ART-RL7
ADM6315-35D2ART-RL
ADM6315-34D2ART-RL7
ADM6315-34D2ART-RL
ADM6315-33D2ART-RL7
ADM6315-33D2ART-RL
ADM6315-32D2ART-RL7
ADM6315-32D2ART-RL
ADM6315-31D2ART-RL7
ADM6315-31D2ART-RL
ADM6315-30D2ART-RL7
ADM6315-30D2ART-RL
ADM6315-29D2ART-RL7
ADM6315-29D2ART-RL
ADM6315-28D2ART-RL7
ADM6315-28D2ART-RL
ADM6315-27D2ART-RL7
ADM6315-27D2ART-RL
ADM6315-26D2ART-RL7
ADM6315-26D2ART-RL
ADM6315-25D2ART-RL7
ADM6315-25D2ART-RL
5.00
5.00
4.90
4.90
4.80
4.80
4.70
4.70
4.63
4.63
4.50
4.50
4.39
4.39
4.30
4.30
4.20
4.20
4.10
4.10
4.00
4.00
3.90
3.90
3.80
3.80
3.70
3.70
3.60
3.60
3.50
3.50
3.40
3.40
3.30
3.30
3.20
3.20
3.08
3.08
3.00
3.00
2.93
2.93
2.80
2.80
2.70
2.70
2.63
2.63
2.50
2.50
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
MEZ
MEZ
MEY
MEY
MEX
MEX
MEW
MEW
MEV
MEV
MEU
MEU
MET
MET
MES
MES
MER
MER
MEQ
MEQ
MEP
MEP
MEO
MEO
MEN
MEN
MEM
MEM
MEL
MEL
MEK
MEK
MEJ
MEJ
MEI
MEI
MEH
MEH
MEG
MEG
MEF
MEF
MEE
MEE
MED
MED
MEC
MEC
MEB
MEB
MEA
MEA
NOTES
ADM6315-xxxxxxx-RL7 are in reels of 3,000 pieces.
ADM6315-xxxxxxx-RL are in reels of 10,000 pieces.
*Only available in reels.
–6–
REV. A
ADM6315
Table III.
Table IV.
Model*
TripPoint
Min
Timeout
(ms)
Brand
ADM6315-50D3ART-RL7
ADM6315-50D3ART-RL
ADM6315-49D3ART-RL7
ADM6315-49D3ART-RL
ADM6315-48D3ART-RL7
ADM6315-48D3ART-RL
ADM6315-47D3ART-RL7
ADM6315-47D3ART-RL
ADM6315-46D3ART-RL7
ADM6315-46D3ART-RL
ADM6315-45D3ART-RL7
ADM6315-45D3ART-RL
ADM6315-44D3ART-RL7
ADM6315-44D3ART-RL
ADM6315-43D3ART-RL7
ADM6315-43D3ART-RL
ADM6315-42D3ART-RL7
ADM6315-42D3ART-RL
ADM6315-41D3ART-RL7
ADM6315-41D3ART-RL
ADM6315-40D3ART-RL7
ADM6315-40D3ART-RL
ADM6315-39D3ART-RL7
ADM6315-39D3ART-RL
ADM6315-38D3ART-RL7
ADM6315-38D3ART-RL
ADM6315-37D3ART-RL7
ADM6315-37D3ART-RL
ADM6315-36D3ART-RL7
ADM6315-36D3ART-RL
ADM6315-35D3ART-RL7
ADM6315-35D3ART-RL
ADM6315-34D3ART-RL7
ADM6315-34D3ART-RL
ADM6315-33D3ART-RL7
ADM6315-33D3ART-RL
ADM6315-32D3ART-RL7
ADM6315-32D3ART-RL
ADM6315-31D3ART-RL7
ADM6315-31D3ART-RL
ADM6315-30D3ART-RL7
ADM6315-30D3ART-RL
ADM6315-29D3ART-RL7
ADM6315-29D3ART-RL
ADM6315-28D3ART-RL7
ADM6315-28D3ART-RL
ADM6315-27D3ART-RL7
ADM6315-27D3ART-RL
ADM6315-26D3ART-RL7
ADM6315-26D3ART-RL
ADM6315-25D3ART-RL7
ADM6315-25D3ART-RL
5.00
5.00
4.90
4.90
4.80
4.80
4.70
4.70
4.63
4.63
4.50
4.50
4.39
4.39
4.30
4.30
4.20
4.20
4.10
4.10
4.00
4.00
3.90
3.90
3.80
3.80
3.70
3.70
3.60
3.60
3.50
3.50
3.40
3.40
3.30
3.30
3.20
3.20
3.08
3.08
3.00
3.00
2.93
2.93
2.80
2.80
2.70
2.70
2.63
2.63
2.50
2.50
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
MFZ
MFZ
MFY
MFY
MFX
MFX
MFW
MFW
MFV
MFV
MFU
MFU
MFT
MFT
MFS
MFS
MFR
MFR
MFQ
MFQ
MFP
MFP
MFO
MFO
MFN
MFN
MFM
MFM
MFL
MFL
MFK
MFK
MFJ
MFJ
MFI
MFI
MFH
MFH
MFG
MFG
MFF
MFF
MFE
MFE
MFD
MFD
MFC
MFC
MFB
MFB
MFA
MFA
NOTES
All parts in bold are ex-stock. Consult factory for availability of orders.
ADM6315-xxxxxxx-RL7 are in reels of 3,000 pieces.
ADM6315-xxxxxxx-RL are in reels of 10,000 pieces.
*Only available in reels.
REV. A
–7–
Model*
TripPoint
Min
Timeout
(ms)
Brand
ADM6315-50D4ART-RL
ADM6315-50D4ART-RL7
ADM6315-49D4ART-RL
ADM6315-49D4ART-RL7
ADM6315-48D4ART-RL
ADM6315-48D4ART-RL7
ADM6315-47D4ART-RL
ADM6315-47D4ART-RL7
ADM6315-46D4ART-RL
ADM6315-46D4ART-RL7
ADM6315-45D4ART-RL
ADM6315-45D4ART-RL7
ADM6315-44D4ART-RL
ADM6315-44D4ART-RL7
ADM6315-43D4ART-RL
ADM6315-43D4ART-RL7
ADM6315-42D4ART-RL
ADM6315-42D4ART-RL7
ADM6315-41D4ART-RL
ADM6315-41D4ART-RL7
ADM6315-40D4ART-RL
ADM6315-40D4ART-RL7
ADM6315-39D4ART-RL
ADM6315-39D4ART-RL7
ADM6315-38D4ART-RL
ADM6315-38D4ART-RL7
ADM6315-37D4ART-RL
ADM6315-37D4ART-RL7
ADM6315-36D4ART-RL
ADM6315-36D4ART-RL7
ADM6315-35D4ART-RL
ADM6315-35D4ART-RL7
ADM6315-34D4ART-RL
ADM6315-34D4ART-RL7
ADM6315-33D4ART-RL
ADM6315-33D4ART-RL7
ADM6315-32D4ART-RL
ADM6315-32D4ART-RL7
ADM6315-31D4ART-RL
ADM6315-31D4ART-RL7
ADM6315-30D4ART-RL
ADM6315-30D4ART-RL7
ADM6315-29D4ART-RL
ADM6315-29D4ART-RL7
ADM6315-28D4ART-RL
ADM6315-28D4ART-RL7
ADM6315-27D4ART-RL
ADM6315-27D4ART-RL7
ADM6315-26D4ART-RL
ADM6315-26D4ART-RL7
ADM6315-25D4ART-RL
ADM6315-25D4ART-RL7
5.00
5.00
4.90
4.90
4.80
4.80
4.70
4.70
4.63
4.63
4.50
4.50
4.39
4.39
4.30
4.30
4.20
4.20
4.10
4.10
4.00
4.00
3.90
3.90
3.80
3.80
3.70
3.70
3.60
3.60
3.50
3.50
3.40
3.40
3.30
3.30
3.20
3.20
3.08
3.08
3.00
3.00
2.93
2.93
2.80
2.80
2.70
2.70
2.63
2.63
2.50
2.50
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
1120
MGZ
MGZ
MGY
MGY
MGX
MGX
MGW
MGW
MGV
MGV
MGU
MGU
MGT
MGT
MGS
MGS
MGR
MGR
MGQ
MGQ
MGP
MGP
MGO
MGO
MGN
MGN
MGM
MGM
MGL
MGL
MGK
MGK
MGJ
MGJ
MGI
MGI
MGH
MGH
MGG
MGG
MGF
MGF
MGE
MGE
MGD
MGD
MGC
MGC
MGB
MGB
MGA
MGA
ADM6315
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
C00081–0–10/01(A)
4-Lead Plastic Surface Mount Package
(SOT-143)
0.079 (2.00)
0.071 (1.80)
3
4
0.055 (1.40)
0.047 (1.20)
0.098 (2.50)
0.083 (2.10)
1
PIN 1
7ⴗ
0.004 (0.10)
0.001 (0.03)
2
0.080 (2.03)
0.070 (1.78)
0.120 (3.05)
0.105 (2.67)
SEATING 0.037 (0.94)
PLANE 0.030 (0.77)
0.040 (1.02)
0.031 (0.79)
0.021 (0.54)
0.015 (0.38)
0.0059 (0.089)
0.0035 (0.15)
8ⴗ
0ⴗ
0.010 (0.25)
0.005 (0.13)
Revision History
Location
Page
Data Sheet changed from REV. 0 to REV. A.
Edits to Table III . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PRINTED IN U.S.A.
Edits to Table IV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
–8–
REV. A