MUR3040 Preferred Device SWITCHMODE Power Rectifier . . . designed for use in switching power supplies, inverters and as free wheeling diodes, these state–of–the–art devices have the following features: • • • • • http://onsemi.com Ultrafast 100 Nanosecond Recovery Time 175°C Operating Junction Temperature High Voltage Capability to 400 Volts Low Forward Voltage Drop High Temperature Glass Passivated Junction ULTRAFAST RECTIFIER 30 AMPERES 400 VOLTS Mechanical Characteristics • Case: Epoxy, Molded • Weight: 4.3 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal 1 4 3 Leads are Readily Solderable • Lead Temperature for Soldering Purposes: • • 4 260°C Max. for 10 Seconds Shipped 30 Units Per Plastic Tube Marking: U3040 MAXIMUM RATINGS Rating Symbol Max Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 400 V Average Rectified Forward Current TC = 70°C IF(AV) 30 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 150°C) IFRM 30 A Non–Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 300 A TJ, Tstg –65 to +175 °C Operating Junction and Storage Temperature Range 1 3 TO–218 CASE 340E STYLE 1 MARKING DIAGRAM U3040 U3040 = Device Code ORDERING INFORMATION Device MUR3040 Package Shipping TO–218 30 Units/Rail Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 – Rev. 4 1 Publication Order Number: MUR3040/D MUR3040 THERMAL CHARACTERISTICS Rating Thermal Resistance, Junction to Case Symbol Max Unit RθJC 1.0 °C/W ELECTRICAL CHARACTERISTICS Instantaneous Forward Voltage (Note 1.) @ IF = 30 Amps, TC = 100°C @ IF = 30 Amps, TC = 25°C VF Instantaneous Reverse Current (Note 1.) @ Rated dc Voltage, TC = 100°C @ Rated dc Voltage, TC = 25°C IR Reverse Recovery Time IF = 1.0 Amp, dI/dt = 15 Amp/µs tRR Volts 1.4 1.5 6.0 35 mA µA 100 ns 1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0% TYPICAL ELECTRICAL CHARACTERISTICS 150°C 1000 100°C I R, REVERSE CURRENT (µ AMPS) i F, FORWARD CURRENT (AMPS) 100 25°C 10 1 0.1 0.1 0.3 0.5 0.7 0.9 1.1 1.3 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) TJ = 150°C 100 100°C 10 25°C 1 0.1 0.01 50 1.5 Figure 1. Typical Forward Voltage 400 4 30 i F, FORWARD CURRENT (AMPS) i F, FORWARD CURRENT (AMPS) 350 Figure 2. Typical Reverse Current 35 25 20 dc 15 10 5 0 140 150 250 200 300 VR, REVERSE VOLTAGE (VOLTS) 100 150 160 170 TC, CASE TEMPERATURE (°C) 3 2 dc 1 IN FREE AIR WITH NO HEATSINK 0 180 0 Figure 3. Current Derating, Case 20 40 60 80 100 120 140 160 TA, AMBIENT TEMPERATURE (°C) 180 200 Figure 4. Current Derating, Ambient http://onsemi.com 2 MUR3040 PACKAGE DIMENSIONS TO–218 TWO LEAD TO–218 CASE 340E–02 ISSUE A B C Q E 4 U DIM A B C D E G H J K L Q S U V A S L 1 K 2 3 D V G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982 2. CONTROLLING DIMENSION: MILLIMETER. J H http://onsemi.com 3 MILLIMETERS MIN MAX --20.35 14.70 15.20 4.70 4.90 1.10 1.30 1.17 1.37 10.80 11.10 2.00 3.00 0.50 0.78 31.00 REF --16.20 4.00 4.10 17.80 18.20 4.00 REF 1.75 REF STYLE 1: PIN 1. CATHODE 3. ANODE 4. CATHODE INCHES MIN MAX --0.801 0.579 0.598 0.185 0.193 0.043 0.051 0.046 0.054 0.425 0.437 0.079 0.118 0.020 0.031 1.220 REF --0.638 0.158 0.161 0.701 0.717 0.157 REF 0.069 MUR3040 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada Email: [email protected] Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada N. American Technical Support: 800–282–9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor – European Support German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET) Email: ONlit–[email protected] French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET) Email: ONlit–[email protected] English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT) Email: [email protected] CENTRAL/SOUTH AMERICA: Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST) Email: ONlit–[email protected] Toll–Free from Mexico: Dial 01–800–288–2872 for Access – then Dial 866–297–9322 ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001–800–4422–3781 Email: ONlit–[email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031 Phone: 81–3–5740–2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MUR3040/D