### ETC FWA-700A

```Bussmann
®
70-1000A
FWA 150V
Rated
Current
RMS-Amps
Type
®
Electrical Characteristics
I2t (A2 Sec)
Clearing
Pre-arc
at 150V
Ordering Information
Watts
Loss
Part
Number
Dimensions
Carton
Qty.
Carton
Weight
(lbs)
Figure
Number
1
0.18
Fig. 1
70
470
4000
6.9
FWA-70B
_____________________________________________________________________________________
80
670
6000
7.7
FWA-80B
____________________________________________________________________________________
__
100
1200
12000
9.0
FWA-100B __
____________________________________________________________________________________
125
1870
18000
11.2
FWA-125B
_____________________________________________________________________________________
150
2700
26000
13.5
FWA-150B
_____________________________________________________________________________________
200
4780
45000
17.6
FWA-200B
_____________________________________________________________________________________
250
7470
70000
22.5
FWA-250B
_____________________________________________________________________________________
FWA _______________________________________________________________________________
300
10760
100000
27.0
FWA-300B_____
150V
350
15700
140000
30.6
FWA-350B
_____________________________________________________________________________________
400
20300
180000
35.2
FWA-400B
__________________________________________________________________________________________________________________________
500
39000
120000
35.0
FWA-500A
_____________________________________________________________________________________
600
46000
140000
47.0
FWA-600A
_____________________________________________________________________________________
700
75000
220000
49.0
FWA-700A
_____________________________________________________________________________________
5
2.42
Fig. 2
800
92000
280000
58.0
FWA-800A
_____________________________________________________________________________________
1000
n
n
n
n
170000
510000
60.0
FWA-1000A
Interrupting rating 100kA RMS Symmetrical for ampere ratings 70-400.
Interrupt rating 200kA RMS Symmetrical for ampere ratings 450-1000.
Watts loss provided at rated current.
150 Vdc U.L. Recognition on 70 through 800 amperes only. Consult Bussmann for additional ratings.
1 kg = 2.2 lbs
1 lb = 0.45 kg
Electrical Characteristics
Total Clearing I2t
The total clearing I2t at rated voltage and
at power factor of 15% are given in the
electrical characteristics. For other voltages, the clearing I2t is found by multiplying by correction factor, K , given as
a function of applied working voltage,
E g , (RMS).
Power Losses
Watts loss at rated current is given in
the electrical characteristics. The curve
allows the calculation of the power
losses at load currents lower than the
rated current . The correction factor, K p ,
is given as a function of the RMS load
current, Ib , in % of the rated current .
Arc Voltage
This curve gives the peak arc voltage,
U L , which may appear across the fuse
during its operation as a function of the
applied working voltage, E g , (RMS) at a
power factor of 15%.
1.5
K
1.0
Kp
0.8
UL
1.0
0.6
0.5
300
0.4
0.5
1)
200
2)
100
0.3
0.2
0.3
0.2
0.15
22
Eg
Eg
70
102
150
Ib
0.1
50
100
150
30 40 50
60
70
80 90 100%
1) 500-1000 Amp Range
2) 70-400 Amp Range
1-17-01
SB00233
Form No. FWA 150
Page 1 of 2
BIF Doc #720002
Bussmann
®
FWA 150V
70-1000A
Dimensions
Fig. 1: 70-400 Amp Range
2.656
2.188
1.936
1.156
0.125
0.750 0.312
1.000
0.438
Fig. 2: 500-1000 Amp Range
3.500
2.438
1.250
1.000
0.250
1.500
0.406
Dimension in inches.
1mm = 0.0394∑
1∑ = 25.4mm
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled.
This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right,
without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without
notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
1-17-01
SB00233
Form No. FWA 150
Page 2 of 2
BIF Doc #720002
```