Bussmann® 5 x 20mm Ferrule Fuses GMA GMA-V Fast-Acting 4A 5A 6A 2.5A 1A 5.54mm (±.20) 3A Time-Current Characteristic Curves–Average Melt 1.25A 2A 38.10mm (±.38) 1.5A Dimensional Data 100 10mm 20mm (±2.0) (±0.5) 21.10mm (±.81) 5.2mm (+0.1/-0.2) 38.10mm (±.38) AMPERE RATING 10 Glass tube - end caps: nickel or silver-plated brass. CATALOG SYMBOL: GMA FAST-ACTING 63mA - 6A UL LISTED, STD. 248-14 (GUIDE # JDYX, FILE E75865) 7A - 15A UL RECOGNIZED (GUIDE # JDYX2, FILE E75865) TIME IN SECONDS .81 (REF) 1 .1 Limits for Pre-arcing Time 2 min. — 2 min. 1.1 In: Æt ² 70°C, 63mA - 10A. .01 1.0 In: Æt ² 70°C, 15A. CURRENT IN AMPERES Packaging & Ordering Information: Product Symbol Lead 200 60 min. 15A 100 63mA - 10A 10 2.0 In MAX 1 1.35 In MAX .4 In Ampere Rating Package Code Blank (None) V Axial Leads .032 x 1.5” Copper Tinned GMA Markings: MFG mark, Rated Current, Rated Voltage, Product Symbol, Approvals where Applicable. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. 12-18-98 SB98107 Rev. A Form No. GMA Page 1 of 2 BIF Doc #2017 Bussmann® 5 x 20mm Ferrule Fuses GMA GMA-V Fast-Acting 35A/250V AC 10kA/125V AC p.f. = 0.7 - 0.8 250 100A/250V AC 10kA/125V AC p.f. = 0.7 - 0.8 10kA/125V AC p.f. = 0.7 - 0.8 125 200A/125V AC p.f. = 1.0 150A/125V AC p.f. = 1.0 Voltage Drop (mV) max. 4700 4300 2600 3400 2200 470 450 230 200 200 180 300 290 290 270 260 250 240 215 210 210 205 200 180 110 110 110 100 Pre-arcing Value (I2t) (A2s) typ. 0.00024 0.0001 0.0024 0.001 0.018 0.019 0.019 0.15 0.32 0.47 0.70 0.48 0.78 0.84 1.6 2.0 3.1 4.9 8.8 9.7 13 19 29 45 150 280 280 950 • • • • • • • • • • • • • • • • • • • • • • • • JIS Breaking Capacity CSA Rated Voltage (V AC) U.R. Current Rating (In) 63mA 100mA 125mA 200mA 250mA 300mA 315mA 500mA 600mA 750mA 800mA 1A 1.2A 1.25A 1.5A 1.6A 2A 2.5A 3A 3.15A 3.5A 4A 5A 6A 7A 8A 10A 15A U.L. Electrical Characteristics • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 12-18-98 SB98107 Rev. A Form No. GMA Page 2 of 2 BIF Doc #2017