Type 8AG / 8AP 1/4 x 1 inch Glass Tube Fast Blow Fuse Series 8AGD0199 Catalog Number Electrical Characteristics (UL/CSA STD. 248-14) Blow Time Testing current Minimum Maximum 100% 4 Hrs. N/A 135% N/A 1 Hr 200% N/A 5 sec Vßtc Approvals Type Amp range / Volt @ I.R. ability V Listed File No. E20624 ß Certified File No. LR39772 8AG / 8AP 80mA.- 2A / 250V AC@ 100A 80mA.- 7A/125V AC@ 10000A t Approval File No. 32-1764 / No. 32-1766 8AG / 8AP Safety Agency Approvals File No. 32-1765 8AG 1A.- 5A / 125V AC@ 500A >5A.- 15A / 125V AC@ 300A Operating Temperature -55ºC to +125ºC Physical Specification Materials Glass body / Nickel Plated Brass Caps Lead wire: Tin-lead plated Copper, Diameter 0.032" thru’ 7A Typical Volt-drop Melting I2T Melting I2T Maximum Cold @100% In < 10 mSec @10 In Power Resistance Dissipation (ohm) (Volt) max. (A2 Sec) (A2 Sec) (W) 8AG (P) 80 80mA 13.6 3.71 0.0013 0.001 0.43 8AG (P) 100 100mA 10.3 3.28 0.002 0.002 0.48 8AG (P) 125 125mA 7.0 3.67 0.004 0.003 0.68 8AG (P) 150 150mA 5.3 3.24 0.007 0.006 0.72 8AG (P) 200 200mA 4.0 2.86 0.013 0.011 0.84 8AG (P) 250 250mA 3.1 2.53 0.023 0.019 0.93 8AG (P) 350 350mA 2.0 2.10 0.054 0.046 1.10 8AG (P) 500 500mA 0.34 0.217 0.23 0.22 0.16 8AG (P) 750 750mA 0.19 0.207 0.69 0.68 0.23 1A 0.14 0.202 1.20 1.21 0.30 8AG (P) 1.25 1.25A 0.10 0.197 2.09 2.13 0.37 8AG (P) 1.5 1.5A 0.08 0.193 3.6 3.8 0.44 2A 0.06 0.188 6.4 6.7 0.55 2.5A 0.04 0.184 11.1 11.8 0.68 3A 0.03 0.179 19.3 20.9 0.81 3.5A 0.027 0.177 25.5 27.8 0.92 8AG (P) 4 4A 0.023 0.175 34 37 1.03 8AG (P) 5 5A 0.017 0.171 59 65 1.26 8AG (P) 6 6A 0.013 0.167 102 116 1.49 8AG (P) 7 7A 0.011 0.165 135 154 1.71 8AG (P) 1 8AG (P) 2 8AG (P) 2.5 8AG (P) 3 8AG (P) 3.5 Consult manufacturer for other ratings Mechanical Dimensions Marking On fuse: “bel", “8AG", “Current Rating", “Voltage Rating", and “Appropriate Safety Logos” On label: Above info plus “c” and interrupting rating Voltage on fuse: 250V for 80mA to 2A; 125V for 2A and above Packaging 1.In bulk: 8AG - 1,000 pcs per box; 8AP - 500 pcs per box 2. On Axial Tape & Reel: 1,000 pcs per reel 3. Tape & Reel specification: per EIA-296-E & IEC 286-1 @ 10mm Pitch and 73mm inside Tape Spacing Ampere Rating 1.00" ± 0.03" 8AG 8AP 0.250" ± 0.004" (25.4 ± 0.8mm) (6.35 ± 0.1mm) 1.50" ± 0.08" 1.03 ± 0.03 0.270" ± 0.004" (38.1 ± 2mm) (26.2 ± 0.8mm) (6.9 ± 0.1mm) SEE LEAD SIZE LISTED IN “ MATERIAL” Specifications subject to change without notice Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Internet: http://www. belfuse.com Type 8AG / 8AP 1/4 x 1 inch Glass Tube Fast Blow Fuse Series 8AGC0600 - 80mA - 100mA - 125mA - 150mA - 200mA - 250mA - 350mA - 500mA - 750mA - 1A - 1.25A - 1.5A - 2A - 2.5A - 3A - 3.5A - 4A - 5A - 6A - 7A 8AG / 8AP - TIME CURRENT CHARACTERISTIC CURVE 10000 TIME IN SECONDS 1000 100 10 0.1 0.01 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES Specifications subject to change without notice 1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 FaxFax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Te l : 8 5 2 - 2 3 2 8 - 5 5 1 5 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. P r e s t o n Te c h n o l o g y M a n a g e m e n t C e n t r e Marsh Lane, Preston PR1 8U Lancashire, U.K Te l : 4 4 - 1 7 7 2 - 5 5 6 6 0 1 Fax: 44-1772-888366