Bay Linear Linear Excellence B1586 1.5A Low Dropout Voltage Regulator Adjustable & Fix Output Description Features The Bay Linear B1586 is Monolithic low power 1.5A Adjustable and fixed NPN voltage regulator that are easy to use with minimum external components. It is suitable for applications requiring a well-regulated positive output voltage with low input-output differential voltage requirements and output voltage 1.5V, 2.5V, 3.0V, 3.3V, or 5V. The B1586 Outstanding features include full power usage up to 1.5Amp of load current internal current limiting and thermal shutdown. Other fixed versions are also available consult with factory. The B1586 is offered in 3-pin TO-220 & TO-263 packages compatible with other 3 terminal regulators. For 5A Low dropout Regulator refer to the B1585 data sheet. • • • • • • • Adjustable Output Down to 1.2V Fixed Output Voltages 2.5V, 3.0V 3.3V, and 5.0V Output Current of 1.5A Low Dropout Voltage 1.1V Typ. Current & Thermal Limiting Standard 3-Terminal Low Cost TO-220, D2, D Packages Similar to industry Standard LT1086 Applications • • • • • • 3.3V to 2.5V for Pentium Processor SMPS Post Regulator High Efficiency “Green” Computer Systems High Efficiency Linear Power Supplies 5V to 3.XXV fro Pentium Processor Battery Charger Ordering Information Pin Connection Devices B1586T B1586S B1586D Package Temp. TO-220 TO-263 TO-252 0 °C to 70 °C 0 °C to 70 °C 0 °C to 70 °C TO-263-3 (S) Bay Linear 1 2 3 Top View Bay Linear, Inc 2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 989-7144, Fax: (925) 940-9556 www.baylinear.com B1586 Absolute Maximum Rating Parameter Maximum Input Voltage Power Dissipation Thermal Resistance Junction to Case Thermal Resistance Junction to Ambient Operating Junction Temperature Range Control Section Power Transistor Storage Temperature Range Lead Temperature (Soldering 10 Sec.) Symbol Value Unit VIN PO θJC θJA 7 Internally Limited 3 50 V W °C/W °C TJ TSTG TLEAD 0 to 125 0 to 150 -65 to 150 260 Electrical Characteristics (VIN = 4.75V to 5.25V; IO = 10mA to 1.5Amp, unless otherwise specified) Parameter Symbol Conditions Output Voltage VO 0<IOUT<1.5A, 3.3V<VIN<7V, T= 25 °C 0<IOUT<1.5A, 3.3V<VIN<7V, Over Temp. 0<IOUT<1.5A, 4.0V<VIN<7V, T= 25 °C 0<IOUT<1.5A, 4.0V<VIN<7V, Over Temp. 0<IOUT<1.5A, 4.5V<VIN<7V, T= 25 °C 0<IOUT<1.5A, 4.5V<VIN<7V, Over Temp. 0<IOUT<1.5A, 4.8V<VIN<7V, T= 25 °C 0<IOUT<1.5A, 4.8V<VIN<7V, Over Temp. 0<IOUT<1.5A, 6.5V<VIN<7V, T= 25 °C 0<IOUT<1.5A, 6.5V<VIN<7V, Over Temp. VIN<7V, 1.5V<VIN<5.75, 10mA<Iout<5Amp MIN TYP MAX UNIT 1.485 1.475 2.475 2.460 2.970 2.950 3.267 3.247 4.950 4.920 1.238 1.230 1.5 V Reference Voltage Vref Line Regulation (1) REG (line) IO = 10mA, VIN =5V, T= 25 °C 0.04 1.515 1.525 2.525 2.540 3.030 3.050 3.333 3.353 5.050 5.080 1.262 1.270 0.2 Load Regulation (1) REG (LOAD) IO = 10mA, VIN =5V, T= 25 °C 0.08 0.40 T= 25 °C Over Temperature 1.0 1.1 5.0 2.3 6 0.5 0.003 80 3.0 60 3.0 60 Dropout Voltage VD Minimum load Current Current Limit Ground Pin Current Temperature Stability Thermal Regulation Ripple Rejection Thermal Resistance Imin IS IQ TS RA - (Vin-Vout)=3V VIN =5V IO = 10mA, VIN =5V T= 25 °C, 30ms pulse T= 25 °C, VIN =5V TO-220 Junction to Tab Junction to Ambient DD Package Junction to Tab Junction to Ambient 1.5 60 2.5 3.0 3.3 5.0 1.250 V % V 1.3 10 10 3.0 60 3.0 60 mA A mA % %/W dB °C/W Note: Output Switch tests are performed under pulsed conditions to minimize power dissipation Bay Linear, Inc 2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 989-7144, Fax: (925) 940-9556 www.baylinear.com Advance Information- These data sheets contain descriptions of products that are in development. The specifications are based on the engineering calculations, computer simulations and/ or initial prototype evaluation. Preliminary Information- These data sheets contain minimum and maximum specifications that are based on the initial device characterizations. These limits are subject to change upon the completion of the full characterization over the specified temperature and supply voltage ranges. The application circuit examples are only to explain the representative applications of the devices and are not intended to guarantee any circuit design or permit any industrial property right to other rights to execute. Bay Linear takes no responsibility for any problems related to any industrial property right resulting from the use of the contents shown in the data book. Typical parameters can and do vary in different applications. Customer’s technical experts must validate all operating parameters including “ Typical” for each customer application. LIFE SUPPORT AND NUCLEAR POLICY Bay Linear products are not authorized for and should not be used within life support systems which are intended for surgical implants into the body to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent of Bay Linear President. Bay Linear, Inc 2478 Armstrong Street, Livermore, CA 94550 Tel: (925) 989-7144, Fax: (925) 940-9556 www.baylinear.com