Bussmann® Ferrule Type, Fast-Acting Fuses BAN For 13/32∑ x 1-1/2∑ (10.3mm x 38.1mm) Dimensional Data Time-Current Characteristic Curves–Average Melt AMPERE RATING 30 15 20 10 3 1 (Full Size Curves Available) 100 1.5" (±0.031) (38.1mm) 0.41" (±0.004) (10.3mm) TIME IN SECONDS 10 CATALOG SYMBOL: BAN 13/32” x 1-1/2” (10.3mm x 38.1mm) 5AG FERRULE TYPE, FAST-ACTING 1-30A 250 VAC INTERRUPTING RATING: 35A (0-1A), 100A (1-1/2-3A), 200A (4-8A), 750A (10-15A), 10 KA (20-30A) BODY MATERIAL: FIBRE TUBE FERRULE MATERIAL: BRONZE FERRULE PLATING: NICKEL 1 .1 • Fibre; formerly 5AB. • Mounts in Buss BM series fuseblocks. Electrical Ratings (Catalog Symbol and Amperes) BAN-25 BAN-12 BAN-30 BAN-3 BAN-7 BAN-15 — BAN-4 BAN-8 BAN-20 — .01 1,000 BAN-10 BAN-6 100 BAN-5 BAN-2 1 BAN-1 10 250 Volts AC RMS SYMMETRICAL CURRENT IN AMPERES Carton Quantity and Weight Ampere Ratings 1-30 Carton Qty Lbs. Weight* Kg. 100 1.4 635 *Weight per carton. CE logo denotes compliance with European Union Low Voltage Directive (50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at 636-527-1270 for more information. The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 2-21-00 N99130 Rev. A Form No. BAN Page 1 of 1 BIF Doc #2046