MILITARY DATA SHEET Original Creation Date: 05/17/96 Last Update Date: 07/30/96 Last Major Revision Date: 05/17/96 MN54F189-X REV 1A0 64-BIT RANDOM ACCESS MEMORY WITH 3-STATE OUTPUTS General Description The F189 is a high-speed 64-bit RAM organized as a 16-word by 4-bit array. Address inputs are buffered to minimize loading and are fully decoded on-chip. The outputs are 3-state and are in the high impedance state whenever the Chip Select (CS) input is HIGH. The outputs are active only in the Read mode and the output data is the complement of the stored data. Industry Part Number NS Part Numbers 54F189 54F189DLQB 54F189FLQB 54F189LLQB Prime Die M189 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -40 +25 +125 -40 +25 +125 -40 +25 +125 -40 MILITARY DATA SHEET MN54F189-X REV 1A0 Features - 3-State Outputs for Data Bus Applications Buffered Inputs Minimize Loading Diode Clamped Inputs Minimize Ringing Address Decoding On-Chip 2 MILITARY DATA SHEET MN54F189-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Storage Temperature -65 C to +150 C Ambient Temperature under Bias -55 C to +125 C Junction Temperature under Bias -55 C to +175 C Vcc Pin Potential to Ground Pin -0.5V to +7.0V Input Voltage (Note 2) -0.5V to +7.0V Input Current (Note 2) -30 mA to +5.0mA Voltage Applied to Output in HIGH State (with Vcc=0V) Standard Output TRI-STATE Output Current Applied to Output in LOW State (Max) -0.5V to Vcc -0.5V to +5.5V twice the rated Iol(mA) Note 1: Note 2: Absolute Maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Either voltage limit or current limit is sufficient to protect inputs. Recommended Operating Conditions Free Air Ambient Temperature Commercial Military Supply Voltage Military Commercial 0 C to +70 C -40 C to +125 C +4.5V to +5.5V +4.5V to +5.5V 3 MILITARY DATA SHEET MN54F189-X REV 1A0 Electrical Characteristics DC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Limited Temp Range: -40C to +125C SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS IIH Input High Current VCC=5.5V, VM=2.7V, VINH=5.5V 1, 3 INPUTS 20 uA 1, 2, 3 IBVI Input High Current VCC=5.5V, VM=7.0V, VINH=5.5V 1, 3 INPUTS 100 uA 1, 2, 3 IIL Input LOW Current VCC=5.5V, VM=0.5V 1, 3 An, Dn WE -0.6 mA 1, 2, 3 IIL2 Input LOW Current VCC= 5.5V, VM=0.5V 1, 3 INPUTS CS -1.2 mA 1, 2, 3 VOL Output LOW Voltage VCC=4.5V, VIL=0.8V, IOL=20mA, VINH=5.5V 1, 3 OUTPUTS 0.5 V 1, 2, 3 VOH Output High Voltage VCC=4.5V, VINH=5.5, VINL=0.0V, IOH=-1.0mA 1, 3 OUTPUTS 2.5 V 1, 2, 3 VOH3 Output HIGH Voltage VCC=4.5V, VINH=5.5V, VINL=0.0V, IOH3=-3.0mA, VIH=2.0V 1, 3 OUTPUTS 2.4 V 1, 2, 3 IOS Short Circuit Current VCC=5.5V, VINH=5.5V, VM=0.0V, VINL=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 VCD Input Clamp Diode Voltage VCC=4.5V, IM=-18mA, VINH=5.5V 1, 3 INPUTS -1.2 V 1, 2, 3 ICC Supply Current VCC=5.5V, VINH=5.5V, VINL=0.0V 1, 3 VCC 55 mA 1, 2, 3 ICEX Output HIGH Leakage Current VCC=5.5V, VINH=5.5V, VINL=0.0V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 IOZH Output Leakage Current VCC=5.5V, VM=2.7V, VINH=5.5V, VINL=0.0V, VIH=2.0V 1, 3 OUTPUTS 50 uA 1, 2, 3 IOZL Output Leakage Current VCC=5.5V, VM=0.5V, VINH=5.5V, VINL=0.0V, VIH=2.0V 1, 3 OUTPUTS -50 uA 1, 2, 3 AC PARAMETER (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Limited Temp Range: -40C to 125C CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS tpLH tpHL Access Time, HIGH or LOW Access Time, HIGH or LOW VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C 4 2, 4 An to On 11.0 26.0 ns 9 2, 4 An to On 9.0 32.0 ns 10, 11 2, 4 An to On 8.0 19.0 ns 9 2, 4 An to On 8.0 23.0 ns 10, 11 MILITARY DATA SHEET MN54F189-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Limited Temp Range: -40C to 125C CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL tpZH(1) tpZL(1) tpHZ(1) tpLZ(1) tpZH(2) tpZL(2) tpHZ(2) tpLZ(2) ts(L/H)(1) th(L/H)(1) PARAMETER Access Time HIGH or LOW Access Time HIGH or LOW Disable Time HIGH or LOW Disable Time HIGH or LOW Access Time HIGH or LOW Access Time HIGH or LOW Disable Time HIGH or LOW Disable Time HIGH or LOW Setup Time HIGH or LOW Hold Time or LOW HIGH CONDITIONS NOTES VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C 5 PINNAME MIN MAX UNIT SUBGROUPS 2, 4 CS to On 3.5 8.5 ns 9 2, 4 CS to On 3.5 10.5 ns 10, 11 2, 4 CS to On 5.0 13.5 ns 9 2, 4 CS to On 5.0 15.0 ns 10, 11 2, 4 CS to On 2.0 6.0 ns 9 2, 4 CS to On 2.0 8.0 ns 10, 11 2, 4 CS to On 3.0 8.0 ns 9 2, 4 CS to On 2.5 10.0 ns 10, 11 2, WE to 4, 6 On 6.5 28.0 ns 9 2, WE to 4, 6 On 6.5 37.5 ns 10, 11 2, WE to 4, 6 On 6.5 15.5 ns 9 2, WE to 4, 6 On 6.5 17.5 ns 10, 11 2, WE to 4, 6 On 4.0 10.0 ns 9 2, WE to 4, 6 On 3.5 12.0 ns 10, 11 2, 4 WE to On 4.0 13.0 ns 9 2, 4 WE to On 4.0 15.0 ns 10, 11 5 Dn to WE 10.0 ns 9 5 Dn to WE 11.0 ns 10, 11 5 Dn to WE 0 ns 9 5 Dn to WE 2.0 ns 10, 11 MILITARY DATA SHEET MN54F189-X REV 1A0 Electrical Characteristics AC PARAMETER(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Limited Temp Range: -40C to 125C CL=50pf, RL=500 OHMS, TR=2.5ns, TF=2.5ns SEE AC FIGS SYMBOL PARAMETER CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS ts(L/H)(2) Setup Time HIGH or LOW VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C 5 An to WE 0 ns 9, 10, 11 th(L/H)(2) Hold Time or LOW HIGH VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C 5 An to WE 2.0 ns 9, 10, 11 ts(L)(3) Setup Time HIGH or LOW VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C 5 CS to WE 0 ns 9, 10, 11 th(L)(3) Hold Time or LOW VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C 5 CS to WE 6.0 ns 9 5 CS to WE 7.5 ns 10, 11 5 WE 6.0 ns 9 5 WE 15.0 ns 10, 11 tw(L) Pulse Width HIGH Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: VCC=5.5V @25C, VCC=4.5 & 5.5V @ -40C/125C TR/TF=1.0ns Screen tested 100% on each device at +25C, +125C & -40C temperature, subgroups A1, 2, 3, 7 & 8. Screen tested 100% on each device at +25C temperature only, subgroup A9. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C, +125C & -40C temperature, subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25C subgroup A9, and periodically at +125C & -40C temperature, subgroups 10 & 11. GUARANTEED BUT NOT TESTED. (Design Characterization Data) Spurious transitions may occur on the OX outputs prior to specified access time during the write enable cycles. 6