MICROCIRCUIT DATA SHEET Original Creation Date: 07/12/96 Last Update Date: 04/16/02 Last Major Revision Date: 03/15/02 MN54ACTQ16244-X REV 2A0 16-Bit Buffer/Line Driver with TRI-STATE Outputs General Description The ACTQ16244 contains sixteen non-inverting buffers with TRI-STATE outputs designed to be employed as a memory and address driver, clock driver, or bus oriented transmitter/receiver. The device is nibble controlled. Each nibble has separate TRI-STATE control inputs which can be shorted together for full 16-bit operation. The ACTQ16244 utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series TM features GTO TM output control for superior performance. Industry Part Number NS Part Numbers 54ACTQ16244 54ACTQ16244FMQB Prime Die D16244 Controlling Document SEE FEATURES SECTION Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C +25 C +125 C -55 C MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 Features - Utilizes NSC FACT Quiet Series technology Guaranteed simultaneous switching noise level and dynamic threshold performance Separate control logic for each byte and nibble 16-bit version of the ACTQ244 Outputs source/sink 24 mA CONTROLLING DOCUMENT: 54ACTQ16244FMQB 5962-951901QXA 2 MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 (Absolute Maximum Ratings) (Note 1) Supply Voltage (Vcc) -0.5V to +7.0V DC Input Diode Current (Iik) Vi = -0.5V Vi = Vcc +0.5V DC Output Diode Current (Iok) Vo = -0.5V Vo = Vcc +0.5V DC Output Voltage (Vo) -20 mA +20 mA -20 mA +20 mA -0.5V to Vcc +0.5V DC Vcc or Ground Current per Output Pin +50 mA Junction Temperature (Tj) Ceramic Flatpack Thermal Resistance Junction-To-Case (Theta JC) Junction-To-Ambient (Theta JA) (1 Watt at no airflow) Storage Temperature +175 C 10 C/Watt 80 C/Watt -65 C to +150 C Lead Temperature (Soldering, 10 Seconds) ESD Classification +300 C Class 3 Maximum Power Dissipation 750 mW DC Output Source/Sink Current (IO) +50 mA Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT TM circuits outside databook specifications. Recommended Operating Conditions Supply Voltage (Vcc) 4.5V to 5.5V Input Voltage (Vi) 0V to Vcc Output Voltage (Vo) 0V to Vcc Operating Temperature -55 C to +125 C Minimum Input Edge Rate (Delta V/Delta t) ACTQ Devices Vin from 0.8V to 2.0V Vcc @ 4.5V, 5.5V 125 mV/ns 3 MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IIH IIL VOL PARAMETER High Level input Current Low Level input Current Low level output voltage CONDITIONS NOTES VCC=5.5V, VIH=5.5V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 INPUT 0.1 uA 1 1, 2 INPUT 1.0 uA 2, 3 1, 2 INPUT -0.1 uA 1 1, 2 INPUT -1.0 uA 2, 3 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 VCC=4.5V, VIL=0.8V, IOL=50.0uA, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 VCC=5.5V, VIL=0.8V, IOL=24.0mA, VIH=2.0V 1, 2 OUTPUT .36 V 1 1, 2 OUTPUT .50 V 2, 3 VCC=5.5V, VIL=0.8V, IOL=50.0uA, VIH=2.0V 1, 2 OUTPUT .10 V 1, 2, 3 1.65 V 1, 2, 3 VCC=5.5V, VIL=0.0V VCC=4.5V, VIL=0.8V, IOL=24.0mA, VIH=2.0V VIOL Dynamic Output Current LOW VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=50.0mA 1, OUTPUT 2, 5 VOH High Level Output Voltage VCC=4.5V, VIL=0.8V, IOL=-24.0mA, VIH=2.0V 1, 2 OUTPUT 3.86 V 1 1, 2 OUTPUT 3.7 V 2, 3 VCC=4.5V, VIL=0.8V, IOL=-50.0uA, VIH=2.0V 1, 2 OUTPUT 4.4 V 1, 2, 3 VCC=5.5V, VIL=0.8V, IOL=-24.0mA, VIH=2.0V 1, 2 OUTPUT 4.86 V 1 1, 2 OUTPUT 4.7 V 2, 3 VCC=5.5V, VIL=0.8V, IOL=-50.0uA, VIH=2.0V 1, 2 OUTPUT 5.4 V 1, 2, 3 3.85 V 1, 2, 3 VIOH Dynamic Output Current HIGH VCC=5.5V, VIH=5.5V, VIL=0.0V, IOL=-50.0mA 1, OUTPUT 2, 5 ICCL Supply Current VCC=5.5V, VIN=5.5V or Gnd 1, 2 VCC 8.0 uA 1 1, 2 VCC 160 uA 2, 3 1, 2 VCC 8.0 nA 1 1, 2 VCC 160 uA 2, 3 1, 2 VCC 8.0 nA 1 1, 2 VCC 160 uA 2, 3 1, 2 VCC 1.0 mA 1 1, 2 VCC 1.6 mA 2, 3 ICCH ICCZ ICCT Supply Current Supply Current Supply Current VCC=5.5V, VIN=5.5V or Gnd VCC=5.5V, VIN=5.5V or Gnd VCC=5.5V, VINH=3.4V 4 MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: VCC 4.5V to 5.5V, Temp. Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED BUT NOT TESTED. SYMBOL IOZH PARAMETER Maximum Tri-State Leakage Current CONDITIONS NOTES VCC=4.5V, VINH=4.5V, VM=4.5V, VINL=0.0V, VIH=2.0V VCC=5.5V, VM=5.5V IOZL Minimum Tri-State Leakage Current VCC=4.5V, VM=0.0V VCC=5.5V, VM=0.0V PINNAME MIN MAX UNIT SUBGROUPS 1, 2 OUTPUT 0.5 uA 1 1, 2 OUTPUT 10.0 uA 2, 3 1, 2 OUTPUT 0.5 uA 1 1, 2 OUTPUT 10.0 uA 2, 3 1, 2 OUTPUT -0.5 uA 1 1, 2 OUTPUT -10.0 uA 2, 3 1, 2 OUTPUT -0.5 uA 1 1, 2 OUTPUT -10.0 uA 2, 3 VIKL VCC=4.5V, IKL=-18mA 1, 2 INPUT -1.2 V 1, 2, 3 VIKH VCC=4.5V, IKH=18mA 1, 2 INPUT 5.7 V 1, 2, 3 CIN INPUT PIN CAPACITANCE 6 INPUT 10 pF 4 COUT OUTPUT PIN CAPACITANCE 6 OUTPUT 15 pF 4 CPD POWER DISSIPATION CAPACITANCE 6 100 pF 4 VILD Maximum Low Dynamic Input Voltage Level VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT 0.8 V 4 VIHD Minimum High Dynamic Input Voltage Level VCC=5.0V, LOAD 50pF / 500 OHMS 6, 9 INPUT V 4 VOLP Quiet Output Maximum Dynamic Vol VCC=5.0V, LOAD 50pF / 500 OHMS Maximum High Output Noise 6, 8 OUTPUT 1000 mV 4 VOLV Quiet Output Minimum Dynamic Vol VCC=5.0V, LOAD 50pF / 500 OHMS Maximum Low Output Noise 6, 8 OUTPUT -1000 mV 4 VOHP Maximum Overshoot VCC=5.0V, LOAD 50pF / 500 OHMS Maximum Overshoot 6, 8 OUTPUT VOH +1000 mV 4 VOHV Minimum Vcc Droop VCC=5.0V, LOAD 50pF / 500 OHMS Minimum Vcc Droop 6, 8 OUTPUT VOH -1300 mV 4 5 2.0 MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: CL=50pf, RL=500 OHMS, TR/TFALL=3.0ns, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP 11 IS GUARANTEED BUT NOT TESTED. SYMBOL tpLH tpHL tpLZ tpHZ tpZL tpZH PARAMETER Propagation Delay Propagation Delay Output Disable Time Output Disable Time Output Enable Time Output Enable Time CONDITIONS NOTES VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V VCC=4.5V PINNAME MIN MAX UNIT SUBGROUPS 3, In to 4, 7 On 2.5 8.5 ns 9 3, In to 4, 7 On 2.5 10.0 ns 10, 11 3, In to 4, 7 On 2.5 8.5 ns 9 3, In to 4, 7 On 2.5 9.5 ns 10, 11 3, OE to 4, 7 On 2.0 8.0 ns 9 3, OE to 4, 7 On 2.0 9.5 ns 10, 11 3, OE to 4, 7 On 2.0 8.5 ns 9 3, OE to 4, 7 On 2.0 9.5 ns 10, 11 3, OE to 4, 7 On 2.5 9.0 ns 9 3, OE to 4, 7 On 2.5 10.5 ns 10, 11 3, OE to 4, 7 On 2.5 8.5 ns 9 3, OE to 4, 7 On 2.5 9.5 ns 10, 11 TOSHL Pin to Pin Skew HL Data to Output VCC=4.5V 6 Pin to Pin Skew 1.2 V 9, 10, 11 TOSLH Pin to Pin Skew LH Data to Output VCC=4.5V 6 Pin to Pin Skew 2.5 V 9, 10, 11 TOST Pin to Pin Skew LH/HL Data to Output VCC=4.5V 6 Pin to Pin Skew 4.3 V 9, 10, 11 Note 1: Note 5: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, & 8. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A1, 2, 7, & 8. SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9. SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE, SUBGROUPS A9 & 10. TRANSMISSION LINE DRIVING TEST, GUARDBANDED LIMITS SET FOR +25C, 2 MSEC DURATION MAX. Note 6: Note 7: GUARANTEED BUT NOT TESTED. (DESIGN CHARACTERIZATION DATA) +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN LIMITS. Note 2: Note 3: Note 4: 6 MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 (Continued) Note 8: Note 9: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 3V. ONE OUTPUT @ VOL. MAX NUMBER OF DATA INPUTS (N) SWITCHING. (N-1) INPUTS SWITCHING 0V TO 3V. INPUT-UNDER-TEST SWITCHING 3V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ= 1 MHZ. 7 MICROCIRCUIT DATA SHEET MN54ACTQ16244-X REV 2A0 Revision History Rev ECN # 2A0 M0004005 04/16/02 Rel Date Originator Changes Rose Malone Update MDS: MN54ACTQ16244-X, Rev. 1A0 to MN54ACTQ16244-X, Rev. 2A0. Updated Main Table, Features Section, Recommended Operating Conditions Section and DC Electrical Section parameter VOLP form 0.8 to 1000mV, VOLV from -0.8 to -1000mV, VOHP from VOH +8.0 to +1000mV and VOHV from VOH -1.2 to -1300mV. Corrected AC parameter tpZL min. limit from 9.0 to 2.5nS, subgroups 10, 11. Added parameters TOSHL, TOSLH, TOST. 8