BTE6000 - Series Precision stainless steel pressure transmitters FEATURES · 0 ... -1 bar to 0 ... 350 bar gage or absolute · For corrosive media · Flush mount versions · 0 - 10 V, 1 ... 6 V, 0 - 20 mA, 4 ... 20 mA output · Field interchangeable · For harsh environments SERVICE Pressure inlet: any liquid, gas or vapor compatible with 303 stainless steel. Housing: 303 stainless steel, protection class IP65 according to DIN400501 SPECIFICATIONS Temperature limits Storage Operating Compensated 1cm 1 inch ELECTRICAL CONNECTION Maximum ratings Supply voltage (reverse polarity protection) BTE6...G0, BTE6...G1 13 ... 30 V BTE6...G4, BTE6...G52 12 ... 36 V Maximum load current BTE6...G0, BTE6...G1 Scale: 0 - 10 V, 1 - 6 V output 10 mA -55°C to 100°C -40°C to 100°C 0°C to 70°C 4 - 20 mA output Humidity limits Vibration (5 Hz to 500 Hz) Mechanical shock Proof pressure3 0 - 95 %RH 10 gRMS 50 g 2 x rated pressure 0 - 20 mA output (see other pages) January 1998/102 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE6000 - Series Precision stainless steel pressure transmitters COMMON PERFORMANCE CHARACTERISTICS1 Characteristics Operating pressure BTE6001... BTE6N01... BTE6P01... BTE6002... BTE6005... BTE6010... BTE6016... BTE6035... BTE6070... BTE6350... Min. Typ. -1 -1 0 0 0 Thermal effects (0 to 70°C)4 Offset Span Thermal effects (-40°C to 0°C, 70°C to 100°C) Offset Span Non-linearity and hysteresis (BSL)5 Repeatability Long term stability6 Output noise (0 < f < 1 kHz) Response time (10% to 90%) Power supply rejection Offset Span 0.02 0.02 Max. Unit 1 +1 0 2 5 10 16 35 70 350 bar 0.05 0.05 0.03 0.03 ±0.2 ±0.1 ±0.2 ±0.04 1 %FSO/°C %FSO ms 0.05 0.05 %FSO/V INDIVIDUAL PERFORMANCE CHARACTERISTICS1 Ω, tamb = 25°C) (unless otherwise noted, VS = 15 V, RL > 100 kΩ 0 - 10 V output, BTE6...0 Characteristics Zero pressure offset Full scale span7 BTE6N... all other BTE6N... all other Min. Typ. Max. 4.85 -0.15 4.9 9.9 5.0 0 5.0 10.0 5.15 0.15 5.1 10.1 50 Output impedance Power consumption (no load) 100 1 - 6 V output, BTE6...1 Characteristics Zero pressure offset Full scale span7 Full scale output Output impedance Power consumption (no load) BTE6N... all other BTE6N... all other Unit V Ω mW Min. Typ. Max. Unit 3.35 0.85 2.4 4.9 3.5 1.0 2.5 5.0 6.0 3.65 1.15 2.6 5.1 V 50 Ω mW 100 January 1998/102 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE6000 - Series Precision stainless steel pressure transmitters INDIVIDUAL PERFORMANCE CHARACTERISTICS1 (unless otherwise noted, VS = 15 V, RL = 100 Ω, tamb = 25°C) 4 - 20 mA output, BTE6... 4 Characteristics Zero pressure offset Full scale span7 BTE6N... all other BTE6N... all other Min. Typ. Max. Unit 11.85 3.85 7.9 15.9 12.0 4.0 8.0 16.0 0.1 260 12.15 4.15 8.1 16.1 mA Min. Typ. Max. Unit 9.85 -0.15 9.9 19.9 10.0 0 10.0 20.0 0.1 260 10.15 0.15 10.1 20.1 mA Output impedance Power consumption (IL = 20 mA) 0 - 20 mA output, BTE6... 5 Characteristics Zero pressure offset Full scale span7 BTE6N... all other BTE6N... all other Output impedance Power consumption (IL = 20 mA) Ω mW Ω mW Specification Notes (for all devices) 1. 2. 3. 4. 5. 6. 7. 8. The package is a all-sealed housing. IP65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagrams. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. Thermal effects tested and guaranteed from 0°C to 70°C relative to 25°C. All specifications shown are relative to 25°C. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. Change after one year or 1 million pressure cycles. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. Test are in accordance with EN50082-2, Jan. 93. ELECTROMAGNETIC CAPABILITY 8 Test conditions Interference Radiated, radio frequency electromagnetic field immunity (RFI) IEC801-3: Grade 3 10V/m, 1MHz to 1000 MHz unmodulated and 80% modulated <1% FSO Electrical fast transient/burst immunity (EFT) IEC 801-4: Grade 3 ±2 kV <1% FSO Electrostatic discharge immunity (ESD) IEC 801-2: Grade 3 ±8 kV, contact discharge <1% FSO January 1998/102 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE6000 - Series Precision stainless steel pressure transmitters OUTPUT CHARACTERISTICS 0 - 10 V output version 1 - 6 V output version 4 - 20 mA output version 0 - 20 mA output version LOAD LIMITATION Recommended plug (DIN43650A) 0 - 20 mA output version 4 - 20 mA output version Plug and profile washer included in delivery ! Dimensions in mm January 1998/102 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE6000 - Series Precision stainless steel pressure transmitters ELECTRICAL CONNECTION 0 - 20 mA output version OUTLINE DRAWING BTE6... (up to 16 bar devices) Mass: typ. 190g OUTLINE DRAWING BTE6... (for devices from 35 bar to 350 bar) Mass: typ. 280g OUTLINE DRAWING Mass: typ. 190g BTE6...-FL All Dimensions in mm January 1998/102 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com BTE6000 - Series Precision stainless steel pressure transmitters ORDERING INFORMATION 1 Operating pressure 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - 10 V output /2" manometer flush mount thread to 1 bar absolute to 2 bar absolute to 5 bar absolute to 10 bar absolute to 16 bar absolute to 35 bar absolute to 70 bar absolute to 350 bar absolute to 35 bar sealed gage to 70 bar sealed gage to 350 bar sealed gage to 1 bar gage to -1 bar gage to ±1 bar gage to 2 bar gage to 5 bar gage to 10 bar gage to 16 bar gage BTE6001A0 BTE6002A0 BTE6005A0 BTE6010A0 BTE6016A0 BTE6035A0 BTE6070A0 BTE6350A0 BTE6035G0 BTE6070G0 BTE6350G0 BTE6001G0 BTE6P01G0 BTE6N01G0 BTE6002G0 BTE6005G0 BTE6010G0 BTE6016G0 BTE6001A0-FL BTE6002A0-FL BTE6005A0-FL BTE6010A0-FL BTE6016A0-FL ------------BTE6001G0-FL BTE6P01G0-FL BTE6N01G0-FL BTE6002G0-FL BTE6005G0-FL BTE6010G0-FL BTE6016G0-FL 4 - 20 mA output /2" manometer flush mount thread 1 Operating pressure 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 to 1 bar absolute to 2 bar absolute to 5 bar absolute to 10 bar absolute to 16 bar absolute to 35 bar absolute to 70 bar absolute to 350 bar absolute to 35 bar sealed gage to 70 bar sealed gage to 350 bar sealed gage to 1 bar gage to -1 bar gage to ±1 bar gage to 2 bar gage to 5 bar gage to 10 bar gage to 16 bar gage BTE6001A4 BTE6002A4 BTE6005A4 BTE6010A4 BTE6016A4 BTE6035A4 BTE6070A4 BTE6350A4 BTE6035G4 BTE6070G4 BTE6350G4 BTE6001G4 BTE6P01G4 BTE6N01G4 BTE6002G4 BTE6005G4 BTE6010G4 BTE6016G4 1 BTE6001A4-FL BTE6002A4-FL BTE6005A4-FL BTE6010A4-FL BTE6016A4-FL ------------BTE6001G4-FL BTE6P01G4-FL BTE6N01G4-FL BTE6002G4-FL BTE6005G4-FL BTE6010G4-FL BTE6016G4-FL 1 - 6 V output /2" manometer flush mount thread BTE6001A1 BTE6002A1 BTE6005A1 BTE6010A1 BTE6016A1 BTE6035A1 BTE6070A1 BTE6350A1 BTE6035G1 BTE6070G1 BTE6350G1 BTE6001G1 BTE6P01G1 BTE6N01G1 BTE6002G1 BTE6005G1 BTE6010G1 BTE6016G1 1 BTE6001A1-FL BTE6002A1-FL BTE6005A1-FL BTE6010A1-FL BTE6016A1-FL ------------BTE6001G1-FL BTE6P01G1-FL BTE6N01G1-FL BTE6002G1-FL BTE6005G1-FL BTE6010G1-FL BTE6016G1-FL 0 - 20 mA output /2" manometer flush mount thread BTE6001A5 BTE6002A5 BTE6005A5 BTE6010A5 BTE6016A5 BTE6035A5 BTE6070A5 BTE6350A5 BTE6035G5 BTE6070G5 BTE6350G5 BTE6001G5 BTE6P01G5 BTE6N01G5 BTE6002G5 BTE6005G5 BTE6010G5 BTE6016G5 BTE6001A5-FL BTE6002A5-FL BTE6005A5-FL BTE6010A5-FL BTE6016A5-FL ------------BTE6001G5-FL BTE6P01G5-FL BTE6N01G5-FL BTE6002G5-FL BTE6005G5-FL BTE6010G5-FL BTE6016G5-FL Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. January 1998/102 Aubinger Weg 27, 82178 Puchheim, Germany Phone 0049 - (0) 89 80 08 30, Fax 0049 - (0) 89 8 00 83 33 http://www.sensortechnics.com