E-Series Surface Mount Mixer 1 - 500 MHz ESCM-1 V3.00 Features ● ● ● SM-3 LO Power: +7 dBm Up to +1 dBm RF Surface Mount Specifications @ 25°C Frequency Range RF LO IF 1 - 500 MHz 1 - 500 MHz DC - 500 MHz Conversion Loss (dB) 2 - 250 MHz 1 - 500 MHz Typical 6.0 6.5 Maximum 7.0 8.0 Isolation (dB) LO to RF 1 - 10 MHz 10 - 250 MHz 250 - 500 MHz LO to IF 1 - 10 MHz 10 - 250 MHz 250 - 500 MHz Typical Minimum 60 45 40 40 35 30 55 45 40 40 35 25 SM-26 Operating Characteristics Impedance 50 Ohms Nominal RF input for 1dB Compression +1 dBm Ordering Information Part No. ESCM-1 ESCM-1/SM-3 ESCM-1/SM-3TR Packaging SM-26 in Tubes SM-3 in Tubes SM-3 Forward Tape & Reel Absolute Maximum Ratings Parameter RF Power Peak IF Current Storage Temperature Operating Temperature Pin Temperature (10 Seconds) Absolute Maximum 50 mW 40 mA -55°C to 100°C -55°C to 100°C 260°C Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Pin Configuration Function LO RF IF* Ground Pin No. 8 1 3,4 2,5,6,7 * IF pins must be connected together externally. S 0140 D Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020