Inductive proximity sensors Cylindrical type, Ø 4 mm plain or M5 x 0.5 threaded Metal case (stainless steel), short d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded or plain section a = 29 b = 29 a = 41 b = 24 Nominal sensing distance (Sn) 0.8 mm 0.8 mm References 3-wire a PNP NO XS1-L04PA311 XS1-L04PA311S NPN NO XS1-L04NA311 XS1-L04NA311S 0.025 0.010 Connection Pre-cabled, 3 x 0.11 mm2, length 2 m (1) Degree of protection IP 67 Connector (types 1 to 8) (2) Depending on connector (see pages 3/58 and 3/59) Operating temperature - 25…+ 70 °C Output state indication LED, side mounted Voltage limits (including ripple) a 5…30 V Switching capacity 0…100 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 5000 Hz Weight (kg) 3 Characteristics Wiring schemes 3-wire a, NO output BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) – (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-L04PA311 with 5 m cable becomes XS1-L04PA311L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/20 Te Weight increase 0.030 kg 0.080 kg aa = = 29 45 bb = = 24 24 a = 33 b = 27 c=3 a = 41 b = 24 a = 42 b = 31 c=3 0.8 mm 0.8 mm XS1-N05PA311 XS1-N05PA311S XS1-N05NA311 XS1-N05NA311S 0.030 0.015 a = 45 b = 21 c=3 3 Pre-cabled, 3 x 0.11 mm2, length 2 m (1) Connector (types 1 to 8) (2) IP 67 Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C LED, side mounted a 5…30 V 0…100 mA with overload and short-circuit protection ≤2V ≤ 10 mA 5000 Hz Te 3/21 Inductive proximity sensors Cylindrical type, Ø 6.5 mm plain Metal case (brass or stainless steel), short d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Plain section c = For non flush mounting sensors a = 33 (XS1-L06iC410 : a = 50) b = 30 (XS1-L06iC410 : b = 47) Stainless steel case Nominal sensing distance (Sn) a = 42 b = 34 1.5 mm Brass case Stainless steel case Increased range model 2.5 mm 1.5 mm Brass case Increased range model 2.5 mm References 3-wire a 3 4-wire a (complementary outputs) PNP NO XS1-L06PA340 XS1-L06PA349 XS1-L06PA340S XS1-L06PA349S NPN NO XS1-L06NA340 XS1-L06NA349 XS1-L06NA340S XS1-L06NA349S PNP NO + NC XS1-L06PC410 – – – NPN NO + NC XS1-L06NC410 – – – 0.025 0.025 0.010 0.010 Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.11 mm2 or 4 x 0.08 mm2, L = 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 70 °C Output state indication LED, annular Voltage limits (including ripple) a 10…38 V (c 24 V rectified and filtered) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V ≤ 2.6 V ≤2V ≤ 2.6 V Current consumption, no-load ≤ 10 mA ≤ 10 mA ≤ 10 mA ≤ 10 mA Maximum switching frequency 5000 Hz 350 Hz 5000 Hz 350 Hz - 25…+ 50 °C Connector (types 1 to 8) (2) Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C - 25…+ 50 °C LED, 4 viewing ports at 90° Wiring schemes 3-wire a, NO output XS1/XS2-L06ii340/340S/340D/349/349S/349D BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 4-wire a, NO + NC output XS1-L06ii410 + BK/4 (NO) BK/2 (NC) – BN/1 PNP BU/3 BK/4 (NO) WH/2 (NC) + – i -L06i ii i S sensors, NO or NC output on terminal 4 Note : for XSi i34i (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-L06PA340 with 5 m cable becomes XS1-L06PA340L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/22 Te BN/1 NPN + BK/4 (NO) WH/2 (NC) BU/3 Weight increase 0.030 kg 0.080 kg – Non flush mountable in metal aa = = 45 45 bb = = 24 24 Stainless steel case a a= = 33 33 b b= = 27 27 cc = 3 =3 Stainless steel case a a= = 42 42 b b= = 31 31 cc = 3 =3 Stainless steel case a a= = 45 45 b b= = 21 21 cc = 3 =3 Stainless steel case 2.5 mm 2.5 mm 2.5 mm 1.5 mm Brass case Increased range model 2.5 mm XS1-L06PA340D XS1-L06PA349D XS2-L06PA340 XS2-L06PA340S XS2-L06PA340D XS1-L06NA340D XS1-L06NA349D XS2-L06NA340 XS2-L06NA340S XS2-L06NA340D – – – – – – – – – – 0.015 0.015 0.025 0.010 0.015 Connector Connector Pre-cabled, 3 x 0.11 or (types 9, 10, 11/12, 15, 16) (2) (types 9, 10, 11, 12, 15, 16) (2) 4 x 0.08 mm2, L = 2 m (1) Connector (types 1 to 8) (2) Connector (types 9, 10, 11/12, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) IP 67 Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C - 25…+ 70 °C - 25…+ 50 °C LED, 4 viewing ports at 90° LED, annular 3 LED, 4 viewing ports at 90° a 10…38 V (c 24 V rectified and filtered) 0…200 mA with overload and short-circuit protection ≤2V ≤ 2.6 V ≤2V ≤ 10 mA ≤ 10 mA ≤ 10 mA 5000 Hz 350 Hz 5000 Hz Te 3/23 Inductive proximity sensors Cylindrical type, M8 x 1 threaded Metal case (brass), short d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 33 b = 26 Nominal sensing distance (Sn) 1.5 mm Increased range model 2.5 mm 1.5 mm Increased range model 2.5 mm a = 42 b = 26 References 3-wire a PNP NO XS1-N08PA340 XS1-N08PA349 XS1-N08PA340S XS1-N08PA349S NPN NO XS1-N08NA340 XS1-N08NA349 XS1-N08NA340S XS1-N08NA349S 0.035 0.035 0.015 0.015 Weight (kg) 3 Characteristics Connection Pre-cabled, 3 x 0.11 mm2 or 4 x 0.08 mm2, L = 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 70 °C Output state indication LED, annular Voltage limits (including ripple) a 10…38 V (c 24 V rectified and filtered) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V ≤ 2.6 V ≤2V ≤ 2.6 V Current consumption, no-load ≤ 10 mA ≤ 10 mA ≤ 10 mA ≤ 10 mA Maximum switching frequency 5000 Hz 350 Hz 5000 Hz 350 Hz - 25…+ 50 °C Connector (types 1 to 8) (2) Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C - 25…+ 50 °C LED, 4 viewing ports at 90° Wiring schemes 3-wire a, NO output XS1/XS2-N08ii340/340S/340D/349/349S/349D BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) – Note : for XSi-N08ii34iS sensors, NO output on terminal 4 (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-N08PA340 with 5 m cable becomes XS1-N08PA340L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/24 Te Weight increase 0.030 kg 0.080 kg Non flush mountable in metal a = 45 b = 24 a = 33 b = 22 c=4 a = 42 b = 23 c=4 a = 45 b = 20 c=4 1.5 mm Increased range model 2.5 mm 2.5 mm 2.5 mm 2.5 mm XS1-N08PA340D XS1-N08PA349D XS2-N08PA340 XS2-N08PA340S XS2-N08PA340D XS1-N08NA340D XS1-N08NA349D XS2-N08NA340 XS2-N08NA340S XS2-N08NA340D 0.020 0.020 0.035 0.015 0.020 Connector Connector Pre-cabled, 3 x 0.11 or (types 9, 10, 11/12, 15, 16) (2) (types 9, 10, 11/12, 15, 16) (2) 4 x 0.08 mm2, L = 2 m (1) Connector (types 1 to 8) (2) Connector (types 9, 10, 11/12, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) IP 67 Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C - 25…+ 70 °C 3 - 25…+ 50 °C LED, 4 viewing ports at 90° LED, annular LED, 4 viewing ports at 90° a 10…38 V (c 24 V rectified and filtered) 0…200 mA with overload and short-circuit protection ≤2V ≤ 2.6 V ≤2V ≤ 10 mA ≤ 10 mA ≤ 10 mA 5000 Hz 350 Hz 800 Hz Te 3/25 Inductive proximity sensors Cylindrical type, M8 x 1 threaded Metal case (stainless steel), form A d.c. supply References, characteristics, dimensions, schemes Accessories: page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 50 b = 40 a = 61 b = 40 Nominal sensing distance (Sn) 1.5 mm 1.5 mm References 3-wire a 3 PNP NO XS1-M08PA370 – XS1-M08PA370D – NC XS1-M08PB370 – XS1-M08PB370D – NPN NO 2-wire a (non polarised) Supply to : Terminals 3-4 NO 4-wire a (complementary outputs) PNP NO + NC XS1-M08NA370 – XS1-M08NA370D – – – – – – XS1-M08PC410 – XS1-M08PC410D Weight (kg) 0.035 0.035 0.025 0.025 Characteristics Connection Pre-cabled, 3 x 0.11 mm2, length 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 80 °C Output state indication LED annular Voltage limits (including ripple) a 10…58 V Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 5000 Hz Connector (types 9, 10, 11/12, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) LED, 4 viewing ports at 90° a 10…38 V a 10…58 V a 10…38 V Wiring schemes 3-wire a, NO or NC output XS1-M08ii370/370D BN/1 PNP BU/3 + BN/1 BK/4 (NO) NPN BK/2 (NC) – BU/3 2-wire a non polarised, NO output XS1-M08Di210/210D/210LD + BK/4 (NO) BK/2 (NC) – BN/3 BN/1 +/– BU/4 –/+ NO BN/1 NC BU/2 4-wire a, NO + NC output XS1-M08ii410/410D +/– –/+ BN/1 PNP BK/4 (NO) WH/2 (NC) BU/3 (1) Sensors pre-cabled with other cable lengths: Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example: sensor XS1-M08PA370 with 5 m cable becomes XS1-M08PA370L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/26 Te + – BN/1 NPN BU/3 + BK/4 (NO) WH/2 (NC) – Weight increase 0.030 kg 0.080 kg a = 50 b = 40 a = 61 b = 40 a = 50 b = 40 Length of cable: 0.8 m 1.5 mm 1.5 mm 1.5 mm – – – – – – – – – XS1-M08DA210 XS1-M08DA210D XS1-M08DA210LD – – – 0.035 0.025 0.040 Pre-cabled, 2 x 0.11 mm2, length 2 m (1) Connector (types 9, 10, 15, 16) (2) Connector (types 9, 10, 15, 16) or splitter boxes (2) IP 67 Dpg. on connector (see pages 3/58 and 3/59) 3 - 25…+ 80 °C LED, annular LED, 4 viewing ports at 90° LED, annular a 10…58 V 1,5…100 mA with overload and short-circuit protection ≤ 5.2 V – 800 Hz Te 3/27 Inductive proximity sensors Cylindrical type, M8 x 1 threaded Metal case (stainless steel), form A a.c. or d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 50 b = 40 Nominal sensing distance (Sn) 1.5 mm References 2-wire c or a NO XS1-M08MA230 NC XS1-M08MB230 Weight (kg) 3 0.035 Characteristics Connection Pre-cabled, 2 x 0.11 mm2, length 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) c or a 20…264 V Switching capacity 5…100 mA (2) Voltage drop, closed state ≤ 5.5 V Current consumption, no-load – Maximum switching frequency (c) 25 Hz or (a) 650 Hz Wiring schemes 2-wire c or a, NO or NC output BN/2 BU/3 For connector version sensors (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors Weight increase 5m L1 0.030 kg 10 m L2 0.080 kg Example : sensor XS1-M08MA230 with 5 m cable becomes XS1-M08MA230L1 (2) These sensors do not incorporate overload or short-circuit protection and therefore, it is recommended that a 0.8 A “quick-blow” fuse be connected in series with the load. 3/28 Te Non flush mountable in metal aa = = 50 45 bb = = 36 24 c=4 a = 33 b = 27 c=3 a = 42 b = 31 c=3 a = 45 b = 21 c=3 2.5 mm XS2-M08MA230 XS2-M08MB230 0.035 3 Pre-cabled, 2 x 0.11 mm2, length 2 m (1) IP 67 - 25…+ 80 °C LED, annular c or a 20…264 V 5…100 mA (2) ≤ 5.5 V – (c) 25 Hz or (a) 400 Hz Te 3/29 Inductive proximity sensors Cylindrical type, M12 x 1 threaded Metal case (brass), short d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 33 b = 26 a = 45 b = 25 Nominal sensing distance (Sn) 2 mm Increased range model 4 mm 2 mm Increased range model 4 mm References 3-wire a 3 PNP NO XS1-N12PA340 XS1-N12PA349 XS1-N12PA340D XS1-N12PA349D NPN 4-wire a (complementary outputs) PNP NO XS1-N12NA340 XS1-N12NA349 XS1-N12NA340D XS1-N12NA349D NO + NC XS1-N12PC410 – XS1-N12PC410D – 0.070 0.070 0.020 0.020 Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2 or 4 x 0.22 mm2, length 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 70 °C Output state indication LED, annular Voltage limits (including ripple) a 10…38 V (c 24 V rectified and filtered) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 5000 Hz - 25…+ 50 °C Connector Connector (types 9, (types 9, 10, 15, 16) (2) 10, 11, 12, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C - 25…+ 50 °C LED, 4 viewing ports at 90° ≤ 2.6 V ≤2V ≤ 2.6 V 300 Hz 5000 Hz 300 Hz Wiring schemes 3-wire a, NO output XS1/XS2-N12ii340/340D/349/349D BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – 4-wire a, NO + NC output XS1-N12ii410/410D BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 PNP BK/4 (NO) WH/2 (NC) BU/3 (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-N12PA340 with 5 m cable becomes XS1-N12PA340L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/30 Te + – BN/1 NPN + BK/4 (NO) WH/2 (NC) BU/3 Weight increase 0.090 kg 0.240 kg – Non flush mountable in metal a = 33 b = 21 c=5 a = 45 b = 20 c=5 4 mm 4 mm XS2-N12PA340 XS2-N12PA340D XS2-N12NA340 XS2-N12NA340D – – 0.070 0.020 Pre-cabled, 3 x 0.34 mm2 or 4 x 0.22 mm2, length 2 m (1) Connector (types 9, 10, 15, 16) (2) IP 67 Depending on connector (see pages 3/58 and 3/59) 3 - 25…+ 70 °C LED, annular LED, 4 viewing ports at 90° a 10…38 V (c 24 V rectified and filtered) 0…200 mA with overload and short-circuit protection ≤2V ≤ 10 mA 5000 Hz Te 3/31 Inductive proximity sensors Cylindrical type, M12 x 1 threaded Metal case (brass), form A d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 50 b = 42 Nominal sensing distance (Sn) 2 mm 2 mm 2 mm 2 mm a = 61 b = 40 References 3-wire a 3 4-wire a universal model PNP NO XS1-M12PA370 – XS1-M12PA370D – NPN NO XS1-M12NA370 – XS1-M12NA370D – – XS1-M12KP340 – XS1-M12KP340D 0.075 0.075 0.025 0.025 PNP/NPN NO/NC programmable Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V (3) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 5000 Hz Depending on connector (see pages 3/58 and 3/59) LED, 4 viewing ports at 90° a 10…38 V (4) ≤ 2.6 V a 10…58 V (3) ≤2V a 10…38 V (4) ≤ 2.6 V Wiring schemes 3-wire a, NO output XS1/XS2-M12ii370/370D 4-wire a programmable, NO or NC output XS1/XS2-M12KP340/340D BN/1 (NO), BU/3 (NC) BN/1 (NO), BU/3 (NC) BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) PNP WH/2 NPN BK/4 – – BU/3 (NO), BN/1 (NC) (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-M12PA370 with 5 m cable becomes XS1-M12PA370L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. (3) Can be supplied with rectified c 24 V. (4) c 24 V rectified and filtered. 3/32 Te + + WH/2 BK/4 BU/3 (NO), BN/1 (NC) Weight increase 0.090 kg 0.240 kg – Non flush mountable in metal a = 50 b = 37 c=5 a = 61 b = 35 c=5 4 mm 4 mm 4 mm 4 mm XS2-M12PA370 – XS2-M12PA370D – XS2-M12NA370 – XS2-M12NA370D – XS2-M12KP340 – XS2-M12KP340D 0.075 0.075 0.025 0.075 Pre-cabled, 3 x 0.34 mm2, length 2 m (1) Connector (types 9, 10, 15, 16) (2) IP 68 Depending on connector (see pages 3/58 and 3/59) 3 - 25…+ 80 °C LED, annular a 10…58 V (3) LED, 4 viewing ports at 90° a 10…38 V (4) a 10…58 V (3) a 10…38 V (4) ≤2V ≤ 2.6 V 0…200 mA with overload and short-circuit protection ≤2V ≤ 2.6 V ≤ 10 mA 5000 Hz Te 3/33 Inductive proximity sensors Cylindrical type, M12 x 1 threaded Metal case (brass), form A d.c. supply (continued) References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 50 b = 42 a = 61 b = 40 Nominal sensing distance (Sn) 2 mm 2 mm References 2-wire a (non polarised) Supply to : Terminals 3-4 NO XS1-M12DA210 XS1-M12DA210D Terminals 1-2 NC XS1-M12DB210 XS1-M12DB210D 0.075 0.025 Connection Pre-cabled, 2 x 0.34 mm2, length 2 m (1) Connector (types 9, 10, 15, 16) (2) Degree of protection IP 68 Depending on connector (see pages 3/58 and 3/59) Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V Switching capacity 1.5…100 mA with overload and short-circuit protection Voltage drop, closed state ≤ 5.2 V Current consumption, no-load – Maximum switching frequency 800 Hz Weight (kg) 3 Characteristics LED, 4 viewing ports at 90° Wiring schemes 2-wire a non polarised, NO or NC output XS1-M12DA210/DA210D BN/3 BN/1 +/– BU/4 –/+ NO XS1-M12DB210/210D/210LD BN/1 +/– BU/2 –/+ NC (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-M12DA210 with 5 m cable becomes XS1-M12DA210L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/34 Te Weight increase 0.090 kg 0.240 kg Inductive proximity sensors Cylindrical type, M12 x 1 threaded Metal case (brass), form A a.c. or d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b Non flush mountable in metal c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors AC/DC a = 50 b = 37 c=5 AC/DC 2 mm 4 mm NO XS1-M12MA230 XS2-M12MA230 NC XS1-M12MB230 XS2-M12MB230 NO XS1-M12MA250 XS2-M12MA250 NC XS1-M12MB250 XS2-M12MB250 0.075 0.075 Nominal sensing distance (Sn) a = 50 b = 42 References 2-wire c or a 2-wire c or a (protected against short-circuits) Weight (kg) 3 Characteristics Connection Pre-cabled, 2 x 0.34 mm2, L = 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) c or a 20…264 V Switching capacity 5…200 mA (3) Voltage drop, closed state ≤ 5.5 V Current consumption, no-load – Maximum switching frequency (c) 25 Hz or (a) 350 Hz Wiring schemes 2-wire c or a, NO or NC output XS1/XS2-M12ii230/250 BN/2 BU/3 For connector version sensors (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors Weight increase 5m L1 0.075 kg 10 m L2 0.200 kg Example : sensor XS1-M12MA230 with 5 m cable becomes XS1-M12MA230L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. (3) For the sensors not incorporating overload or short-circuit protection, it is recommended that a 0.8 A “quick-blow” fuse be connected in series with the load. Te 3/35 Inductive proximity sensors Cylindrical type, M18 x 1 threaded Metal case (brass), short d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 33.5 b = 26 Nominal sensing distance (Sn) 5 mm Increased range model 10 mm 5 mm Increased range model 10 mm a = 45 b = 26 References 3-wire a 3 4-wire a (complementary outputs) PNP NO XS1-N18PA340 XS1-N18PA349 XS1-N18PA340D XS1-N18PA349D NPN NO XS1-N18NA340 XS1-N18NA349 XS1-N18NA340D XS1-N18NA349D PNP NO + NC XS1-N18PC410 – XS1-N18PC410D – NPN NO + NC XS1-N18NC410 – XS1-N18NC410D – 0.100 0.100 0.040 0.040 Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2 or 4 x 0.34 mm2, length 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 70 °C Output state indication LED, annular Voltage limits (including ripple) a 10…38 V (c 24 V rectified and filtered) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 2000 Hz - 25…+ 50 °C Connector Connector (types 9, (types 9, 10, 15, 16) (2) 10, 11, 12, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C - 25…+ 50 °C LED, 4 viewing ports at 90° ≤ 2.6 V ≤2V ≤ 2.6 V 60 Hz 2000 Hz 60 Hz Wiring schemes 3-wire a, NO output XS1/XS2-N18ii340/340D/349/349D BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – 4-wire a, NO + NC output XS1/XS2-N18ii410/410D BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 PNP BK/4 (NO) WH/2 (NC) BU/3 (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-N18PA340 with 5 m cable becomes XS1-N18PA340L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/36 Te + – BN/1 NPN + BK/4 (NO) WH/2 (NC) BU/3 Weight increase 0.120 kg 0.320 kg – Non flush mountable in metal a = 33.5 b = 18 c=8 a = 45 b = 18 c=8 8 mm 8 mm XS2-N18PA340 XS2-N18PA340D XS2-N18NA340 XS2-N18NA340D – – – – 0.100 0.030 Pre-cabled, 3 x 0.34 mm2 or 4 x 0.34 mm2, length 2 m (1) Connector (types 9, 10, 15, 16) (2) IP 67 Depending on connector (see pages 3/58 and 3/59) 3 - 25…+ 70 °C LED, annular LED, 4 viewing ports at 90° a 10…38 V (c 24 V rectified and filtered) 0…200 mA with overload and short-circuit protection ≤2V ≤ 10 mA 2000 Hz Te 3/37 Inductive proximity sensors Cylindrical type, M18 x 1 threaded Metal case (brass), form A d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 60 b = 51.5 Nominal sensing distance (Sn) 5 mm 5 mm 5 mm 5 mm a = 70 b = 51.5 References 3-wire a 3 4-wire a universal model PNP NO XS1-M18PA370 – XS1-M18PA370D – NPN NO XS1-M18NA370 – XS1-M18NA370D – – XS1-M18KP340 – XS1-M18KP340D 0.120 0.120 0.060 0.060 PNP/NPN NO/NC programmable Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V (3) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 2000 Hz Connector (types 9, 10, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) LED, 4 viewing ports at 90° a 10…38 V (4) a 10…58 V (3) ≤ 2.6 V ≤2V a 10…38 V (4) ≤ 2.6 V Wiring schemes 3-wire a, NO output XS1-M18ii370/370D 4-wire a programmable, NO or NC output XS1-M18KP340/340D BN/1 (NO), BU/3 (NC) BN/1 (NO), BU/3 (NC) BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) PNP WH/2 + BK/4 – – BU/3 (NO), BN/1 (NC) (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-M18PA370 with 5 m cable becomes XS1-M18PA370L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. (3) Can be supplied with rectified c 24 V. (4) c 24 V rectified and filtered. 3/38 Te + NPN WH/2 BK/4 BU/3 (NO), BN/1 (NC) Weight increase 0.120 kg 0.320 kg – Inductive proximity sensors Cylindrical type, M18 x 1 threaded Metal case (brass), form A d.c. supply (continued) References, characteristics, dimensions, schemes Accessories : page 3/59 Non flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 60 b = 43.5 c=8 Nominal sensing distance (Sn) 8 mm 8 mm References 3-wire a 4-wire a universal model PNP NO XS2-M18PA370 – NPN NO XS2-M18NA370 – – XS2-M18KP340 0.120 0.120 PNP/NPN NO/NC programmable Weight (kg) 3 Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V (2) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 2000 Hz a 10…38 V (3) ≤ 2.6 V Wiring schemes 3-wire a, NO output XS2-M18ii370 4-wire a programmable, NO or NC output XS2-M18KP340 BN/1 (NO), BU/3 (NC) BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) PNP WH/2 BN/1 (NO), BU/3 (NC) + – – BU/3 (NO), BN/1 (NC) (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS2-M18PA370 with 5 m cable becomes XS2-M18PA370L1 (2) Can be supplied with rectified c 24 V. (3) c 24 V rectified and filtered. + NPN BK/4 WH/2 BK/4 – BU/3 (NO), BN/1 (NC) Weight increase 0.120 kg 0.320 kg Te 3/39 Inductive proximity sensors Cylindrical type, M18 x 1 threaded Metal case (brass), form A d.c. supply (continued) References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 50 b = 42 a = 60 b = 42 Nominal sensing distance (Sn) 5 mm 5 mm References 2-wire a (non polarised) Supply to : Terminals 3-4 NO XS1-M18DA210 XS1-M18DA210D Terminals 1-2 NC XS1-M18DB210 – 0.120 0.060 Connection Pre-cabled, 2 x 0.5 mm2, length 2 m (1) Degree of protection IP 68 Connector (types 9, 10, 15, 16) (2) Depending. on connector (see pages 3/58 and 3/59) Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V Switching capacity 1.5…100 mA with overload and short-circuit protection Voltage drop, closed state ≤ 5.2 V Current consumption, no-load – Maximum switching frequency 350 Hz Weight (kg) 3 Characteristics LED, 4 viewing ports at 90° Wiring schemes 2-wire a, non polarised, NO or NC output XS1-M18DA210/DA210D BN/3 BN/1 +/– BU/4 –/+ XS1-M18DB210 BN/1 +/– BU/2 –/+ NC NO (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-M18DA210 with 5 m cable becomes XS1-M18DA210L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/40 Te Weight increase 0.120 kg 0.320 kg Inductive proximity sensors Cylindrical type, M18 x 1 threaded Metal case (brass), form A a.c. or d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 60 b = 51.5 AC/DC Nominal sensing distance (Sn) 5 mm References 2-wire c or a 2-wire c or a (protected against short-circuits) NO XS1-M18MA230 NC XS1-M18MB230 NO XS1-M18MA250 NC XS1-M18MB250 Weight (kg) 3 0.120 Characteristics Connection Pre-cabled, 2 x 0.5 mm 2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication non protected model LED, annular protected model 1 red LED (output state), 1 green LED (supply and short-circuit indication) Voltage limits (including ripple) c or a 20…264 V Switching capacity (c) 5…300 mA or (a) 5…200 mA (2) Voltage drop, closed state ≤ 5.5 V Current consumption, no-load – Maximum switching frequency (c) 25 Hz or (a) 200 Hz Wiring schemes 2-wire c or a, NO or NC output XS1-M18Mi230/250 BN/2 BU/3 For connector version sensors (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors Weight increase 5m L1 0.120 kg 10 m L2 0.320 kg Example : sensor XS1-M18MA230 with 5 m cable becomes XS1-M18MA230L1 (2) For the sensors not incorporating overload or short-circuit protection, it is recommended that a 0.8 A “quick-blow” fuse be connected in series with the load. Te 3/41 Inductive proximity sensors Cylindrical type, M30 x 1.5 threaded Metal case (brass), short d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 40.5 b = 32 Nominal sensing distance (Sn) 10 mm Increased range model 20 mm 10 mm Increased range model 20 mm a = 50 b = 30 References 3-wire a PNP NO XS1-N30PA340 XS1-N30PA349 XS1-N30PA340D XS1-N30PA349D NPN NO XS1-N30NA340 XS1-N30NA349 XS1-N30NA340D XS1-N30NA349D 0.160 0.160 0.100 0.100 Weight (kg) 3 Characteristics Connector Connector (types 9, (types 9, 10, 15, 16) (2) 10, 11/12, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) Connection Pre-cabled, 3 or 4 x 0.34 mm2, length 2 m (1) Degree of protection IP 67 Operating temperature - 25…+ 70 °C Output state indication LED, annular Voltage limits (including ripple) a 10…38 V (c 24 V rectified and filtered) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 1000 Hz - 25…+ 50 °C - 25…+ 70 °C - 25…+ 50 °C LED, 4 viewing ports at 90° ≤ 2.6 V ≤2V ≤ 2.6 V 15 Hz 1000 Hz 15 Hz Wiring schemes 3-wire a, NO output XS1/XS2-N30i340/340D/349/349D BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) – (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-N30PA340 with 5 m cable becomes XS1-N30PA340L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. 3/42 Te Weight increase 0.120 kg 0.320 kg Non flush mountable in metal a = 40.5 b = 19 c = 13 a = 50 b = 19 c = 13 15 mm 15 mm XS2-N30PA340 XS2-N30PA340D XS2-N30NA340 XS2-N30NA340D 0.160 0.100 3 Pre-cabled, 3 or 4 x 0.34 mm2, length 2 m (1) Connector (types 9, 10, 15, 16) (2) IP 67 Depending on connector (see pages 3/58 and 3/59) - 25…+ 70 °C LED, annular LED, 4 viewing ports at 90° a 10…38 V (c 24 V rectified and filtered) 0…200 mA with overload and short-circuit protection ≤2V ≤ 10 mA 1000 Hz Te 3/43 Inductive proximity sensors Cylindrical type, M30 x 1.5 threaded Metal case (brass), form A d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 60 b = 51.5 Nominal sensing distance (Sn) 10 mm 10 mm 10 mm 10 mm a = 70 b = 51.5 References 3-wire a 3 4-wire a universal model PNP NO XS1-M30PA370 – XS1-M30PA370D – NPN NO XS1-M30NA370 – XS1-M30NA370D – – XS1-M30KP340 – XS1-M30KP340D 0.205 0.205 0.145 0.145 PNP/NPN NO/NC programmable Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V (3) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 1000 Hz Connector (types 9, 10, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) LED, 4 viewing ports at 90° a 10…38 V (4) a 10…58 V (3) ≤ 2.6 V ≤2V a 10…38 V (4) ≤ 2.6 V Wiring schemes 3-wire a, NO output XS1-M30ii370/370D 4-wire a programmable, NO or NC output XS1-M30KP340/340D BN/1 (NO), BU/3 (NC) BN/1 (NO), BU/3 (NC) BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) PNP WH/2 + BK/4 – – BU/3 (NO), BN/1 (NC) (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS1-M30PA370 with 5 m cable becomes XS1-M30PA370L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. (3) Can be supplied with rectified c 24 V. (4) c 24 V rectified and filtered. 3/44 Te + NPN WH/2 BK/4 BU/3 (NO), BN/1 (NC) Weight increase 0.120 kg 0.320 kg – Inductive proximity sensors Cylindrical type, M30 x 1.5 threaded Metal case (brass), form A d.c. supply (continued) References, characteristics, dimensions, schemes Accessories : page 3/59 Non flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 60 b = 38.5 c = 13 Nominal sensing distance (Sn) 15 mm 15 mm 15 mm 15 mm a = 70 b = 38.5 c = 13 References 3-wire a PNP NO XS2-M30PA370 – XS2-M30PA370D – NPN NO XS2-M30NA370 – XS2-M30NA370D – NO/NC – XS2-M30KP340 – XS2-M30KP340D 0.205 0.205 0.145 0.145 4-wire a PNP/NPN universal model programmable Weight (kg) 3 Characteristics Connection Pre-cabled, 3 x 0.34 mm 2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication LED, annular Voltage limits (including ripple) a 10…58 V (3) Switching capacity 0…200 mA with overload and short-circuit protection Voltage drop, closed state ≤2V Current consumption, no-load ≤ 10 mA Maximum switching frequency 1000 Hz Connector (types 9, 10, 15, 16) (2) Depending on connector (see pages 3/58 and 3/59) LED, 4 viewing ports at 90° a 10…38 V (4) a 10…58 V (3) ≤ 2.6 V ≤2V a 10…38 V (4) ≤ 2.6 V Wiring schemes 3-wire a, NO output XS2-M30ii370/370D BN/1 PNP BU/3 + BK/4 (NO) BK/2 (NC) – 4-wire a programmable, NO or NC output XS2-M30KP340/340D BN/1 (NO), BU/3 (NC) BN/1 (NO), BU/3 (NC) BN/1 NPN BU/3 + BK/4 (NO) BK/2 (NC) PNP WH/2 NPN BK/4 – + + – BU/3 (NO), BN/1 (NC) (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L1 10 m L2 Example : sensor XS2-M30PA370 with 5 m cable becomes XS2-M30PA370L1 (2) The type numbers refer to suitable female connectors and extension cables, see pages 3/58 and 3/59. (3) Can be supplied with rectified c 24 V. (4) c 24 V rectified and filtered. WH/2 BK/4 – BU/3 (NO), BN/1 (NC) Weight increase 0.120 kg 0.320 kg Te 3/45 Inductive proximity sensors Cylindrical type, M30 x 1.5 threaded Metal case (brass), form A a.c. or d.c. supply References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 60 b = 51.5 AC/DC Nominal sensing distance (Sn) 10 mm References 2-wire c or a 3 2-wire c or a (protected against short-circuits) NO XS1-M30MA230 NC XS1-M30MB230 NO XS1-M30MA250 NC XS1-M30MB250 Weight (kg) 0.205 Characteristics Connection Pre-cabled, 2 x 0.5 mm2, length 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication non protected model LED, annular protected model 1 red LED (output state), 1 green LED (supply and short-circuit indication) Voltage limits (including ripple) c or a 20…264 V Switching capacity (c) 5…300 mA or (a) 5…200 mA (2) Voltage drop, closed state ≤ 5.5 V Current consumption, no-load – Maximum switching frequency (c) 25 Hz or (a) 100 Hz Wiring schemes 2-wire c or a, NO or NC output XS1-M30Mi230/250 BN/2 BU/3 For connector version sensors (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors Weight increase 5m L1 0.120 kg 10 m L2 0.320 kg Example : sensor XS1-M30MA230 with 5 m cable becomes XS1-M30MA230L1 (2) For the sensors not incorporating overload or short-circuit protection, it is recommended that a 0.8 A “quick-blow” fuse be connected in series with the load. 3/46 Te Inductive proximity sensors Cylindrical type, M30 x 1.5 threaded Metal case (brass), form A a.c. or d.c. supply (continued) References, characteristics, dimensions, schemes Accessories : page 3/59 Non flush mountable in metal b c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors a = 60 b = 38.5 c = 13 AC/DC Nominal sensing distance (Sn) 15 mm References 2-wire c or a 2-wire c or a (protected against short-circuits) NO XS2-M30MA230 NC XS2-M30MB230 NO XS2-M30MA250 NC XS2-M30MB250 Weight (kg) 3 0.205 Characteristics Connection Pre-cabled, 2 x 0.5 mm2, L = 2 m (1) Degree of protection IP 68 Operating temperature - 25…+ 80 °C Output state indication non protected model protected model LED, annular 1 red LED (output state) 1 green LED (supply and short-circuit indication) Voltage limits (including ripple) c or a 20…264 V Switching capacity (c) 5…300 mA or (a) 5…200 mA (2) Voltage drop, closed state ≤ 5.5 V Current consumption, no-load – Maximum switching frequency (c) 25 Hz or (a) 75 Hz Wiring schemes 2-wire c or a, NO or NC output XS2-M30ii2i0 BN/2 BU/3 For connector version sensors (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors Weight increase 5m L1 0.120 kg 10 m L2 0.320 kg Example : sensor XS2-M30MA230 with 5 m cable becomes XS2-M30MA230L1 (2) For the sensors not incorporating overload or short-circuit protection, it is recommended that a 0.8 A “quick-blow” fuse be connected in series with the load. Te 3/47 Inductive proximity sensors Compact block (12 x 26 x 40 mm), plastic, type XSG a.c. or d.c. supply References, characteristics, schemes Accessories : page 3/59 Nominal sensing distance (Sn) Flush mountable in metal Non flush mountable in metal 2 mm 4 mm References 4-wire a (complementary outputs) PNP NO + NC XSG-H027330 XSG-H047330 NPN NO + NC XSG-J027330 XSG-J047330 0.180 0.180 Weight (kg) 3 Characteristics Connection Pre-cabled, length 2 m (1) 4 x 0.34 mm2 Degree of protection IP 65 Operating temperature - 25…+ 70 °C Output state indication LED, at rear Voltage limits (including ripple) a 10…58 V Switching capacity 0…200 mA (2) Voltage drop, closed state ≤ 1.8 V Current consumption, no-load ≤ 10 mA Maximum switching frequency 1000 Hz 800 Hz Wiring schemes 4-wire a NO + NC output + + BN PNP BU BN BK (NO) WH (NC) NPN – BU BK (NO) WH (NC) – (1) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above for 2 m pre-cabled sensors 5m L05 10 m L10 Example : sensor XSG-H027330 with 5 m cable becomes XSG-H027330L05 (2) With overload and short-circuit protection. 3/48 Te Weight increase 0.120 kg 0.320 kg Inductive proximity sensors Plug-in compact block (41 x 50 x 76 mm), plastic, type XSB a.c. or d.c. supply References, characteristics, schemes Accessories : page 3/59 Non flush mountable in metal Nominal sensing distance (Sn) DC AC 25 mm 25 mm References 2-wire a NO XSB-C25710 – 2-wire c NO – XSB-A25911 NC – XSB-A25921 0.190 0.190 Weight (kg) 3 Characteristics Connection Screw terminals, capacity : 2 x 1.5 mm2 Degree of protection IP 67 Operating temperature - 25… + 70 °C Output state indication – LED Voltage limits (including ripple) a 12…58 V c 93…264 V Switching capacity (1) 1.5…80 mA 20…150 mA Voltage drop, closed state ≤7V ≤ 9.5 V Current consumption, no-load – – Maximum switching frequency 250 Hz 40 Hz Wiring schemes 2-wire a NO output 2-wire c NO output NC output 1 + 3 1 4 – 4 2 (1) For XSB-A (c) sensors, not incorporating overload or short-circuit protection, it is recommended that a 0.63 A “quick-blow” fuse be connected in series with the load. Te 3/49 Inductive proximity sensors Plug-in block form C (41 x 40 x 117 mm), plastic, type XS7 5 position turret head d.c. supply References, characteristics, schemes Accessories : page 3/59 Flush mountable in metal Nominal sensing distance (Sn) 15 mm Increased range model 20 mm 15 mm References 4-wire a (complementary outputs) 3 2-wire a (non polarised) PNP NO + NC XS7-C40PC440H29 XS7-C40PC449H29 – NPN NO + NC XS7-C40NC440H29 XS7-C40NC449H29 – – – XS7-C40DA210H29 – – XS7-C40DP210H29 0.220 0.220 0.220 NO NO or NC programmable Weight (kg) Characteristics Connection Screw terminals, capacity : 2 or 4 x 1.5 mm2 Degree of protection IP 67 Operating temperature - 25…+ 70 °C Supply/output state indication Output LED + Supply LED Voltage limits (including ripple) a 10…58 V Switching capacity (with overload and short-circuit protection) 0…200 mA 1.5…100 mA Voltage drop, closed state ≤2V ≤ 5.2 V Current consumption, no-load ≤ 10 mA – Maximum switching frequency 1000 Hz 150 Hz Output LED Wiring schemes 2-wire a (non polarised) NO or NC output depending on position of link 4-wire a NO + NC output + 5 +/– 1 PNP NPN 2 (NC) 6 –/+ NO NO NC NC 3/50 Te 3 + 1 4 (NO) – 3 4 (NO) 2 (NC) – Inductive proximity sensors Plug-in block form C (41 x 40 x 117 mm), plastic, type XS8 5 position turret head d.c. supply References, characteristics, schemes Accessories : page 3/59 Non flush mountable in metal Nominal sensing distance (Sn) 20 mm Increased range model 40 mm 20 mm References 4-wire a (complementary outputs) PNP NO + NC XS8-C40PC440H29 XS8-C40PC449H29 – NPN NO + NC XS8-C40NC440H29 XS8-C40NC449H29 – 2-wire a (non polarised) NO or NC programmable – – XS8-C40DP210H29 0.220 0.220 0.220 Weight (kg) 3 Characteristics Connection Screw terminals, capacity : 2 or 4 x 1.5 mm2 Degree of protection IP 67 Operating temperature - 25…+ 70 °C Supply/output state indication Output LED + Supply LED Voltage limits (including ripple) a 10…58 V Switching capacity (with overload and short-circuit protection) 0…200 mA 1.5…100 mA Voltage drop, closed state ≤2V ≤ 5.2 V Current consumption, no-load ≤ 10 mA – Maximum switching frequency 1000 Hz Output LED 500 Hz 100 Hz Wiring schemes 2-wire a (non polarised) NO or NC output depending on position of link 4-wire a NO + NC output + + 5 +/– 1 1 PNP 4 (NO) NPN 2 (NC) 6 –/+ NO NO NC NC 3 – 3 4 (NO) 2 (NC) – Te 3/51 Inductive proximity sensors Plug-in block form C (41 x 40 x 117 mm), plastic, types XS7 and XS8 5 position turret head a.c. or d.c. supply References, characteristics, schemes Accessories : pages 3/59 Nominal sensing distance (Sn) Flush mountable in metal Non flush mountable in metal AC AC AC/DC 15 mm AC/DC 20 mm References 3 2-wire c NO/NC programmable XS7-C40FP260H29 – XS8-C40FP260H29 – 2-wire c or a universal model NO/NC programmable – XS7-C40MP230H29 – XS8-C40MP230H29 0.220 0.220 0.220 0.220 Weight (kg) Characteristics Connection Screw terminals, capacity : 2 x 1.5 mm2 Degree of protection IP 67 Operating temperature - 25…+ 70 °C Supply/output state indication Output LED Voltage limits c 20…264 V Switching capacity c or a 20…264 V c 5…300 mA or 5…500 mA (1)(2 A inrush) a 5…200 mA (1) Voltage drop, open state ≤ 5.5 V Current consumption, no-load – Maximum switching frequency 25 Hz c 20…264 V c or a 20…264 V c 5…300 mA or 5…500 mA (1)(2 A inrush) a 5…200 mA (1) c 25 Hz, a 50 Hz c 25 Hz, a 50 Hz 25 Hz Wiring schemes 2-wire c programmable NO or NC output depending on position of link 2-wire c or a programmable NO or NC output depending on position of link 5 5 6 6 NO NO NC NC (1) These sensors do not incorporate overload or short-circuit protection and therefore, it is recommended that a 0.8 A “quick-blow” fuse be connected in series with the load. 3/52 Te Inductive proximity sensors Plug-in block form D (40 x 80 x 100 mm), plastic, type XSD d.c. supply and a.c./d.c. supply References, characteristics, schemes Accessories : page 3/59 Non flush mountable in metal DC Nominal sensing distance (Sn) AC/DC 30…60 mm (1) References 4-wire a (complementary outputs) PNP 2-wire c or a universal model NO + NC XSD-H607339 – NO or NC – programmable Weight (kg) XSD-M600539 0.480 3 0.480 Characteristics Connection Screw terminals, capacity : 2 x 1.5 mm 2 Degree of protection IP 67 Operating temperature - 25…+ 70 °C Supply/output state indication Output LED Output LED + Supply LED + Short-circuit LED Voltage limits (including ripple) a 10…58 V c or a 20...264 V Switching capacity (with overload and short-circuit protection) 0…200 mA c ) 5...500 mA (a a ) 5...100 mA or (c Voltage drop, closed state ≤ 1.8 V ≤6V Current consumption, no-load ≤ 10 mA – Maximum switching frequency 20 Hz 10 Hz Wiring schemes 4-wire a NO + NC output 3 2-wire c or a programmable NO output 1 1 PNP + + 4 (NO) 2 (NC) NPN – 3 NC output 5 4 (NO) 2 (NC) – 7 8 6 5 7 8 6 (1) XSD-i60 sensors incorporate a sensing distance adjustment potentiometer. This enables adjustment to suit the following requirements : - limiting the effects of surrounding objects (by decreasing the sensing distance), - increasing the sensing distance up to 48 mm, using a standard mild steel target. Settings above 48 mm are not recommended. Te 3/53 Inductive proximity sensors 3 Analogue output models Cylindrical type, M12 x 1 threaded, metal or plastic case Pre-cabled with 2 m cable References, characteristics, dimensions, schemes Accessories : page 3/59 Flush mountable in metal Non flush mountable in metal a = 50 b = 42 a = 50 b = 42 a = 50 b = 42 Metal case Plastic case Plastic case 0.2…2 mm 0.4…4 mm 0.4…4 mm b a Lengths (mm) : a = Overall b = Threaded section Nominal sensing distance (Sn) References 3-wire a 3 Output 0…10 mA (1) 4…14 mA (2) – – XS4-P12AB110 Output 4…20 mA (2) 0…16 mA (1) XS1-M12AB120 XS4-P12AB120 – 0.075 0.065 0.065 Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m Degree of protection IP 67 Ambient air temperature Operation : - 25…+ 70 °C Voltage limits (including ripple) a 15…38 V Output current drift θ ambient : - 25…+ 70 °C ≤ 10 % a 15…38 V a 15…58 V Current consumption, no-load 4 mA (1) Output current range for “3-wire” connection, see schemes below. (2) Output current range for “2-wire” connection, see schemes below. Wiring schemes 2-wire connection 3-wire connection BN/1 mA BN/1 + BK/4 mA Output current R BU/3 Is BU/3 – Output current Value of R (R = load impedance) 24 V 4…14 mA ≤ 640 Ω 4…20 mA ≤ 450 Ω 48 V 4…14 mA ≤ 2350 Ω Ensure a minimum of 15 V between the + (1) and - (3) terminals of the sensor Other versions 3/54 Te BK/4 + Output voltage Is R U=R.Is – Output current Value of R (R = load impedance) 24 V 0…10 mA ≤ 1800 Ω 0…16 mA ≤ 1125 Ω 48 V 0…10 mA ≤ 4200 Ω Ensure a minimum of 5 V between the + and sensor output (terminal 4) “Original equipment” range Ø 12 mm sensors with analogue output (XSP-Hiii62). Please consult your Regional customer centre. Inductive proximity sensors Analogue output models Cylindrical type, M18 x 1 threaded, metal or plastic case Pre-cabled with 2 m cable References, characteristics, dimensions, schemes Accessories : page 3/59 b Flush mountable in metal Non flush mountable in metal a = 50 b = 42 c=0 Metal case a = 40.6 b = 26 c=8 Plastic case a = 40.6 b = 26 c=8 Plastic case 0.5…5 mm 0.8…8 mm 0.8…8 mm c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors Nominal sensing distance (Sn) References 3-wire a Output 0…10 mA (1) 4…14 mA (2) – – XS4-P18AB110 Output 4…20 mA (2) 0…16 mA (1) XS1-M18AB120 XS4-P18AB120 – 0.120 0.080 0.080 Weight (kg) 3 Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m Degree of protection IP 67 Ambient air temperature Operation : - 25…+ 70 °C Voltage limits (including ripple) a 15…38 V Output current drift θ ambient : - 25…+ 70 °C ≤ 10 % a 15…58 V Current consumption, no-load 4 mA 1) Output current range for “3-wire” connection, see schemes below. (2) Output current range for “2-wire” connection, see schemes below. Wiring schemes 2-wire connection 3-wire connection BN/1 mA BN/1 + BK/4 mA Output current R BU/3 Is BU/3 – Output current Value of R (R = load impedance) 24 V 4…14 mA ≤ 640 Ω 4…20 mA ≤ 450 Ω 48 V 4…14 mA ≤ 2350 Ω Ensure a minimum of 15 V between the + (1) and - (3) terminals of the sensor Other versions BK/4 + Output voltage Is R U=R.Is – Output current Value of R (R = load impedance) 24 V 0…10 mA ≤ 1800 Ω 0…16 mA ≤ 1125 Ω 48 V 0…10 mA ≤ 4200 Ω Ensure a minimum of 5 V between the + and sensor output (terminal 4) “Original equipment” range Ø 18 mm sensors with analogue output (XSP-Hiii62). Please consult your Regional customer centre. Te 3/55 Inductive proximity sensors Analogue output models Cylindrical type, M30 x 1.5 threaded, metal or plastic case Pre-cabled with 2 m cable References, characteristics, dimensions, schemes Accessories : page 3/59 b Flush mountable in metal Non flush mountable in metal a = 50 b = 42 c=0 Metal case a = 52.6 b = 32 c = 13 Plastic case a = 52.6 b = 32 c = 13 Plastic case 1…10 mm 1.5…15 mm 1.5…15 mm c a Lengths (mm) : a = Overall b = Threaded section c = For non flush mounting sensors Nominal sensing distance (Sn) References 3-wire a 3 Output 0…10 mA (1) 4…14 mA (2) – – XS4-P30AB110 Output 4…20 mA (2) 0…16 mA (1) XS1-M30AB120 XS4-P30AB120 – 0.200 0.100 0.100 Weight (kg) Characteristics Connection Pre-cabled, 3 x 0.34 mm2, length 2 m Degree of protection IP 67 Ambient air temperature Operation : - 25…+ 70 °C Voltage limits (including ripple) a 15…38 V Output current drift θ ambient : - 25…+ 70 °C ≤ 10 % a 15…58 V Current consumption, no-load 4 mA (1) Output current range for “3-wire” connection, see schemes below. (2) Output current range for “2-wire” connection, see schemes below. Wiring schemes 2-wire connection 3-wire connection BN/1 mA + BK/4 Output current R BU/3 Is – Output current Value of R (R = load impedance) 24 V 4…14 mA ≤ 640 Ω 4…20 mA ≤ 450 Ω 48 V 4…14 mA ≤ 2350 Ω Ensure a minimum of 15 V between the + (1) and - (3) terminals of the sensor 3/56 Te BN/1 mA BK/4 BU/3 + Output voltage Is R U=R.Is – Output current Value of R (R = load impedance) 24 V 0…10 mA ≤ 1800 Ω 0…16 mA ≤ 1125 Ω 48 V 0…10 mA ≤ 4200 Ω Ensure a minimum of 5 V between the + and sensor output (terminal 4) Inductive proximity sensors For specific applications : rotation monitoring Cylindrical type, metal case References, characteristics, dimensions, schemes Accessories : page 3/59 Ø Flush mountable in metal b a Lengths (mm) : a = Overall b = Threaded section a = 81 b = 57 Ø = M30 x 1.5 Nominal sensing distance (Sn) 10 mm 10 mm 10 mm XSA-V11373 – – References 3-wire a PNP Impulses/minute 6…150 XSA-V12373 – – 2-wire c 120…3000 Impulses/minute 6…150 – XSA-V11151 XSA-V11161 120…3000 – XSA-V12151 XSA-V12161 0.300 0.300 0.300 Connection (2) Pre-cabled, 3 x 0.34 mm2, length 2 m Pre-cabled, 2 x 0.5 mm2, length 2 m Degree of protection IP 67 Operating temperature (1) - 25…+ 70 °C Output state indication LED Voltage limits (including ripple) a 10…58 V c 93…132 V Switching capacity 0…200 mA with overload & short-circuit protection 20…350 mA (2 A inrush) Voltage drop, closed state ≤ 1.8 V ≤ 4.5 V Current consumption, no-load ≤ 10 mA – Maximum switching frequency 6000 impulses/minute (for XSA-V11iii) ; 48,000 impulses/minute (for XSA-V12 iii) Weight (kg) 3 Characteristics c 187…264 V Wiring schemes 3-wire a 2-wire c + BN/1 PNP BN BK/4 BU/3 BU – (1) Other operating temperature ranges : - 40…+ 70 °C (To order, add suffix TF to above refs.), - 25…+ 85 °C (To order, add suffix TT to above refs.). (2) Sensors pre-cabled with other cable lengths : Length of cable Suffix to be added to references stated above Weight increase 5m L05 0.120 kg 10 m L10 0.320 kg Example : sensor XSA-V11373 with 5 m cable becomes XSA-V11373L05 Other versions Sensors without initial “run-up” delay, or with reduced “run-up” delay on energisation of 3 seconds. SX2-DV units for monitoring overspeed or underspeed conditions, in the range 0 to 6000 impulses/ minute. Please consult your Regional customer centre. Te 3/57 Inductive proximity sensors Female connectors References, characteristics, dimensions, schemes Connector type No 9 10 11 12 Number of pins 4 4 4 4 Female connector version M12 straight M12 elbowed M12 elbowed M12 elbowed L=2m XZ-CP1141L2 XZ-CP1241L2 XZ-CP1340L2 XZ-CP1440L2 L=5m XZ-CP1141L5 XZ-CP1241L5 XZ-CP1340L5 XZ-CP1440L5 L = 10 m XZ-CP1141L10 XZ-CP1241L10 XZ-CP1340L10 XZ-CP1440L10 References PVR cable connection, Ø 5 mm 3 Weight (kg) 0.090 (L = 2 m), 0.190 (L = 5 m), 0.370 (L = 10 m) 0.080 (L = 2 m), 0.180 (L = 5 m), 0.350 (L = 10 m) Characteristics Wiring configuration, PNP/NPN – – PNP wiring NPN wiring Degree of protection IP 67 IP 67 IP 67 IP 67 Ambient air temperature -35…+80 °C -35…+80 °C -35…+80 °C -35…+80 °C Number of wires and c.s.a. 4 x 0.25 mm2 4 x 0.25 mm2 3 x 0.25 mm 2 3 x 0.25 mm2 LED indication No No 2 LEDs 2 LEDs Associated sensor references iiiiiiii XSi iD i -i iiiiiiii XSi iD i -i iiiiiiii XSi iD i -i iiiiiiii XSi iD i -i Dimensions XZ-CP1865Li i Ø14,5 XZ-CP1965Li i 1/2" 20 UNF 1/2" 20 UNF 40 27 26 32 i XZ-CP1340Li i , XZ-CP1440Li M12x1 40 40 42 26 M12x1 42 XZ-CP1241Li i M12x1 32 Ø14,5 32 XZ-CP1141Li i (1) L L L L L 20 20 20 (1) 2 LEDs, voltage limits a 10…30 V max. L = 2, 5 or 10 m Connection schemes i XZ-CP1i i 41Li i XZ-CP1i i 41Li LED connections XZ-CP1340Li i BU BU PNP BN 1 BK BK 3 4 3 4 2 1 2 1 4 WH BN BN Te Signal 4 GN BU GN – BK 1 Signal YW YW 3 3/58 NPN BU 3 + BK 2 i XZ-CP1i i 65Li XZ-CP1440Li i – 2 1 3 GN BN + RD/WH 2 RD/BK Inductive proximity sensors Female connectors (continued) and sensor fixing accessory References, characteristics, dimensions, schemes Connector type No 13 14 Number of pins 3 3 Female connector version 1/2" 20 UNF straight 1/2" 20 UNF straight L=2m XZ-CP1865L2 XZ-CP1965L2 L=5m XZ-CP1865L5 XZ-CP1965L5 L = 10 m XZ-CP1865L10 XZ-CP1965L10 References PVR cable connection, Ø 5 mm Weight (kg) 3 0.080 (L = 2 m), 0.180 (L= 5 m), 0.350 (L = 10 m) Characteristics Wiring configuration, PNP/NPN – – Degree of protection IP 67 IP 67 Ambient air temperature -35…+80 °C -35…+80 °C Number of wires and c.s.a. 3 x 0.34 mm2 3 x 0.34 mm2 LED indication No No Associated sensor references iiiiiiii XSi iK i -i iiiiiiii XSi iK i -i Dimensions and connection schemes Shown on previous page Saddle clamp fixing accessory for cylindrical type sensors Description Saddle clamps For use with sensors Type Diameter (mm) Reference Weight kg XS1 4 (plain) XSZ-B104 0.005 5 (M5 x 0.5) XSZ-B105 0.005 XS1, XS2 6.5 (plain) XSZ-B165 0.005 XS1, XS2, XS4 8 (M8 x 1) XSZ-B108 0.006 12 (M12 x 1) XSZ-B112 0.006 18 (M18 x 1) XSZ-B118 0.010 30 (M30 x 1.5) XSZ-B130 0.020 XSZ-B1ii XS1, XS2, XS4 Te 3/59