ETC PS-320

PS-320
300 Watt Enclosed Switching Power Supply
Description:
These enclosed AC to DC switching power supplies provide a practical, reliable, simple,
compact & light weight power source for a variety of applications including motors,
controllers, automation, robotics & motion control. The PS-320 has two versions
available, 24V & 48V (adjustable from 41V to 56V). Both are mechanically identical.
Each PS-320 provides a single 1% regulated DC output from zero to the maximum load
of 300 Watts. Over voltage, current limit, short circuit & over temperature protection are
built in. There are no internal fuses. If the current limit is exceeded, the supply shuts
down & attempts to automatically restart. AC power does not need to be removed to
recover from an over current condition. They can not be damaged by shorting the
outputs. Operation from either 110V or 220V AC line input voltage can be selected with
a single switch.
The PS-320 is UL certified to verify safe reliable operation. No additional cooling or heat
sinking is necessary due to their high efficiency. They operate up to full load in an ambient
environment from 0 to 50°C (32 to 122°F) without de-rating, and over a wider
temperature range with some de-rating.
Features:
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Ø
Low cost, high reliability
Automatic internal cooling fan
International AC input range
DC adjustable voltage
High efficiency, low working temperature
Short circuit & overload protected
Overvoltage protected
Overtemperature protected
Compact size, light weight
100% full load burn-in test
DIN-rail mounting option
Built-in EMI filter, low ripple noise
UL 1950 approved
US Digital warrants its products against defects in materials
& workmanship for two years. See complete warranty for
details.
Mechanical Specifications:
phone: 360.260.2468 l sales: 800.736.0194 l fax: 360.260.2469
email: [email protected] l website: www.usdigital.com
11100 ne 34th circle l vancouver, washington 98682 USA
page
1
PS-320
300 Watt Enclosed Switching Power Supply
Electrical Specifications:
Specification
DC Output Voltage
Ouput Voltage Tolerance
Output Rated Current
Output Current Range
Ripple & Noise
Line Regulation
Load Regulation
DC Output Power
Efficiency
DC Voltage Adj.
Over Voltage Protection
PS-320-24
24V
±1%
12.5A
0-12.5A
150mVp-p
±0.5%
±0.5%
300W
86%
20-26.4V
27-32.4V
PS-320-48
48V
±1%
6.5A
0-6.5A
240mVp-p
±0.5%
±0.5%
312W
87%
41-56V
57.6-67V
Specifications: (24V & 48V)
AC Line Input Voltage Range
110V switch setting
220V switch setting
AC line input frequency
Temp. Coefficient (volts)
Vibration
Withstand Voltage
Isolation Resistance
Working Temperature
Working Humidity
Storage Temp., Humidity
AC Line Input True RMS Current
@ full load
AC Line Inrush Current
AC Leakage Current
Overload Protection
Setup, Rise, Hold Up Time
Dimension
Weight
Safety Standard
88~132 VAC
176~264 VAC
47-63Hz
±0.03% / °C (0~50°C)
10~500 Hz, 2G 10min./1 cycle, Period for 60 min.
each axis
Input to Output = 3KVAC
Input to Frameground = 1.5KVAC
Output to Frameground = 500VAC
Input to Output = 500VDC / 100 meg Ohm
Input to Frameground = 500VDC / 100 meg Ohm
Output to Frameground = 500VDC / 100 meg Ohm
0~50°C @ 100% (refer to output derating curve)
10%~95% RH
-20°C~+85°C, 10%~95% RH
3A @ 115V
1.51A @ 230V
(power factor = 68%)
20A @ 115V
40A @ 230V
<3.5mA @ 240VAC
105~135% Type: Pulsing hiccup shutdown.
auto recovery reset.
2s, 20ms, 20ms
9.06" x 4.53" x 1.97"
2.53 lbs.
UL1950 Approved
Block Diagram:
AC Line
Input
Frame
Ground
EMI
Filter
Output Derating
100
80
60
40
20
0
-10
0
10
Fan
On/Off
Control
Active Inrush
Current Limiting
Rectifieres
Power
Switching
20
30
40
Ambient Temperature (°C)
50
60
Fan
Rectifiers
& Filter
+V
-V
Detection
Circuit
Overload
Protection
PWM
Control
Overload
Protection
Overtemperature
Protection
phone: 360.260.2468 l sales: 800.736.0194 l fax: 360.260.2469
email: [email protected] l website: www.usdigital.com
11100 ne 34th circle l vancouver, washington 98682 USA
page
2
PS-320
300 Watt Enclosed Switching Power Supply
PS-MK-B:
Price:
Description: Din-rail bottom plate mounting kit.
$5.00
2 M4 x 6
flat head screws
3 M3 x 6
pan head screws
PS-MK-B Includes:
Ø
Ø
Ø
Ø
1
1
3
2
PS-MK-L:
Price:
Description: Din-rail L-bracket mounting kit (horizontal).
$5.00
mounting plate.
Din-rail clip.
M3 x 6 phillips pan head screws.
M4 x 6 phillips flat head screws.
PS-MK-E:
Price:
$5.00
Description: Ear mounting kit.
Description: Din-rail L-bracket mounting kit (vertical).
PS-MK-E Specifications:
PS-MK-L Includes:
Ø
Ø
Ø
PS-MK-E Includes:
Ø
Ø
4 mounting ears.
4 M4 x 6 phillips pan head screws.
Ordering Information:
Price:
$169 / 1
$159 / 10
$149 / 50
$139 / 100
1 Din-rail clip.
1 L-bracket.
6 M4 x 6 phillips pan head screws.
Technical Data, Rev. 10.02.00, October 2000
All Information subject to change without notice.
PS-320 Voltage:
24 = 24VDC
48 = 48VDC*
Note:
The above mounting kits
must be purchased separately.
*adjustable from 41V to 56V.
phone: 360.260.2468 l sales: 800.736.0194 l fax: 360.260.2469
email: [email protected] l website: www.usdigital.com
11100 ne 34th circle l vancouver, washington 98682 USA
page
3