2SA1734T2G Preferred Device PNP Silicon Transistor The device is housed in the SOT-89 package, which is designed for medium power surface mount applications. • High Current: 1.2 Amp • Available in 7 inch/1000 unit Tape and Reel • Device Marking: SA http://onsemi.com MEDIUM POWER PNP SILICON HIGH CURRENT TRANSISTOR SURFACE MOUNT MAXIMUM RATINGS (TC = 25°C unless otherwise noted) Rating Symbol Value Unit Collector-Emitter Voltage VCEO −30 Vdc Collector-Base Voltage VCBO −40 Vdc Emitter-Base Voltage VEBO −6 Vdc IC −1.2 Adc 1.56 13 0.67 5.0 Watts mW/°C Watts mW/°C −65 to 150 °C Collector Current Total Power Dissipation @ TA = 25°C Derate above 25°C PD (Note 1) (Note 2) Operating and Storage Temperature Range TJ, Tstg COLLECTOR 2 BASE 1 EMITTER 3 THERMAL CHARACTERISTICS Characteristic Thermal Resistance Junction-to-Ambient (surface mounted) Symbol Max RJA (Note 1) (Note 2) 60 190 Maximum Temperature for Soldering Purposes Time in Solder Bath Unit °C/W MARKING DIAGRAM 1 TL °C Sec 260 10 1. FR−4 @ 1.0 X 1.0 inch Pad 2.0 oz. Cu PCB 2. FR−4 @ Minimum Pad YM 2 3 SA SOT−89 CASE 1213 STYLE 2 Y = Year Code M = Month Code SA = Device Code ORDERING INFORMATION Device Package Shipping 2SA1734T2G SOT−89 1000/Tape & Reel Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2003 August, 2003 − Rev. 0 1 Publication Order Number: 2SA1734T2G/D 2SA1734T2G ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max −30 − − − − −0.1 − − −0.1 120 40 − − 400 − − − −0.5 Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 3) (IC = −10 mAdc, IB = 0) V(BR)CEO Collector Cutoff Current (VCB = −40 Vdc, IE = 0) ICBO Emitter Cutoff Current (VEB = −6.0 V, IC = 0) IEBO Vdc Adc Adc ON CHARACTERISTICS (Note 3) DC Current Gain (IC = −100 mA, VCE = −2.0 V) (IC = −1.0 A, VCE = −2.0 V) hFE − Collector −Emitter Saturation Voltage (IC = −700 mA, IB = −35 mA) VCE(sat) Vdc Base −Emitter Saturation Voltage (IC = −700 mA, IB = −35 mA) VBE(sat) − − −1.2 Vdc fT − 100 − MHz COB − 16 − pF SMALL−SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (Note 4) (IC = −100 mAdc, VCE = −2.0 Vdc, f = 100 MHz) Collector Output Capacitance (VCB = −10 Vdc, IE = 0 mAdc, f = 1.0 MHz) 3. Pulse Test: Pulse Width ≤ 300 s, Duty Cycle = 2.0%. 4. fT is defined as the frequency at which |hfe| extrapolates to unity. http://onsemi.com 2 2SA1734T2G 250 VCE = −2.0 V −1.8 −1.6 200 175 150 V, VOLTAGE (VOLTS) hFE , DC CURRENT GAIN 225 −2.0 TJ = 125°C 25°C 125 100 75 −55 °C −1.4 −1.2 −0.8 −0.4 25 −0.2 0 −50 −100 −200 −500 −1.0 A −2.0 A −4.0 A IC, COLLECTOR CURRENT (mA) VBE(on) @ VCE = 2.0 V −0.6 50 0 −10 −20 VBE(sat) @ IC/IB = 10 −1.0 VCE(sat) @ IC/IB = 10 −50 −100 Figure 1. Typical DC Current Gain VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) −4.0 A −10 −0.9 −4.0 TJ = 25°C −0.8 −2.0 −0.7 1.0 ms −1.0 −0.6 −0.5 −0.5 −0.2 −0.4 IC = −500 mA −0.3 −0.1 −2.0 A Figure 2. On Voltages −1.0 −0.2 −200 −500 −1.0 A IC, COLLECTOR CURRENT (mA) IC = −2.0 A −0.1 −0.05 IC = −10 mA IC = −100 mA 0 −0.05 −0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 IB, BASE CURRENT (mA) −0.02 −0.01 −1.0 −50 −100 −200 −500 TA = 25°C TC = 25°C WIRE LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT −2.0 −5.0 −10 −20 −50 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 4. Safe Operating Area Figure 3. Collector Saturation Region http://onsemi.com 3 −100 2SA1734T2G PACKAGE DIMENSIONS SOT−89 (3−LEAD) CASE 1213−02 ISSUE C −A− NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. 1213−01 OBSOLETE, NEW STANDARD 1213−02. C J F −B− L K D 0.10 E G M T B S A S −T− SEATING PLANE 2 PL 0.10 M T B S A S DIM A B C D E F G H J K L MILLIMETERS MIN MAX 4.40 4.60 2.40 2.60 1.40 1.60 0.37 0.57 0.32 0.52 1.50 1.83 1.50 BSC 3.00 BSC 0.30 0.50 0.80 −−− −−− 4.25 INCHES MIN MAX 0.173 0.181 0.094 0.102 0.055 0.063 0.015 0.022 0.013 0.020 0.059 0.072 0.059 BSC 0.118 BSC 0.012 0.020 0.031 −−− −−− 0.167 STYLE 2: PIN 1. BASE 2. COLLECTOR 3. EMITTER H ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800−282−9855 Toll Free USA/Canada http://onsemi.com 4 2SA1734T2G/D