05084 PSMDA05C-8 thru PSMDA24C-8 . . . engineered solutions for the transient environment™ BIDIRECTIONAL MONOLITHIC TVS DIODE ARRAY APPLICATIONS ✔ Multiple I/O Port Protection ✔ Board Level Interface Connection ✔ RS-232, RS-422 & RS-423 ✔ Portable Electronics IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) SO-14 FEATURES ✔ 450 Watts Peak Pulse Power per Line (tp = 8/20 µs) ✔ ESD Protection > 40 kilovolts ✔ 8 Bidirectional Lines (Monolithic Design) ✔ Designed for I/O Protection ✔ Available in 4 Voltage Types Ranging from 5.0V to 24V MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-14 Package ✔ Weight 0.15 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Device Marking: Marking Code & Logo ✔ Pin 1 Indicated By DOT on Top of Package CIRCUIT DIAGRAM 05084.R1 5/02 1 14 2 13 3 12 4 11 5 10 6 9 7 8 1 www.protekdevices.com PSMDA05C-8 thru PSMDA24C-8 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 450 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) PSMDA05C-8 PSMDA12C-8 PSMDA15C-8 PSMDA24C-8 05084.R1 5/02 DEVICE MARKING CODE SEB SED SEF SEH RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 5.0 12.0 15.0 24.0 6.0 13.4 16.7 26.7 9.8 19.0 24.0 40.0 2 MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE @8/20µs VC @ IPP @VWM ID µA 0V @ 1 MHz C pF 15.4V @ 30A 26.4V @ 17A 32.4V @ 14A 45.0V @ 10A 100 1 1 1 350 150 120 100 www.protekdevices.com PSMDA05C-8 thru PSMDA24C-8 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 450W, 8/20µs Waveform 1,000 100 10 0.01 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t 20 IPP/2 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05084.R1 5/02 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com PSMDA05C-8 thru PSMDA24C-8 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-14 -A- 14 8 -B- 1 P M B M 0.010” (0.25 MM) 7 PL 7 PACKAGE DIMENSIONS DIM DG C R X 45º 0º - 10º -TK 0.010” (0.25 MM) M T B S F J A S 8 PL MOUNTING PAD 8.55 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 0.386 10.00 0.393 0.150 4.00 0.157 0.054 1.75 0.068 0.014 0.49 0.019 0.016 1.25 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.008 0.25 0.009 0.004 0.25 0.009 0.229 6.20 0.244 0.010 0.50 0.019 NOTES: 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusions. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.050” TYP 0.030” ± 0.005” 0.160” ± 0.005” A B C D F G J K P R MILLIMETERS MIN MAX 0.245” MIN 0.045” ± 0.005” 06006 Rev 1 - 11/01 PART NUMBER SUFFIXES USED FOR TAPE & REEL/BULK ORDERING: Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T7 = 7 Inch Reel - 1,000 pieces per reel i.e.: PSMDA05C-8-T7 Suffix-T13 = 13 Inch Reel - 2,500 pieces per reel i.e: PSMDA05C-8-T13 No Suffix = Product Shipped in Tubes of 55 pcs per Tube ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2001 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05084.R1 5/02 4 www.protekdevices.com