Multilayer Leaded Capacitors, EIA Standard Z5U (Y5U) / F Characteristic Features ● Extremely high volumetric efficiency ● Non-linear capacitance change ● Y5U characteristic is also fulfilled Applications ● ● ● ● Blocking Coupling Decoupling Interference suppression Terminals ● Parallel wire leads Dimensions (mm) iron-nickel, tinned ● Crimped leads ● Non-standard lead lengths on request Lead spacing Marking = 2,5 +– 0,6 0,1 mm hmax bmax smax 5,5 5,0 2,5 6,5 5,0 2,5 Type B37982-N B37988-N ● Rated capacitance, tolerance, manu- facturer’s logo, ceramic material, voltage Packing Optionally Last 2 digits of ordering code Tape & reel AMMO pack Bulk -51 -54 -00 Standard packing in bold print Maximum ratings ● Climatic category Lead spacing = 5,0 +– 0,6 0,1 mm hmax bmax smax 5,5 5,0 2,5 Type B37982-G B37988-G B37985-N 6,5 5,0 2,5 9,0 7,5 2,5 in accordance with IEC 68-1: 30/085/56 Available capacitance tolerances Tolerance Symbol ∆CR/CR = ± 20 % M Standard tolerance in bold print Rated voltage values VR = 50 V 72 Siemens Matsushita Components Product range Z5U (Y5U)/F characteristic Lead spacing 2,5 mm 5,0 mm h × b × s (mm) 5,5 × 5,0 × 2,5 6,5 × 5,0 × 2,5 5,5 × 5,0 × 2,5 6,5 × 5,0 × 2,5 9,0 × 7,5 × 2,5 Type B37982-N B37988-N B37982-G B37988-G B37985-N VR (Vdc) 50 50 50 50 50 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 150 nF 220 nF 330 nF 470 nF 680 nF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF Siemens Matsushita Components 73 Ordering codes for Z5U (Y5U) / F characteristic, 50 Vdc Lead spacing 2,5 mm 5,0 mm h × b × s (mm) 5,5 × 5,0 × 2,5 6,5 × 5,0 × 2,5 5,5 × 5,0 × 2,5 6,5 × 5,0 × 2,5 9,0 × 7,5 × 2,5 CR Ordering code 1) B37982B37988- B37982- 10,0 nF 15,0 nF 22,0 nF 33,0 nF 47,0 nF 68,0 nF 100,0 nF 150,0 nF 220,0 nF 330,0 nF 470,0 nF 680,0 nF 1,0 µF 1,5 µF 2,2 µF 3,3 µF 4,7 µF -N5103-M54 -N5153-M54 -N5223-M54 -N5333-M54 -N5473-M54 -N5683-M54 -N5104-M54 -N5154-M54 -G5103-M54 -G5153-M54 -G5223-M54 -G5333-M54 -G5473-M54 -G5683-M54 -G5104-M54 -G5154-M54 -N5224-M54 -N5334-M54 -N5474-M54 -N5684-M54 -N5105-M54 B37988- B37985- -G5224-M54 -G5334-M54 -G5474-M54 -G5684-M54 -G5105-M54 -N5155-M54 -N5225-M54 -N5335-M54 -N5475-M54 1) The tables contain the ordering codes for - standard capacitance tolerance: M = ± 20%. Example: B37982-N5103-M54 - standard packing: 54 = AMMO pack. Example: B37982-N5103-M54 Other packing modes: see page 72 74 Siemens Matsushita Components