AXIAL LEAD AND CARTRIDGE FUSES SUBMINIATURE GLASS BODY 2AG Fast-Acting Type U® L MIL ® The 2AG Fast-Acting fuses are available in cartridge form or with axial leads. Axial leaded fuses are board washable. 2AG fuses provide the same performance characteristics as their 3AG counterpart, while occupying one-third the space. Sleeved fuses are available. ELECTRICAL CHARACTERISTICS: Opening Time 4 hours, Minimum 1 hour, Maximum 1 second, Maximum Cartridge Catalog Number 225.100 225.125 225.250 225.375 225.500 225.750 225 001 225 01.5 225 002 225 02.5 225 003 225 03.5 225 004 225 005 225 006 225 007 225 008 225 010 Axial Lead Catalog Ampere Voltage Number Rating Rating 224.100 1/10 250 224.125 1/8 250 224.250 1/4 250 224.375 3/8 250 224.500 1/2 250 224.750 3/4 250 224 001 1 250 250 224 01.5 11/2 224 002 2 250 1 250 224 02.5 2 /2 224 003 3 250 224 03.5 31/2 250 224 004 4 125 224 005 5 125 224 006 6 125 224 007 7 125 224 008 8 125 224 010 10 125 Nominal Resistance Cold Ohms 6.15 3.90 1.15 0.395 0.265 0.152 0.102 0.0705 0.0490 0.0365 0.0310 0.0258 0.0233 0.0179 0.0147 0.0123 0.0100 0.00675 Nominal Melting I 2t A2 Sec. 0.000750 0.00286 0.0300 0.171 0.365 1.05 2.22 0.800 1.50 2.68 4.62 6.70 9.40 17.00 22.1 40.0 56.0 116.0 2AG Special 350V Fast-Acting Type 225 000 Series 224 000 Series .025" .177" .177" .57" .57" 1.50" TYP. Axial Lead Material: Solder coated copper. 1/4A 3/8A 1/2A 3/4A 1A 1 1/2A 2A 2 1/2A 3A 4A 5A 6A 7A 8A 10A Average Time Current Curves 1/10A 1/8A AGENCY APPROVALS: Listed by Underwriters Laboratories and Certified by CSA. 224 Series approved by MITI from 1 through 5 amperes. AGENCY FILE NUMBERS: UL E10480, CSA LR 29862. FUSES TO MIL SPEC: 224 and 225 Series 1/8 through 7 amperes are available to DESC Drawing #87108. To order, change 224 to 289 or 225 to 288. INTERRUPTING RATINGS: 0.1–10A 10,000 amperes at 125 VAC 0.1–1A 35 amperes at 250 VAC 1.5 – 3.5A 100 amperes at 250 VAC OPTIONS: 224 Series available on tape and reel. PACKAGING SPECIFICATIONS: Tape and Reel per EIA-296; T1: 52.4mm (2.062") taped spacing; For 1,500 per reel, 10mm (.40") spacing, add packaging suffix, DRT1. For 2,500 per reel, 5mm (.20") spacing, add packaging suffix, ERT1. PATENTED ORDERING INFORMATION: 100 10 TIME IN SECONDS % of Ampere Rating 110% 135% 200% 1 0.1 0.01 ® ® The 220 007 subminiature fuse is intended for fluorescent lighting ballast protection or similar applications up to 350V. AXIAL LEAD PART NUMBER: 220 007 (ampere rating of 3A). DIMENSIONS: Same as 224 Series. ELECTRICAL CHARACTERISTICS: Same as 224 Series. INTERRUPTING RATING: 100 amperes at 350 VAC. PATENTED Contact Littelfuse concerning other ampere ratings. 48 0.001 0.1 1 10 100 CURRENT IN AMPERES 1000