DVHV2800D Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES The DVHV series of high reliability DC-DC converters is operable over the full military (-55 °C to +125 °C) temperature range with no power derating. Unique to the DVHV series is a magnetic feedback circuit that is radiation immune. Operating at a nominal fixed frequency of 500 kHz, these regulated, isolated units utilize well controlled undervoltage lockout circuitry to eliminate slow start-up problems. · · · These converters are designed and manufactured in a facility qualified to ISO9001, compliant to AS9000, and certified to MIL-PRF-38534 and MIL-STD-883. · · · · · · · · · · · · · High Reliability Very Low Output Noise Wide Input Voltage Range: 15 to 50 Volts per MIL-STD-704 Up to 15 Watts Output Power Radiation Immune Magnetic Feedback Circuit NO Use of Optoisolators Undervoltage Lockout Industry Standard Pinout High Input Transient Voltage: 80 Volts for 1 sec per MIL-STD-704A Radiation Hardened Version Available Precision Seam Welded or Solder Seal Hermetic Package Custom Versions Available Additional Environmental Screening Available Meets MIL-STD-461C and MIL-STD-461D EMC Requirements When Used With a DVMC28 EMI Filter Flanged and Non-flanged Versions Available. MIL-PRF-38534 Element Evaluated Components Figure 1 – DVHV2800D / DVHV2800DF DC-DC Converter (Not To Scale) 10021DSA 17921 Bothell-Everett Highway, Suite 108 Bothell, WA 98012 http://www.vpt-inc.com Sales Information: Phone: (425) 487-4850 Fax: (425) 487-4802 E-mail: [email protected] 1 DVHV2800D Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) 1 Output Power Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 15 Watts 11 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight DVHV2805D Conditions Min Typ +15°C -65°C to +150°C 270°C 50 grams DVHV2812D Max Min Typ Max Units STATIC Continuous INPUT Voltage4 Current Ripple Current 15 28 50 15 28 50 V Transient, 1 sec - - 80 - - 80 V Inhibited - - 6 - - 6 mA No Load - - 75 - - 75 mA Full Load5, 20Hz to 20MHz - - 50 - - 50 mAp-p Inhibit Pin Input4 0 - 1.5 0 - 1.5 V Inhibit Pin Open Circuit Voltage4 9.0 11.0 13.0 9.0 11.0 13.0 V UVLO Turn On 13.5 - 14.8 13.5 - 14.8 V UVLO Turn Off 4 OUTPUT Voltage5 Power3,6 11.0 - 14.5 11.0 - 14.5 V +VOUT TCASE = 25°C 4.95 5.0 5.05 11.88 12.0 12.12 V +VOUT TCASE = -55°C to +125°C 4.925 5.0 5.075 11.82 12.0 12.18 V -VOUT TCASE = 25°C 4.925 5.0 5.075 11.82 12.0 12.18 V -VOUT TCASE = -55°C to +125°C 4.90 5.0 5.10 11.76 12.0 12.24 V 0 - 15 0 - 15 W W Total ±VOUT Either Output 0 - 10.5 0 - 10.5 Current3,6 ±VOUT Either Output 0 - 2.1 0 - 0.875 A Ripple Voltage ±VOUT Full Load5, 20Hz to 20MHz - - 60 - - 50 mVp-p +VOUT VIN = 16V to 40V - - 20 - - 20 mV -VOUT VIN = 16V to 40V - - 200 - - 200 mV +VOUT No Load to Full Load5 - - 50 - - 50 mV -VOUT 5 No Load to Full Load - - 200 - - 200 mV -VOUT +Load 70%, -Load 30% +Load 30%, -Load 70% - - 500 - - 500 mV Full Load5 74 - - 79 - - % Overload4 - - 11 - - 11 W Short Circuit - - 11 - - 11 W Either Output - - 500 - - 500 mF 350 450 550 350 450 550 kHz kHz Line Regulation Load Regulation Cross Regulation EFFICIENCY LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD4 SWITCHING FREQUENCY SYNC FREQUENCY RANGE VH – VL = 5V, DC = 20-80% 500 - 600 500 - 600 ISOLATION 500 VDC, TCASE = 25°C 100 - - 100 - - MΩ THERMAL RESISTANCE Case to Ambient (qCA) - 19 - - 19 - °C/W MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - 413 - - 413 - kHrs See notes next page. 10021DSA 2 DVHV2800D Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) 1 Output Power Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 15 Watts 11 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight DVHV2805D +15°C -65°C to +150°C 270°C 50 grams DVHV2812D Min Typ Max Min Typ Max - - 200 - - 300 Units DYNAMIC Load Step Output Transient ±VOUT 2 Load Step Recovery Line Step Output Transient4 ±VOUT Line Step Recovery2, 4 Turn On Delay Turn On Overshoot2 Notes: 1. 2. 3. 4. 5. 6. ±VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V mVPK - - 400 - - 500 mSec - 300 600 - 500 900 mVPK - 300 500 - 300 500 mSec - - 20 - - 20 mSec - - 25 - - 50 mVPK Dependant on output voltage. Time for output voltage to settle within 1% of its nominal value. Derate linearly to 0 at 135°C. Verified by qualification testing. Half load at +VOUT and half load at –VOUT. Up to 70% of the total power or current can be drawn from any one of the two outputs. 10021DSA 3 DVHV2800D Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) 1 Output Power Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 15 Watts 11 Watts Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight DVHV2815D Conditions Min Typ Max +15°C -65°C to +150°C 270°C 50 grams Units STATIC Continuous INPUT Voltage4 Current Ripple Current 15 28 50 V Transient, 1 sec - - 80 V Inhibited - - 6 mA No Load - - 75 mA Full Load5, 20Hz to 20MHz - - 50 mAp-p Inhibit Pin Input4 0 - 1.5 V Inhibit Pin Open Circuit Voltage4 9.0 11.0 13.0 V UVLO Turn On 13.5 - 14.8 V UVLO Turn Off 4 OUTPUT Voltage5 Power3,6 11.0 - 14.5 V +VOUT TCASE = 25°C 14.85 15.0 15.15 V +VOUT TCASE = -55°C to +125°C 14.775 15.0 15.225 V -VOUT TCASE = 25°C 14.775 15.0 15.225 V -VOUT TCASE = -55°C to +125°C 14.70 15.0 15.30 V - - 15 W W Total ±VOUT Either Output - - 10.5 Current3,6 ±VOUT Either Output - - 0.7 A Ripple Voltage ±VOUT Full Load5, 20Hz to 20MHz - - 50 mVp-p +VOUT VIN = 16V to 40V - - 20 mV -VOUT VIN = 16V to 40V - - 200 mV +VOUT No Load to Full Load5 - - 50 mV -VOUT 5 No Load to Full Load - - 200 mV -VOUT +Load 70%, -Load 30% +Load 30%, -Load 70% - - 500 mV Full Load5 80 - - % Overload4 - - 11 W Short Circuit - - 11 W Either Output - - 500 mF 350 450 550 kHz kHz Line Regulation Load Regulation Cross Regulation EFFICIENCY LOAD FAULT POWER DISSIPATION CAPACITIVE LOAD4 SWITCHING FREQUENCY SYNC FREQUENCY RANGE VH – VL = 5V, DC = 20-80% 500 - 600 ISOLATION 500 VDC, TCASE = 25°C 100 - - MΩ THERMAL RESISTANCE Case to Ambient (qCA) - 19 - °C/W MTBF (MIL-HDBK-217F) AIF @ TC = 55°C - 413 - kHrs See notes next page. 10021DSA 4 DVHV2800D Series SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load5, Unless Otherwise Specified) ABSOLUTE MAXIMUM RATINGS Input Voltage (Continuous) Input Voltage (Transient, 1 second) 1 Output Power Power Dissipation (Full Load, TCASE = +125°C) Parameter 50 VDC 80 Volts 15 Watts 11 Watts Conditions Junction Temperature Rise to Case Storage Temperature Lead Solder Temperature (10 seconds) Weight DVHV2815D Min Typ Max - - 350 +15°C -65°C to +150°C 270°C 50 grams Units DYNAMIC Load Step Output Transient ±VOUT 2 Load Step Recovery Line Step Output Transient4 ±VOUT Line Step Recovery2, 4 Turn On Delay Turn On Overshoot2 Notes: 1. 2. 3. 4. 5. 6. ±VOUT Half Load to Full Load VIN = 16V to 40V VIN = 0V to 28V mVPK - - 500 mSec - 500 900 mVPK - 300 500 mSec - - 20 mSec - - 50 mVPK Dependant on output voltage. Time for output voltage to settle within 1% of its nominal value. Derate linearly to 0 at 135°C. Verified by qualification testing. Half load at +VOUT and half load at –VOUT. Up to 70% of the total power or current can be drawn from any one of the two outputs. 10021DSA 5 DVHV2800D Series BLOCK DIAGRAM D2 PIN 3 +V OUT C3 T1 PIN 1 28V IN Rs3 OUT COM D1 Rs2 PIN 4 C2 L1 C1 PIN 5 -V OUT IN COM PIN 10 Q1 UNDER VOLTAGE SHUTDOWN PRIMARY HOUSEKEEPING SUPPLY MAGNETIC FEEDBACK Rs1 PWM CONTROL VOLTAGE AND CURRENT AMPLIFIERS SECONDARY HOUSEKEEPING SUPPLY INH PIN 2 SYNC PIN 9 Figure 2 CONNECTION DIAGRAM 1 3 28V IN +V OUT 9 28 Vdc + - 2 SYNC INH 4 LOAD OUT COM LOAD 10 5 IN COM -V OUT Figure 3 10021DSA 6 DVHV2800D Series INHIBIT DRIVE CONNECTION DIAGRAMS 28V IN 1 28V IN 1 10K 10K INH 2 OPTOISOLATOR BIAS OPTIONAL CAPACITOR INH 2 BIAS OPTIONAL CAPACITOR 12V 12V IN COM 10 IN COM 10 Figure 4 – Internal Inhibit Circuit and Recommended Drive Figure 5 – Isolated Inhibit Drive (Shown with optional capacitor for turn-on delay) (Shown with optional capacitor for turn-on delay) EMI FILTER HOOKUP DIAGRAM DVMC28 EMI FILTER 1 DVHV2800D DC-DC CONVERTER 2 28V IN 1 28V OUT 3 28V IN +V OUT LOAD 9 SYNC 28 Vdc 4 + - OUT COM 2 INH LOAD 5 4 10 IN COM OUT COM 3 5 IN COM CASE -V OUT 6, 7,8 Figure 6 – Converter with EMI Filter 10021DSA 7 DVHV2800D Series EFFICIENCY PERFORMANCE CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified) VIN = 16V VIN = 28V VIN = 40V 85 80 80 Efficiency (%) Efficiency (%) 75 70 65 75 70 65 60 60 55 3 6 9 12 3 15 6 9 12 15 Output Pow er (W) Output Pow er (W) Figure 7 – DVHV2805D Figure 8 – DVHV2812D Efficiency (%) vs. Output Power (W) Efficiency (%) vs. Output Power (W) 85 Efficiency (%) 80 75 70 65 60 3 6 9 12 15 Output Pow er (W) Figure 9 – DVHV2815D Efficiency (%) vs. Output Power (W) 10021DSA 8 DVHV2800D Series EMI PERFORMANCE CURVES (TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified) Figure 10 – DVHV2800D without EMI Filter Figure 11 – DVHV2800D with EMI Filter 10021DSA 9 DVHV2800D Series PACKAGE SPECIFICATIONS (NON-FLANGED, SOLDER SEAL) TOP VIEW SIDE VIEW PIN FUNCTION 1 28V IN 2 INHIBIT 3 +V OUT 4 OUT COM 5 -V OUT 6 CASE 7 CASE 8 CASE 9 SYNC 10 IN COM BOTTOM VIEW Figure 12 – Non-Flanged, Solder Seal Package and Pinout (Dimensional Limits are ±0.005” Unless Otherwise Stated) 10021DSA 10 DVHV2800D Series PACKAGE SPECIFICATIONS (NON-FLANGED, SEAM SEAL) TOP VIEW SIDE VIEW PIN FUNCTION 1 28V IN 2 INHIBIT 3 +V OUT 4 OUT COM 5 -V OUT 6 CASE 7 CASE 8 CASE 9 SYNC 10 IN COM BOTTOM VIEW Figure 13 – Non-Flanged, Seam Seal Package and Pinout (/HB Screened Units Only) (Dimensional Limits are ±0.005” Unless Otherwise Stated) 10021DSA 11 DVHV2800D Series PACKAGE SPECIFICATIONS (FLANGED, SOLDER SEAL) TOP VIEW SIDE VIEW PIN FUNCTION 1 28V IN 2 INHIBIT 3 +V OUT 4 OUT COM 5 -V OUT 6 CASE 7 CASE 8 CASE 9 SYNC 10 IN COM BOTTOM VIEW Figure 14 – Flanged, Solder Seal Package and Pinout (Dimensional Limits are ±0.005” Unless Otherwise Stated) 10021DSA 12 DVHV2800D Series PACKAGE SPECIFICATIONS (FLANGED, SEAM SEAL) TOP VIEW SIDE VIEW PIN FUNCTION 1 28V IN 2 INHIBIT 3 +V OUT 4 OUT COM 5 -V OUT 6 CASE 7 CASE 8 CASE 9 SYNC 10 IN COM BOTTOM VIEW Figure 15 – Flanged, Seam Seal Package and Pinout (/HB Screened Units Only) (Dimensional Limits are ±0.005” Unless Otherwise Stated) 10021DSA 13 DVHV2800D Series PACKAGE PIN DESCRIPTION Pin Function Description 1 28V IN Positive Input Voltage Connection 2 INHIBIT Logic Low = Disabled Output. Connecting the inhibit pin to input common causes converter shutdown. Logic High = Enabled Output. Unconnected or open collector TTL. 3 +V OUT Positive Output Voltage Connection 4 OUT COM Output Common Connection 5 -V OUT Negative Output Voltage Connection 6 CASE Case Connection 7 CASE Case Connection 8 CASE Case Connection 9 SYNC Synchronization Signal 10 IN COM Input Common Connection ENVIRONMENTAL SCREENING (Per MIL-STD-883 as referenced to MIL-PRF-38534, Class H) Screening MIL-STD-883 Standard (No Suffix) Extended /ES HB /HB · · Pre-Cap Inspection Method 2017, 2032 Internal Procedure Temperature Cycling Method 1010, Condition C Method 1010, -55°C to 125°C · Constant Acceleration Method 2001, Condition A Method 2001, 500g · Burn-In Method 1015, 160 hours at +125°C 96 hours at +125°C 24 hours at +125°C · Method 1014, Fine Leak, Condition A Method 1014, Gross Leak, Condition C -3 Dip (1 x 10 ) Hermeticity · · · · · 1 Final Electrical MIL-PRF-38534, Group A 100% at 25°C · · Final Inspection Method 2009 · · Note: 10021DSA 1. · · · · · · · 100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment. 14 DVHV2800D Series ORDERING INFORMATION DVHV 28 05 D F R /HB 1 2 3 4 5 6 7 - XXX 8 (1) (2) (3) (4) Product Series Nominal Input Voltage Output Voltage Number of Outputs DVHV 28 28 Volts 05 12 15 ± 5 Volts ± 12 Volts ± 15 Volts D Dual (5) (6) (7) (8) Package Option Rad-Hard Option Screening Code Additional Screening Code None R None /ES /HB None F Non-Flanged Flanged Standard 100 kRad Standard Extended HB Contact Sales Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional environmental screening and testing, different input voltage, output voltage, power requirement, source inspection, and/or special element evaluation for space or other higher quality applications. CONTACT INFORMATION To request a quotation or place an order please contact your sales representative or the VPT Inc. Sales Department at: Phone: Fax: E-mail: (425) 487-4850 (425) 487-4802 [email protected] All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors or omissions. The products or specifications contained herein are subject to change without notice. 10021DSA 15