SAW Components Data Sheet B3621 SAW Components B3621 Low-Loss Filter 227,0 MHz Data Sheet Ceramic package QCC12 Features ● Clean-up filter for GSM basestations ● Package for Surface Mounted Technology (SMT) ● Hermetically sealed ceramic package Terminals ● Gold plated Dim. in mm, aprox. weight 0,4 g Pin configuration 11 5 1 7 2, 6, 8, 12 3, 4, 9, 10 Input Output Input ground Output ground Case ground not connected Type Ordering code B3621 B39231-B3621-Z510 Marking and Package according to C61157-A7-A55 Packing according to F61074-V8026-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps – 45/+ 85 – 45/+ 85 0 10 2 ˚C ˚C V dBm source impedance 50 Ω Apr 04, 2001 SAW Components B3621 Low-Loss Filter 227,0 MHz Data Sheet Characteristics TA = 25 ˚C ZS = 50 Ω and matching network ZL = 50 Ω and matching network Ambient temperature: Source impedance: Load impedance: min. typ. max. Nominal frequency fN — 227,00 — Minimum insertion attenuation Reference level for the following data αmin — 6,0 7,5 dB Amplitude ripple (p-p) ∆α — 0,6 1,1 dB fN ± 400 kHz Relative attenuation (relative to αmin) fN - 20,0 MHz ... fN - 6,0 MHz fN - 6,0 MHz ... fN - 1,8 MHz fN + 1,8 MHz ... fN + 6,0 MHz fN + 6,0 MHz ... fN + 20,0 MHz αrel Group delay ripple (p-p) ∆τ fN ± 400 kHz TCf Temperature coefficient of frequency 1) 1) Temperature dependance of fc: 40 30 30 40 — — — — — — — — dB dB dB dB — 70 150 ns — – 18 — fc(TA) = fc(T0)(1 + TCf(TA – T0)) Matching network: Cp1 = 22 pF Ls2 = 27 nH Ls3 = 27 nH Cp4 = 22 pF 3 MHz Apr 04, 2001 ppm/K SAW Components B3621 Low-Loss Filter 227,0 MHz Data Sheet Transfer function (TA= 25 ˚C) Transfer function (pass band, TA= 25 ˚C) 4 Apr 04, 2001 SAW Components B3621 Low-Loss Filter 227,0 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC IS P.O. Box 80 17 09, D-81617 München EPCOS AG 1999. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 5 Apr 04, 2001