E-Series Surface Mount Mixer 3415 - 3500 MHz ESMD-3500DC V3.00 Features ● ● ● SM-2 LO Power: +7 dBm Up to +7 dBm RF Surface Mount Specifications @ 25°C Frequency Range RF LO IF 3415 - 3500 MHz 2470 - 2595 MHz 880 - 970 MHz Conversion Loss (dB) 3415 - 3500 MHz Maximum 10 Isolation (dB) LO to RF 2470 - 2595 MHz LO to IF 2470 - 2595 MHz Typical VSWR LO RF IF Typical 2.4:1 2.4:1 1.3 :1 Minimum 23 15 18 12 Maximum 2.7:1 2.7:1 1.8:1 VSWR Test Conditions: RF LO IF 3415 - 3500 MHz 2470 - 2595 MHz 880 - 970 MHz Two Tone Third Order Input Intercept (dBm) Test Condition 1 RF1: 3415 MHz @ -10 dBm RF2: 3416 MHz @ -10 dBm LO: 2475 MHz @ +7 dBm +5 dBm Typical Pin Configuration Function LO RF IF Ground Test Condition 2 RF1: 3500 MHz @ -10 dBm RF2: 3501 MHz @ -10 dBm LO: 2560 MHz @ +7 dBm Pin No. 2 1 3 4,5 Absolute Maximum Ratings Operating Characteristics Impedance 50 Ohms Nominal RF input for 1dB Compression + 7 dBm Ordering Information Part No. ESMD-3500DC ESMD-3500DCTR Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) Packaging Tube Forward Tape & Reel Parameter RF Power Peak IF Current Storage Temperature Operating Temperature Pin Temperature (10 Seconds) Absolute Maximum 50 mW 40 mA -55°C to 100°C -55°C to 100°C 260°C S 0623 E Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020