FWF 125 F Quick-acting; FWT 125 TTime-lag, Fuse with Radial Leads NEW UL 248-14 CSA C22.2 No. 248-14 Pre-arcing time/current Characteristic temps (at Ta 23 ºC) Approvals: c-UL-us recognition 50mA – 6.3A File #E41599 n • In 1 • In 2 • In 2 • In rated current In FWF 125 F 50mA – 6.3A > 4 h* < 60 s < 5 s FWT 125 T 50mA – 6.3A >4h < 60 s * Non fusing current lnf FWF 125 F FWT 125 T Pre-arcing time in seconds ts Pre-arcing time in seconds ts A = body height 8 mm, max. tolerance B = body width 8.5 mm, max. tolerance C = body thickness 4 mm, max. tolerance d = lead wire diameter 0.6 mm, +0.06 / -0.05 tolerance P = pitch of component 12.7 mm, ±1 tolerance P0 = feed hole pitch 12.7 mm, ±0.2 tolerance P1 = hole center to lead 3.85 mm, ±0.7 tolerance P2 = feed hole center to component center 6.35 mm, ±0.4 tolerance F = lead-lead distance 5 mm, +0.4 / -0.1 tolerance h = component alignment 0, ±1 tolerance W = tape width 18 mm, ±0.5 tolerance W0= hold-down tape width 6 mm, min. tolerance W1= hole position 9 mm, ±0.5 tolerance W2= hold-down tape position 0.5 mm, max. tolerance H = height of component from tape center 18.5 mm, ±0.5 tolerance H0 = lead-wire clinch height H1 = component height 32.2 mm, max. tolerance D0 = feed hole diameter 4 mm, ±0.2 tolerance t = total tape thickness 0.7 mm, ±0.2 tolerance I = length of snipped leads 11 mm, max. tolerance Multiple of rated current In Multiple of rated current In Technical Data -25˚C to +60˚C 10 to 60 Hz constant amplitude of 1.5mm; 60 to 2000 Hz constant acceleration of 100 m/s2 (10g); 24 cycles of 15 minutes according to IEC 60068-6 25 / 70 / 21 according to EN 60068-1...3 260˚C < 3 sec. Warebath) / 350˚C < 1 sec.(soldering iron) 260˚C / 10 sec. according to IEC 60068-2, Part 20 temperature resistant plastic (UL 94V-0) copper, tin-plated Ambient temperature max. Ta Vibration resistance Climatic category Solderability (reflow and wave soldering) Soldering heat resistance Material: Housing Terminals FWF 125 F Quick acting Rated current / Breaking Capacity rated voltage Order Numbers 0034.7401 0034.7402 0034.7403 0034.7404 0034.7405 0034.7406 0034.7407 0034.7408 0034.7409 0034.7410 0034.7411 0034.7412 0034.7413 0034.7414 0034.7415 0034.7416 0034.7417 0034.7418 0034.7419 0034.7420 0034.7421 0034.7422 mA / A / V ~ 50 mA / 125V 63 mA / 125V 80 mA / 125V 100 mA / 125V 125 mA / 125V 160 mA / 125V 200 mA / 125V 250 mA / 125V 315 mA / 125V 400 mA / 125V 500 mA / 125V 630 mA / 125V 800 mA / 125V 1 A / 125V 1.25 A / 125V 1.6 A / 125V 2 A / 125V 2.5 A / 125V 3.15 A / 125V 4 A / 125V 5 A / 125V 6.3 A / 125V 140 A~ ac / dc 100A / 125V AC p.f. = 1 Volt. drop Sustained Pre-arcing @ In Power diss. I2t at 10 • In @1 • In max. mV 1600 1300 1200 1100 1350 1000 950 900 800 230 220 210 200 190 180 170 160 150 140 130 120 115 max. mW 85 85 100 110 160 150 210 225 255 95 110 135 160 190 225 275 450 375 445 520 600 850 max. A2s 0.0001 0.00013 0.0002 0.0013 0.0019 0.0037 0.0075 0.013 0.026 0.015 0.022 0.038 0.068 0.1 0.2 0.39 0.53 1.2 1.9 3.2 6.1 9.7 FWT 125 T Time-lag Rated current / rated voltage Order Numbers 0034.7501 0034.7502 0034.7503 0034.7504 0034.7505 0034.7506 0034.7507 0034.7508 0034.7509 0034.7510 0034.7511 0034.7512 0034.7513 0034.7514 0034.7515 0034.7516 0034.7517 0034.7518 0034.7519 0034.7520 0034.7521 0034.7522 mA / A / V ~ 50 mA / 125V 63 mA / 125V 80 mA / 125V 100 mA / 125V 125 mA / 125V 160 mA / 125V 200 mA / 125V 250 mA / 125V 315 mA / 125V 400 mA / 125V 500 mA / 125V 630 mA / 125V 800 mA / 125V 1 A / 125V 1.25 A / 125V 1.6 A / 125V 2 A / 125V 2.5 A / 125V 3.15 A / 125V 4 A / 125V 5 A / 125V 6.3 A / 125V Breaking Capacity A~ ac / dc 100A / 125V AC p.f. = 1 Volt. drop at In Sustained Pre-arcing Power diss. I2t at 10 • I n at 1 • In max. mV 900 800 700 600 550 480 390 350 300 250 220 210 160 155 145 130 125 120 110 110 95 85 max. mW 45 50 55 60 70 80 80 90 95 100 110 135 130 155 185 210 250 300 350 400 475 570 max. A2s 0.0056 0.009 0.014 0.025 0.044 0.058 0.1 0.17 0.26 0.32 0.58 0.75 0.98 2.8 3.8 5.2 7.5 14 22 27 59 100 Packaging 1,250 pcs, Ammopack, taped & reeled according to IEC 286, Part 2 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com