Catalog 82276 Revised 7-99 ••••••••••••••• PRO-CRIMPER II Hand Tool Product Facts ■ Ratchet control provides complete crimping cycle ■ Emergency ratchet release ■ Angled head provides a comfortable hand and wrist position ■ One tool with over 75 interchangeable die sets can crimp many different types of connectors ■ Accommodates multiple terminal sizes in one die set ■ Precision construction of durable high-carbon steel ■ Extra strength pivot pins provide greater durability ■ Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request. 1 ISO900ied tif Cer 99182 Technical Documents Instruction Sheets P/N IS 408- P/N IS 408- 58433-1 58433-2 58433-3 58433-4 58448-2 58495-1 58499-1 58500-1 58501-1 58506-3 58514-1 58517-1 58519-1 58524-1 58525-1 58529-1 58530-1 58531-1 58531-2 58541-1 58546-1 58548-1 58551-1 58558-1 58559-1 58560-1 58564-1 58583-1 58621-1 58622-1 58628-1 9140 9159 9252 9671 9357 9819 9830 9877 9876 2835 9973 4064 9917 9993 9994 9999 4005 9657 9657 4051 4047 4031 4090 4091 4116 4093 4075 4165 4273 4291 4452 58630-1 58663-1 90546-1 90547-1 90548-1 90574-1 90575-1 90683-1 90684-1 90758-1 90759-1 90760-1 90800-1 90869-1 90870-1 90871-1 90872-1 217211-1 217212-1 224933-1 318450-1 318451-1 318452-1 354940-1 492623-1 492782-1 503568-1 503699-1 503911-1 679304-1 4453 4476 9883 9884 9885 9886 9887 9935 9934 9938 9962 9963 4007 9964 9965 9966 9967 4113 4145 4160 4218 4217 4219 9930 4457 4471 9860 4066 4159 4070 The PRO-CRIMPER II Hand Tool provides the versatility of general-purpose service tools along with the reliability and ease of use of many premium-grade tools. For versatility, all 75 die sets are interchangeable, including those for open-barrel contacts and terminals. Additionally, many of these die sets have multiple cavities for crimping a variety of contact or terminal sizes. For reliability, the tool is constructed of durable highcarbon steel with extrastrength pivot pins. And, for user convenience, the PRO-CRIMPER II Hand Tool particularly excels. Ratchet control is provided for complete crimp cycling; this helps eliminate partial crimps. Also, an emergency ratchet release allows the user to open the tool jaws at any time during the crimp cycle. To reduce handle force, the linkage was designed to match the forces required to crimp our largest insulated terminal. The result is dramatically less hand force than comparable tools. Also, the angled head and specially designed handles reduce hand stretch and provide comfortable operation. Locators are mounted on pin-and-socket style tools. They help properly locate the contact in the die set, provide a wire stop, and help minimize contact rotation and bending during crimping. The PRO-CRIMPER II Hand Tool is ideally suited for R&D prototyping, networking applications, and commercial, industrial, and institutional maintenance work. Need more information? For information specifically about tooling, call the AMP Tooling Assistance Center at 1-800-722-1111. © 1990 through 1996, 1998 and 1999 by AMP Incorporated. All Rights Reserved. AMP, AMPLIMITE, AMPSEAL, AMP SUPERSEAL 1.5 SERIES, DUALAN, FASTON, FSD, INFOPORT, LightCrimp, MATE-N-LOK, PIDG, PLASTI-GRIP, PRO-CRIMPER, RSD and SOLISTRAND are trademarks. Belden is a trademark of Belden Wire and Cable of Cooper Industries. ST-Trademark of American Telephone & Telegraph Co. NTT-FC-Trademark of NTT Advanced Technology Corp. NEC-D4-Trademark of Nippon Electric Co. Ltd. MONTROSE-Trademark of MONTROSE Products Co. 1 www.amp.com/tooling For drawings or technical data, contact your AMP sales engineer or call the AMP Tooling Assistance Center: 1-800-722-1111. Dimensions are in inches and millimeters unless specified otherwise. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. Catalog 82276 Revised 7-99 ••••••••••••••• PRO-CRIMPER II Hand Tool Connector/Terminal-to-Tool Reference Product Family Catalog Number1 AMP® Product RG/U Cable2 or Wire Size Termination Type/Style Part Number Tool Frame P/N 354940-1 Die Set Only with Die Set RD 316, 180, 195, Belden 8218 “O”/Commercial — “O”/Commercial 58433-1 Hex/Commercial 58433-2 Belden 9248, 9114 “O”/Commercial — 174, 188, 316, 179, 161, 187 “O”/Commercial 318450-1 62, 59 “O”/Commercial — Belden 9907, 89907, Comm/Scope 2104 “O”/Commercial 318452-1 174, 188, 316, 179, 161, 187 Hex/Commercial — 62, 59, Belden 9104, 9112 “O”/Commercial & Military — Hex/Commercial — Belden 8281, 9141 “O”/Commercial & Military — 180, 195, Belden 8218, 9248, 9114 “O”/Commercial — 58 “O”/Military — 62, 59 “O”/Commercial — 6, Belden 8281 “O”/Commercial — “O”/Commercial 318451-1 179, 161, 187 Hex/Commercial 58531-2 62, 59 Hex/Commercial 58531-1 Double Braid 59, Belden 8281, 9141 Hex/Commercial 58531-3 Belden 9248, 9114 “O”/Commercial — Belden 8218 “O”/Commercial — 6, Belden 8281 “O”/Commercial — 58, 62, 59 Hex/Commercial 58433-2 8, 213, 11, 216, 9, 214 Hex/Commercial 58501-1 58 Dual Crimp 58506-3 Hex/Commercial 58500-1 174, 316, 188, 179, 161, 187, RD 316, 188 Double Braid Hex/Military 58499-1 178, 196, 174, 316, 188, 179, 161, 187 Hex/Commercial — 58, 62, 59 “F” / “O” 58558-1 174, 316, 188, 179, 161, 187 “F” / “O” 58559-1 58, 62, 59 50 Ohm BNC and TNC 50 Ohm BNC 75 Ohm BNC and TNC Coaxial Connectors 75 Ohm BNC 82074 50 and 75 Ohm BNC 50 Ohm N Miniature UHF 50 Ohm SMB 50 and 75 Ohm Consumer BNC Series F CATV Plugs Braid-Pic Braid Termination Terminals and Splices 58, 6, 7 .259, .324, .384 [6.6, 8.2, 9.8] Dia. Hex/Commercial 58621-1 58621-2 59, 6, 7 .290, .343 [7.4, 8.7] Dia. Hex/Commercial 58622-1 58622-2 59, 6 .360 [9.1] Dia. Hex/Commercial 58663-1 58663-2 — — 220195-1 — 58433-33 58423-13 — 58546-1 58545-1 — 217212-1 217212-2 82042 Insulated Terminals and Splices (PIDG and PLASTI-GRIP) 58, 62, 59 22-16 AWG [0.3-1.3 mm2] 16-14 AWG [1.3-2.0 mm2] 12-10 AWG [3.0-5.0 mm2] 65505 Uninsulated Terminals and Splices (SOLISTRAND) 22-10 AWG [0.3-5.0 mm2] mm2] Spare Wire Caps ECV-ECN 18-16 AWG [0.8-1.3 ECN 18-10 AWG [0.8-5.0 mm2] ECV-ECN 18-10 AWG [0.8-5.0 mm2] .048-.225 [1.22-5.72] Ins. Dia. — 58573-1 — FASTON 250 Series Recpt. 18-14 AWG [0.8-2.0 mm2] 14-10 AWG [2.0-5.0 mm2] — — 58524-1 58525-1 58524-2 58525-2 26-14 AWG [0.13-2.0 mm2] — 58628-1 58628-2 12-10 AWG [3.0-5.0 mm2] — 58630-1 58630-2 Closed End Splices 65472 Receptacles and Tabs .110/.125 Recpt. Ultra-Fast .187/.250 Recpt., FASTON .250 Tabs (Straight) .250 Recpt. 82004 1 Request catalog for detailed product information. Coaxial cable of similar size can be crimped. Request Catalog 82074 for a complete listing of possible cable sizes. 3 Not for use with PIDG FASTON receptacles; crimp not approved by UL or CSA. 2 2 www.amp.com/tooling 58539-1 58435-1 58436-1 58539-1 318450-2 58435-1 318452-2 58436-3 58537-1 58436-2 58538-1 58539-1 220189-3 58536-1 58538-1 318451-2 58425-2 58425-1 58425-3 58536-1 58174-1 58538-1 58436-1 58485-1 220196-1 58489-1 58483-1 58046-1 58558-2 58559-2 For drawings or technical data, contact your AMP sales engineer or call the AMP Tooling Assistance Center: 1-800-722-1111. Dimensions are in inches and millimeters unless specified otherwise. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. Catalog 82276 Revised 7-99 ••••••••••••••• PRO-CRIMPER II Hand Tool Connector/Terminal-to-Tool Reference (Continued) Product Family Catalog Number1 Cable or Wire Size AMP® Product FSMA and ST-Style (S.S.) Connectors (504XXX Series only) ST-Style, FC Type, D4 and Connectors Fiber Optic Connectors 82164 and 296355 1307099 — AMP® SC 58552-1 3.0 mm Jacket Dia. 58433-4* 58424-1 3.8 mm Jacket Dia. — 3.0 mm Jacket Dia. 503911-1** 503910-1 FSD, FSD MC and RSD Connectors; FSD Breakout Kit DUALAN and LDD 58519-1* 58510-1 LightCrimp XTC Connectors (Ceramic/Polymer/S.S.) 3.0 mm Jacket Dia. 503568-1* 503567-1 503699-1* 492623-1*** 492782-1*** 217211-1 503698-1 492622-1 492783-1 217211-2 LightCrimp SC (Ceramic) Connectors ST-Style LightCrimp Plus AMP® SC Multimate Contacts 3.0 mm Jacket Dia. 3.0 mm Jacket Dia. 3.0 mm Jacket Dia. 1 mm Plastic Fiber, 2.2 mm Jacket Dia. 28-24 AWG [0.08-0.2 mm2] 24-20 AWG [0.2-0.6 mm2] 58448-3 90800-2 Type II Pin and Socket Contacts 24-14 AWG [0.2-2.0 mm2] 28-24 AWG [0.08-0.2 mm2] 24-20 AWG [0.2-0.6 mm2] 18-16 AWG [0.8-1.4 mm2] 24-18 AWG [0.2-0.9 mm2] 20-14 AWG [0.6-2.0 mm2] 30-24 AWG [0.05-0.2 mm2] 24-18 AWG [0.2-0.9 mm2] 26-18 AWG [0.13-0.9 mm2] 24-18 AWG [0.2-0.9 mm2] 58541-1 58541-2 58495-1 58495-2 90872-1 90871-1 90870-1 90869-1 58514-1 90548-1 90872-2 90871-2 90870-2 90869-2 58514-2 90548-2 20-14 AWG [0.6-2.0 mm2] .060-.130 [1.52-3.30] Ins. Dia. 90546-1 90546-2 20-14 AWG [0.6-2.0 mm2] .130-.200 [3.30-5.08] Ins. Dia. 90547-1 90547-2 58530-1 90758-1 90759-1 90760-1 90574-1 90575-1 90683-1 90684-1 58517-1 58529-1 58583-1 58548-1 58564-1 58560-1 — 224933-1 58530-2 90758-2 90759-2 90760-2 90574-2 90575-2 90683-2 90684-2 58517-2 58529-2 58583-2 — — 58560-2 852681-1 224933-2 MR Pin and Socket Contacts Universal MATE-N-LOK II and Universal MATE-N-LOK Pin and Socket Contacts 82181 — Dynamic Series D-3 Contacts — 12-10 AWG [3-5 mm2] 26-22 AWG [0.13-0.3 mm2] 22-18 AWG [0.3-0.9 mm2] or Two 22 AWG 20-16 AWG [0.6-1.4 mm2] or Two 20 AWG 24-18 AWG [0.2-0.9 mm2] 20-14 AWG [0.6-2.0 mm2] 24-20 AWG [0.2-0.56 mm2] 20-16 AWG [0.5-1.42 mm2] 26-22 AWG [0.13-0.3 mm2] 20-16 AWG [0.5-1.25 mm2] 0.5-1.5 mm2 26-20 AWG [0.13-0.6 mm2] 26-16 AWG [0.13-1.4 mm2] 28-24 AWG [0.08-0.2 mm2]✝ .200 [5.08] Max. Ins. Dia. .135-.150 [3.43-3.81] Ins. Dia. Type 1, 2, 6, 9 and MONTROSE Mini-Universal MATE-N-LOK Pin and Socket Contacts Commercial MATE-N-LOK Pin and Socket Contacts PC Card Connectors 65701 CST-100 Contacts AMPSEAL Automotive Receptacles AMP SUPERSEAL 1.5 SERIES Contacts EI Series Receptacle Contacts Universal Power Contacts Modular Plugs (10 Pos.) Modular Plug Strain Relief INFOPORT Series III Shield Kit Universal Data Connector Kits 82164 AMP® Crimp Ring 82066 58448-2 90800-1 .062 Soft Shell Commercial Pin and Socket Contacts 124962 503890-1 28-22 AWG [0.08-0.3 mm2] Pin and Socket Connectors 65481 * D-Subminiature 22 DF Pin and Socket Contacts (AMPLIMITE) .093 Soft Shell Commercial Pin and Socket Contacts Modular Plugs 58551-1* ST-Style (Ceramic) Connectors Type III+ and Type VI Pin and Socket Contacts Receptacle and Tab Connectors 3.0 mm Jacket Dia. FC Type and AMP® SC Connectors (Next Generation) D-Subminiature 20 DF Pin and Socket Contacts (AMPLIMITE) 82068 Part Number Tool Frame P/N 354940-1 Die Set Only with Die Set — 58450-1 1 Request catalog for detailed product information. Terminates cable with 24 AWG [0.2 mm2] conductors with .039 [0.99] Max. O.D. * Tool Frame Part No. 58532-1. ** Tool Frame Part No. 58588-1. *** Tool Frame Part No. 58532-2. ✝ 3 www.amp.com/tooling For drawings or technical data, contact your AMP sales engineer or call the AMP Tooling Assistance Center: 1-800-722-1111. Dimensions are in inches and millimeters unless specified otherwise. Values in brackets are metric equivalents. Specifications subject to change. Consult AMP for latest specifications. Catalog 82276 Revised 7-99 ••••••••••••••• PRO-CRIMPER II Hand Tool PRO-CRIMPER II Hand Tool PIDG and PLASTI-GRIP Terminal Kit No. 55823-1 PRO-CRIMPER II Hand Tool BNC Premises Wiring Kit No. 58477-1 Includes hand tool (Part No. 58433-3), 225 insulated ring and spade terminals in 1210, 16-14 and 22-16 AWG [3.0-5.0, 1.3-2.0 and 0.31.3 mm2] wire sizes. Includes hand tool (Part No. 58433-1), plugs—5 RG-58, 10 RG-59/62, 5 RG-58 plenum and RG-59/62 plenum sizes; adapters— 2 jack-to-jack and 2 “T”. PRO-CRIMPER II Hand Tool Repair Kit No. 679221-1 Head Assembly for PRO-CRIMPER II Die Sets Part No. 679304-1 Includes retaining rings, handle return spring, pawl spring, pivot pins, pawl pin, ratchet pawl, die pins, nut and die set screws. 93172 Carrying Case (Empty) Part No. 679223-1 Includes two empty storage boxes for die sets. For use with 626 Pneumatic Tool System. Request Catalog 124208 for a listing of available Power Unit options. 86868 Accessories 93504 95372 Hand Tool Kits Wire and Cable Strippers Instruction Sheet 408-9686 Overall Length — 8 [200] ■ 22-12 AWG [0.3-3 mm2] (Stripping Jaws P/N 1-601827-2) Instruction Sheet 408-9688 [Note: One replacement blade (Part No. 606701-1) is inside the handle of every new stripper.] Overall Length — 5.5 [140] Coaxial Cable Stripper 103005 ■ Strips cable diameters up to 1 [25.4] ■ Blade depth adjustable ■ Blade angle changeable For Use with Connector Type Strip Style Part Number BNC Single Crimp BNC Commercial and UHF Mini UHF Standard BNC Mil-Type Dual Crimp BNC Commercial Dual Crimp 2-step 2-step 2-step 3-step 3-step 603995-1 603995-2 603995-3 603995-5 603995-6 Instruction Sheet 408-2766 Overall Length — 3.5 [90] ■ Cable diameters from .10-.30 [2.54-7.62] ■ Includes interchangeable, colorcoded blade cassette, four “V” blocks and a hex key Printed on recycled paper. 82276—5M—ASG—NVO—7-99—T12—0151 Printed in U.S.A. AMP Incorporated, Harrisburg, PA 17105; Phone: 717-564-0100; TAC fax: 717-810-2310; Internet: http://www.amp.com/tooling 4 A !@#$ INTERNATIONAL LTD. COMPANY 47008 Cable Stripper Part No. 606700-1 96526 Wire Stripper Part No. 601827-2