Series CMD24/CMA24 25-125Amp • 240 Vac • AC Output • Zero Voltage and Random Turn-On Switching • Panel Mount • Status Indicating LED • DC or AC Control MODEL NUMBERS Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross or random turn-on versions. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. CMD2425 CMA2425 CMD2450 CMA2450 CMD2475 CMA2475 CMD2490 CMA2490 24-280 24-280 24-280 24-280 24-280 24-280 25 50 75 90 110 125 Min. Load Current, [Arms] 0.15 0.15 0.25 0.25 0.25 0.25 Transient Overvoltage [Vpk] 600 600 600 600 600 600 Max. Surge Current, (16.6ms) [Apk] 250 625 1000 1200 1500 1750 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.02 0.63 0.31 0.28 0.25 0.22 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1620 4150 6000 9340 12700 10 10 10 10 10 10 500 500 500 500 500 500 OUTPUT SPECIFICATIONS ➀ Operating Voltage (47-63 Hz) [Vrms] Max. Load Current ➂ [Arms] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ Max. Turn-On Time ➃ CMD24110 CMD24125 CMA24110 CMA24125 1/2 Cycle (DC Control), 10.0 msec (AC Control) 1/2 Cycle (DC Control), 40.0 msec(AC Control) Max. Turn-Off Time 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS➀ DC CONTROL AC CONTROL 0.5 0.5 0.5 0.5 GENERAL SPECIFICATIONS Control Voltage Range 3-32 Vdc 90-140 Vrms Max. Reverse Voltage 32 Vdc — Max. Turn-On Voltage 3.0 Vdc 90 Vrms Max. Capacitance Input/Output 1.0 Vdc 10 Vrms Ambient Operating Temperature Range 30.0mA➄ — Min. Turn-Off Voltage Max. Input Current Typical Input Current 17mA @ 5 Vdc 15mA @ 120 Vrms GENERAL NOTES ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ HEAT SINKING REQUIRED, for derating curves see page 2. ➃ Turn-on time for DC control random turn-on versions is 0.02msec. ➄ Input circuitry incorporates active current limiter. 0.5 Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc 8 pF -40 to 80ºC -40 to 125ºC Ambient Storage Temperature Range Green LED Status Indicating Display MECHANICAL SPECIFICATIONS 3.0 oz. (86.5g) Weight: (typical) Encapsulation: Thermally Conductive Epoxy Terminals: Cage Type Maximum Wire Size- Output: AWG 6 (4.1mm) Input: AWG10 (2.6mm) ©1998 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 170 CMD/CMA.060398, PAGE 1 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMD24/CMA24 25-125Amp • 240 Vac • AC Output 0.75 (19.1) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. .45 (11.4) MECHANICAL SPECIFICATIONS All dimensions are in inches (millimeters) TU S INP U T STA INPUT 2.5 (63.5) 2.4 (63.5) 3.0 (76.2) SOLID STATE RELAY CMRD24/CMRA24 available with factory mounted heat sink and DIN rail mounting clip. Specifications available via FastFax, request document No. 171. OUTPUT AVAILABLE OPTIONS -10 Random Turn-On, Phase Controllable Example: CMD2450-10 E 1.75 (44.5) 24 Vac Input (18-36 Vac) Example: CMA2450E 3.0 (76.2) .9 (22.9) 1.15 (29.2) CURRENT DERATING CURVES 25A 50A 75A 60 90 110 10 NO HEATSINK 5 40 110 20 120 20 25 20 40 60 80 10 Max Ambient Temp. [ºC] 20 40 50 20 40 60 80 1ºC/W 110 40 80 0 20 40 60 80 Max Ambient Temp. [ºC] 75 20 40 60 80 Max Ambient Temp. [ºC] 90 .2ºC/W 120 .5ºC/W 100 80 1ºC/W 110 40 90 .4ºC/W 120 .5ºC/W .2ºC/W 100 80 1ºC/W 110 40 120 0 60 60 125A 120 0 45 160 .4ºC/W Power Dissipation 100 Base Plate Temp [ºC] 80 40 30 Load Current [Arms] 160 .2ºC/W .4ºC/W Load Current [Arms] 15 Max Ambient Temp. [ºC] 110A 90 .5ºC/W Power Dissipation 30 Load Current [Arms] 90A 120 20 110 30 0 Power Dissipation 15 1ºC/W 120 0 Base Plate Temp [ºC] 10 Load Current [Arms] 100 120 NO HEATSINK 0 5 100 2ºC/W 95 .3ºC/W .5ºC/W 60 Base Plate Temp [ºC] 15 90 1.5ºC/W Power Dissipation 20 Power Dissipation 2ºC/W Base Plate Temp [ºC] Power Dissipation 100 3ºC/W .5ºC/W 1ºC/W 1ºC/W 25 Base Plate Temp [ºC] 95 Base Plate Temp [ºC] 30 120 0 30 60 90 120 Load Current [Arms] 0 20 40 60 80 Max Ambient Temp. [ºC] 30 60 90 120 Load Current [Arms] 0 20 40 60 80 Max Ambient Temp. [ºC] ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL PENDING CSA PENDING VDE PENDING FastFax Document No. 170 CMD/CMA.060398, PAGE 2 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMD48/CMA48 25-125Amp • 480 Vac • AC Output • Zero Voltage and Random Turn-On Switching • Panel Mount • Status Indicating LED • DC or AC Control MODEL NUMBERS Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross or random turn-on versions. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. CMD4825 CMA4825 CMD4850 CMA4850 CMD4875 CMA4875 CMD4890 CMA4890 48-530 48-530 48-530 48-530 48-530 48-530 25 50 75 90 110 125 Min. Load Current, [Arms] 0.15 0.15 0.25 0.25 0.25 0.25 Transient Overvoltage [Vpk] 1200 1200 1200 1200 1200 1200 Max. Surge Current, (16.6ms) [Apk] 250 625 1000 1200 1500 1750 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7 1.7 1.7 Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.02 0.63 0.31 0.28 0.25 0.22 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1620 4150 6000 9340 12700 10 10 10 10 10 10 500 500 500 500 500 500 OUTPUT SPECIFICATIONS ➀ Operating Voltage (47-63 Hz) [Vrms] Max. Load Current ➂ [Arms] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ CMD48110 CMD48125 CMA48110 CMA48125 Max. Turn-On Time➃ 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec(AC Control) 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS➀ 0.5 0.5 0.5 0.5 GENERAL SPECIFICATIONS DC CONTROL AC CONTROL Control Voltage Range 4-32 Vdc 90-140 Vrms Max. Reverse Voltage 32 Vdc — Max. Turn-On Voltage 4.0 Vdc 90 Vrms Max. Capacitance Input/Output 1.0 Vdc 10 Vrms Ambient Operating Temperature Range 30.0mA➄ — Min. Turn-Off Voltage Max. Input Current Typical Input Current 14mA @ 5 Vdc 15mA @ 120 Vrms GENERAL NOTES ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ HEAT SINKING REQUIRED, for derating curves see page 2. ➃ Turn-on time for DC control random turn-on versions is 0.02msec. ➄ Input circuitry incorporates active current limiter. 0.5 Dielectric Strength 50/60Hz Input/Output/Base 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc 8 pF -40 to 80ºC -40 to 125ºC Ambient Storage Temperature Range Green LED Status Indicating Display MECHANICAL SPECIFICATIONS 3.0 oz. (86.5g) Weight: (typical) Encapsulation: Thermally Conductive Epoxy Terminals: Cage Type Maximum Wire Size- Output: AWG6 (4.1mm) Input: AWG10 (2.6mm) ©1998 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 170 CMD/CMA.060398, PAGE 3 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMD48/CMA48 25-125Amp • 480 Vac • AC Output 0.75 (19.1) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. .45 (11.4) MECHANICAL SPECIFICATIONS All dimensions are in inches (millimeters) TU S INP U T STA INPUT 2.5 (63.5) 2.4 (63.5) 3.0 (76.2) CMRD48/CMRA48 available with factory mounted heat sink and DIN rail mounting clip. Specifications available via FastFax, request document No. 171. SOLID STATE RELAY OUTPUT AVAILABLE OPTIONS -10 Random Turn-On, Phase Controllable Example: CMD4850-10 E 1.75 (44.5) 24 Vac Input (18-36 Vac) Example: CMA4850E 3.0 (76.2) .9 (22.9) 1.15 (29.2) CURRENT DERATING CURVES 25A 50A 75A 60 90 110 10 NO HEATSINK 5 40 110 20 120 20 25 20 40 60 80 10 Max Ambient Temp. [ºC] 20 40 50 20 40 60 80 1ºC/W 110 40 80 0 20 40 60 80 Max Ambient Temp. [ºC] 75 20 40 60 80 Max Ambient Temp. [ºC] 90 .2ºC/W 120 .5ºC/W 100 80 1ºC/W 110 40 90 .4ºC/W 120 .5ºC/W .2ºC/W 100 80 1ºC/W 110 40 120 0 60 60 125A 120 0 45 160 .4ºC/W Power Dissipation 100 Base Plate Temp [ºC] 80 40 30 Load Current [Arms] 160 .2ºC/W .4ºC/W Load Current [Arms] 15 Max Ambient Temp. [ºC] 110A 90 .5ºC/W Power Dissipation 30 Load Current [Arms] 90A 120 20 110 30 0 Power Dissipation 15 1ºC/W 120 0 Base Plate Temp [ºC] 10 Load Current [Arms] 100 120 NO HEATSINK 0 5 100 2ºC/W 95 .3ºC/W .5ºC/W 60 Base Plate Temp [ºC] 15 90 1.5ºC/W Power Dissipation 20 Power Dissipation 2ºC/W Base Plate Temp [ºC] Power Dissipation 100 3ºC/W .5ºC/W 1ºC/W 1ºC/W 25 Base Plate Temp [ºC] 95 Base Plate Temp [ºC] 30 120 0 30 60 90 120 Load Current [Arms] 0 20 40 60 80 Max Ambient Temp. [ºC] 30 60 90 120 Load Current [Arms] 0 20 40 60 80 Max Ambient Temp. [ºC] ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL PENDING CSA PENDING VDE PENDING FastFax Document No. 170 CMD/CMA.060398, PAGE 4 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMD60/CMA60 25-125Amp • 600 Vac • AC Output • Zero Voltage and Random Turn-On Switching • Panel Mount • Status Indicating LED • DC or AC Control MODEL NUMBERS Featuring state-of-the-art Surface Mount Technology, these SPST-NO relays deliver proven reliability in the most demanding applications. Output consists of an SCR AC switch and is available in zero-cross or random turn-on versions. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. CMD6025 CMA6025 CMD6050 CMA6050 CMD6075 CMA6075 CMD6090 CMA6090 Nominal LIne Voltage (±10%) [Vrms] 600 600 600 600 600 600 Operating Voltage (47-63 Hz) [Vrms] 48-660 48-660 48-660 48-660 48-660 48-660 25 50 75 90 110 125 Min. Load Current, [Arms] 0.15 0.15 0.25 0.25 0.25 0.25 Transient Overvoltage [Vpk] 1200 1200 1200 1200 1200 1200 Max. Surge Current, (16.6ms) [Apk] 250 625 1000 1200 1500 1750 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.7 1.7 1.7 1.7 1.7 1.7 Thermal Resistance Junction to Case (RθJC) [˚C/W] 1.02 0.63 0.31 0.28 0.25 0.22 Maximum I2 t for Fusing, (8.3 msec.) [A2sec] 260 1620 4150 6000 9340 12700 Max. Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0 1.0 1.0 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ 500 500 500 500 500 500 OUTPUT SPECIFICATIONS ➀ Max. Load Current ➂ [Arms] CMD60110 CMD60125 CMA60110 CMA60125 Max. Turn-On Time➃ 1/2 Cycle (DC Control), 10.0 msec (AC Control) Max. Turn-Off Time 1/2 Cycle (DC Control), 40.0 msec(AC Control) 0.5 Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS➀ DC CONTROL Control Voltage Range 4-32 Vdc AC CONTROL 90-140 Vrms 0.5 0.5 0.5 0.5 GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base 32 Vdc — Max. Turn-On Voltage 4.0 Vdc 90 Vrms Max. Capacitance Input/Output Min. Turn-Off Voltage 1.0 Vdc 10 Vrms Ambient Operating Temperature Range 30.0mA➄ — Typical Input Current GENERAL NOTES 14mA @ 5 Vdc 15mA @ 120 Vrms 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc Max. Reverse Voltage Max. Input Current 0.5 8 pF -40 to 80ºC -40 to 125ºC Ambient Storage Temperature Range Green LED Status Indicating Display MECHANICAL SPECIFICATIONS ➀ All parameters at 25ºC unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ HEAT SINKING REQUIRED, for derating curves see page 2. ➃ Turn-on time for DC control random turn-on versions is 0.02msec. ➄ Input circuitry incorporates active current limiter. 3.0 oz. (86.5g) Weight: (typical) Encapsulation: Thermally Conductive Epoxy Terminals: Cage Type Maximum Wire Size- Output: AWG6 (4.1mm) Input: Awg10 (2.6mm) ©1998 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 170 CMD/CMA.060398, PAGE 5 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series CMD60/CMA60 25-125Amp • 600 Vac • AC Output 0.75 (19.1) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. .45 (11.4) MECHANICAL DIMENSIONS All dimensions are in inches (millimeters) TU S INP U T STA INPUT 2.5 (63.5) 2.4 (63.5) 3.0 (76.2) CMRD60/CMRA60 available with factory mounted heat sink and DIN rail mounting clip. Specifications available via FastFax, request document No. 171. SOLID STATE RELAY OUTPUT AVAILABLE OPTIONS -10 Random Turn-On, Phase Controllable Example: CMD6050-10 E 1.75 (44.5) 24 Vac Input (18-36 Vac) Example: CMA6050E 3.0 (76.2) .9 (22.9) 1.15 (29.2) CURRENT DERATING CURVES 25A 50A 75A 60 90 110 10 NO HEATSINK 5 40 110 20 120 20 25 20 40 60 80 10 Max Ambient Temp. [ºC] 20 40 50 20 40 60 80 110 40 0 20 40 60 80 Max Ambient Temp. [ºC] 75 20 40 60 80 Max Ambient Temp. [ºC] 90 .2ºC/W 120 .5ºC/W 100 80 1ºC/W 110 40 90 .4ºC/W 120 .5ºC/W .2ºC/W 100 80 1ºC/W 110 40 120 0 80 60 125A 120 0 45 160 .4ºC/W Power Dissipation 100 1ºC/W 60 30 Load Current [Arms] 160 Base Plate Temp [ºC] 80 40 15 Max Ambient Temp. [ºC] .2ºC/W .4ºC/W Load Current [Arms] 110 30 110A 90 .5ºC/W Power Dissipation 30 Load Current [Arms] 90A 120 20 1ºC/W 0 Power Dissipation 15 60 120 0 Base Plate Temp [ºC] 10 Load Current [Arms] 100 120 NO HEATSINK 0 5 100 2ºC/W 95 .3ºC/W .5ºC/W Base Plate Temp [ºC] 15 90 1.5ºC/W Power Dissipation 20 Power Dissipation 2ºC/W Base Plate Temp [ºC] Power Dissipation 100 3ºC/W .5ºC/W 1ºC/W 1ºC/W 25 Base Plate Temp [ºC] 95 Base Plate Temp [ºC] 30 120 0 30 60 90 120 Load Current [Arms] 0 20 40 60 80 Max Ambient Temp. [ºC] 30 60 90 120 Load Current [Arms] 0 20 40 60 80 Max Ambient Temp. [ºC] ©1998 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL PENDING CSA PENDING VDE PENDING FastFax Document No. 170 CMD/CMA.060398, PAGE 6 OF 6 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected]