FUJITSU SEMICONDUCTOR DATA SHEET DS04-23118-2E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 to 1000 MHz) F5CE Series (D2 type) ■ DESCRIPTION The F5CE-D2 series of SAW bandpass filters apply to the frequency range 700 to 1000 MHz. These filters make it possible to provide high stopband attenuation and excellent passband flatness due to using unique DMS (Double Mode SAW) technology as design method. Moreover, these filters are provided in small 3.0 mm sq. package. This contributes to reduce weight and size of mobile communication units. The F5CE-D2 series of SAW filters are suitable for interstage RF filter in mobile communication systems in the frequency range 700 to 1000 MHz. Standard devices are available for AMPS/CDMA/TDMA, GSM, PDC800 and ISM900. ■ FEATURES • • • • • • Excellent stopband attenuation Low insertion loss and low passband ripple Ultra compact and light package (3.0 mm sq.) External matching circuits are not required. (50 Ω I/O) Surface mount package (SMT) Standard devices are available for mobile communication standards (AMPS/CDMA/TDMA, GSM, PDC800 and ISM900) ■ PACKAGE F5CE Series (D2 type) ■ PIN ASSIGNMENT (BOTTOM VIEW) 1 2 3 6 5 4 ■ PIN DESCRIPTION Pin no. Pin name Description 1 GND 2 IN 3 GND Ground Pin 4 GND Ground Pin 5 OUT Output Pin 6 GND Ground Pin Ground Pin Input Pin ■ ABSOLUTE MAXIMUM RATINGS Parameter Symbol Rating Unit Min. Max. Ta −30 +85 °C Tstg −40 +100 °C Input power PIN +15 dBm Input DC voltage −5 +5 V Operating temperature Storage temperature WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. 2 F5CE Series (D2 type) ■ RECOMMENDED OPERATING CONDITION Parameter Value Symbol Operating temperature Ta Min. Max. −30 +85 Unit °C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device’s electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. ■ STANDARD FREQUENCIES Center freq. (MHz) B/W (MHz) Part symbol Tx 950.0 20 30 FAR-F5CE-950M00-D230 Rx 820.0 20 31 FAR-F5CE-820M00-D231 Tx 836.5 25 32 FAR-F5CE-836M50-D232 Rx 881.5 25 33 FAR-F5CE-881M50-D233 Tx 902.5 25 34 FAR-F5CE-902M50-D234 Rx 947.5 25 35 FAR-F5CE-947M50-D235 Tx 897.5 35 41 FAR-F5CE-897M50-D241 Rx 942.5 35 63 FAR-F5CE-942M50-D263 915.0 7 38 FAR-F5CE-915M00-D238 915.0 26 36 FAR-F5CE-915M00-D236 System PDC800 AMPS /CDMA /TDMA GSM EGSM ISM900 Part number Remarks 3 F5CE Series (D2 type) ■ ELECTRICAL CHARACTERISTICS 1. PDC800 (Tx) Part number : FAR-F5CE-950M00-D230 Parameter Conditions (Ta = −30 °C to +85 °C) Value Min. Typ. Max. Unit Insertion loss 940 to 960 MHz 2.6 3.0 dB Inband ripple 940 to 960 MHz 0.7 1.2 dB DC to 680 MHz 50 66 dB 680 to 696 MHz 50 69 dB 810 to 830 MHz 50 66 dB 1015 to 1106 MHz 35 42 dB 1106 to 1700 MHz 50 59 dB 1700 to 2000 MHz 40 59 dB 940 to 960 MHz (9.5) 1.8 (10.9) 2.0 (dB) Absolute attenuation Inband VSWR (Return loss) Remarks 2. PDC800 (Rx) Part number : FAR-F5CE-820M00-D231 (Ta = −30 °C to +85 °C) Parameter Value Min. Typ. Max. Unit Insertion loss 810 to 830 MHz 2.5 3.0 dB Inband ripple 810 to 830 MHz 0.7 1.2 dB DC to 760 MHz 50 65 dB 855 to 875 MHz 28 30 dB 875 to 920 MHz 35 38 dB 920 to 1200 MHz 45 60 dB 1200 to 2000 MHz 40 47 dB 810 to 830 MHz (9.5) 1.7 (11.7) 2.0 (dB) Absolute attenuation Inband VSWR (Return loss) 4 Conditions Remarks F5CE Series (D2 type) 3. AMPS/CDMA/TDMA (Tx) Part number : FAR-F5CE-836M50-D232 (Ta = −30 °C to +85 °C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 824 to 849 MHz 2.7 3.5 dB Inband ripple 824 to 849 MHz 0.9 1.6 dB DC to 800 MHz 50 66 dB 869 to 1049 MHz 28 33 dB 1049 to 1200 MHz 50 60 dB 1200 to 2000 MHz 45 50 dB 824 to 849 MHz (9.5) 1.8 (10.9) 2.0 (dB) Absolute attenuation Inband VSWR (Return loss) Remarks 4. AMPS/CDMA/TDMA (Rx) Part number : FAR-F5CE-881M50-D233 (Ta = −30 °C to +85 °C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 869 to 894 MHz 2.7 3.5 dB Inband ripple 869 to 894 MHz 0.9 1.6 dB DC to 779 MHz 50 63 dB 779 to 849 MHz 45 50 dB 914 to 970 MHz 28 33 dB 970 to 1049 MHz 50 60 dB 1049 to 2000 MHz 40 50 dB 869 to 894 MHz (9.5) 1.7 (11.7) 2.0 (dB) Absolute attenuation Inband VSWR (Return loss) Remarks 5 F5CE Series (D2 type) 5. GSM (Tx) Part number : FAR-F5CE-902M50-D234 (Ta = −30 °C to +85 °C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 890 to 915 MHz 2.8 3.3 dB Inband ripple 890 to 915 MHz 0.8 1.4 dB DC to 845 MHz 50 60 dB 845 to 870 MHz 45 50 dB 925 to 935 MHz 5 18 dB 935 to 980 MHz 28 33 dB 980 to 1200 MHz 50 60 dB 1200 to 3000 MHz 30 40 dB 890 to 915 MHz (9.0) 1.7 (11.7) 2.1 (dB) Absolute attenuation Inband VSWR (Return loss) Remarks 6. GSM (Rx) Part number : FAR-F5CE-947M50-D235 (Ta = −30 °C to +85 °C) Parameter Value Min. Typ. Max. Unit Insertion loss 935 to 960 MHz 2.7 3.3 dB Inband ripple 935 to 960 MHz 0.7 1.4 dB DC to 871 MHz 50 66 dB 890 to 915 MHz 30 40 dB 980 to 1025 MHz 25 34 dB 1025 to 2000 MHz 45 48 dB 2000 to 3000 MHz 30 33 dB 935 to 960 MHz (9.0) 1.9 (10.2) 2.1 (dB) Absolute attenuation Inband VSWR (Return loss) 6 Conditions Remarks F5CE Series (D2 type) 7. EGSM (Tx) Part number : FAR-F5CE-897M50-D241 (Ta = −30 °C to +85 °C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 880 to 915 MHz 3.6 4.5 dB Inband ripple 880 to 915 MHz 1.8 2.7 dB DC to 845 MHz 50 55 dB 925 to 980 MHz 10 14 dB 980 to 1200 MHz 40 54 dB 1200 to 2100 MHz 35 50 dB 2100 to 3000 MHz 25 32 dB 880 to 915 MHz (5.6) 2.7 (6.8) 3.2 (dB) Absolute attenuation Inband VSWR (Return loss) Remarks 8. EGSM (Rx) Part number : FAR-F5CE-942M50-D263 (Ta = −30 °C to +85 °C) Parameter Conditions Value Unit Remarks 4.2 dB Ta = −30 °C to +85 °C 3.1 3.5 dB Ta = +15 °C to +35 °C Min. Typ. Max. 3.1 Insertion loss 925 to 960 MHz Inband ripple 925 to 960 MHz 1.2 2.0 dB DC to 871 MHz 50 62 dB 890 to 915 MHz 15 23 dB 980 to 1025 MHz 23 32 dB 1025 to 2000 MHz 40 45 dB 2000 to 3000 MHz 20 33 dB 925 to 960 MHz (6.0) 1.7 (11.7) 3.0 (dB) Absolute attenuation Inband VSWR (Return loss) 7 F5CE Series (D2 type) 9. ISM900 (7 MHz Bandwidth) Part number : FAR-F5CE-915M00-D238 (Ta = −30 °C to +85 °C) Parameter Conditions Value Min. Typ. Max. Unit Insertion loss 911.5 to 918.5 MHz 3.2 3.5 dB Inband ripple 911.5 to 918.5 MHz 0.3 1.0 dB DC to 600 MHz 50 66 dB 600 to 840 MHz 40 35 dB 869 to 894 MHz 35 40 dB 970 to 1500 MHz 40 45 dB 1500 to 3000 MHz 25 28 dB 911.5 to 918.5 MHz (9.5) 1.8 (10.9) 2.0 (dB) Absolute attenuation Inband VSWR (Return loss) Remarks 10. ISM900 (26 MHz Bandwidth) Part number : FAR-F5CE-915M00-D236 (Ta = −30 °C to +85 °C) Parameter Value Min. Typ. Max. Unit Insertion loss 902 to 928 MHz 2.6 3.5 dB Inband ripple 902 to 928 MHz 0.9 2.0 dB DC to 800 MHz 50 70 dB 800 to 880 MHz 45 57 dB 950 to 1080 MHz 28 31 dB 1080 to 2000 MHz 45 60 dB 2000 to 3000 MHz 25 38 dB 902 to 928 MHz (8.1) 1.7 (11.7) 2.3 (dB) Absolute attenuation Inband VSWR (Return loss) 8 Conditions Remarks F5CE Series (D2 type) ■ TYPICAL CHARACTERISTICS (STANDARD VERSION) 1. PDC800 (Tx) Part number : FAR-F5CE-950M00-D230 S21 log MAG 1 : −2.568 dB 940 MHz 2 : −2.342 dB 960 MHz 3 : −68.839 dB 810 MHz 4 : −39.73 dB 1015 MHz 10 dB/ 1 REF 0 dB 2 S11 1 U FS 1 : 52.076 Ω −11.529 Ω 4 14.686 pF 940 MHz 2 : 66.398 Ω −11.027 Ω 960 MHz 3 : 2.0508 Ω −57.342 Ω 810 MHz 4 : 12.441 Ω −84.324 Ω 1015 MHz 1 2 3 4 CENTER 950 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.2585 REF 1 3 4 3 CENTER 950 MHz S22 1 U FS SPAN 300 MHz 1 : 51.699 Ω −11.209 Ω 940 MHz 2 : 1.4082 960 MHz 3 : 58.55 810 MHz 4 : 15.631 1015 MHz 15.105 pF 940 MHz 2 : 64.738 Ω −8.7813 Ω 960 MHz 3 : 2.3711 Ω −56.83 Ω 810 MHz 4 : 18.398 Ω −84.547 Ω 1015 MHz 1 2 1 CENTER 950 MHz 4 2 SPAN 300 MHz CENTER 950 MHz 3 SPAN 300 MHz 9 F5CE Series (D2 type) 2. PDC800 (Rx) Part number : FAR-F5CE-820M00-D231 S21 10 dB/ 1REF 0 dB log MAG 2 1 : −2.451 dB 810 MHz 2 : −2.109 dB 830 MHz 3 : −63.906 dB 760 MHz 4 : −31.312 dB 1015 MHz S11 1 U FS 1 : 41.9 Ω 0.4043 Ω 4 1 2 79.439 pF 810 MHz 2 : 67.109 Ω −5.3945 Ω 830 MHz 3 : 3.4922 Ω −49.041 Ω 780 MHz 4 : 17.785 Ω −127.42 Ω 855 MHz 5 : 15.277 Ω −100.98 Ω 875 MHz 3 4 5 CENTER 820 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.1981 REF 1 4 5 3 CENTER 820 MHz S22 1 U FS 3 SPAN 300 MHz 1 : 37.752 Ω −4.1523 Ω 810 MHz 2 : 1.3628 830 MHz 3 : 28.125 760 MHz 4 : 21.387 855 MHz 5 : 21.387 875 MHz 1 2 4 1 CENTER 820 MHz 10 47.32 pF 810 MHz 2 : 65.793 Ω −4.418 Ω 830 MHz 3 : 3.6797 Ω −43.031 Ω 760 MHz 4 : 18.219 Ω −120.1 Ω 855 MHz 5 : 15.129 Ω −93.582 Ω 875 MHz 5 2 SPAN 300 MHz 3 CENTER 820 MHz SPAN 300 MHz F5CE Series (D2 type) 3. AMPS/CDMA/TDMA (Tx) Part number : FAR-F5CE-836M50-D232 S21 log MAG 10 dB/ 1REF 0 dB 2 1 : −2.643 dB 824 MHz 2 : −2.7135 dB 849 MHz 3 : −60.88 dB 800 MHz 4 : −34.243 dB 869 MHz S11 1 U FS 1 : 39.861 Ω 0.0938 Ω 4 1 18.108 pF 824 MHz 2 : 84.996 Ω −12.77 Ω 849 MHz 3 : 2.0156 Ω −29.858 Ω 800 MHz 4 : 18.031 Ω −140.37 Ω 869 MHz 2 3 4 CENTER 835 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.2555 REF 1 3 4 3 CENTER 835 MHz S22 1 U FS SPAN 300 MHz 1 : 40.059 Ω 2.375 Ω 824 MHz 2 : 1.7589 849 MHz 3 : 33.646 800 MHz 4 : 34.335 869 MHz 1 458.73 pF 824 MHz 2 : 84.547 Ω −10.078 Ω 849 MHz 3 : 2.1123 Ω −88.005 Ω 800 MHz 4 : 12.773 Ω −134.22 Ω 869 MHz 2 4 1 3 2 CENTER 835 MHz SPAN 300 MHz CENTER 835 MHz SPAN 300 MHz 11 F5CE Series (D2 type) 4. AMPS/CDMA/TDMA (Rx) Part number : FAR-F5CE-881M50-D233 S21 log MAG 10 dB/ 1REF 0 dB 2 1 : −2.6219 dB 869 MHz 2 : −2.7063 dB 894 MHz 3 : −62.398 dB 849 MHz 4 : −33.178 dB 914 MHz S11 1 U FS 1 : 48.748 Ω −1.7109 Ω 4 1 107.05 pF 869 MHz 2 : 89.652 Ω −9.0273 Ω 894 MHz 3 : 2.2881 Ω −23.078 Ω 849 MHz 4 : 16.703 Ω −149.05 Ω 914 MHz 2 3 4 3 CENTER 880 MHz S11 SWR SPAN 300 MHz 1 / REF 1 4 3 1 : 1.0512 869 MHz 2 : 1.8203 894 MHz 3 : 26.584 849 MHz 4 : 31.784 914 MHz CENTER 880 MHz S22 1 U FS SPAN 300 MHz 1 : 48.572 Ω −660.16 mΩ 277.43 pF 869 MHz 2 : 88.297 Ω −7.6133 Ω 894 MHz 3 : 2..3965 Ω −21.153 Ω 849 MHz 4 : 14.922 Ω −139.78 Ω 914 MHz 1 2 4 1 CENTER 880 MHz 12 3 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz F5CE Series (D2 type) 5. GSM (Tx) Part number : FAR-F5CE-902M50-D234 S21 log MAG 10 dB/ 1 REF 0 dB 2 4 1 : −2.705 dB 890 MHz 2 : −2.512 dB 915 MHz 3 : −60.125 dB 869 MHz 4 : −32.472 dB 935 MHz 5 : −63.11 dB 980 MHz S11 1 U FS 1 : 54.355 Ω −3.2813 Ω 1 2 3 54.499 pF 890 MHz 2 : 73.234 Ω −8.75 Ω 915 MHz 3 : 2.377 Ω −21.645 Ω 869 MHz 4 : 16.141 Ω −154.23 Ω 935 MHz 5 : 9.9835 Ω −71.762 Ω 980 MHz 5 4 3 5 CENTER 900 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.1118 REF 1 4 3 CENTER 900 MHz S22 1 U FS SPAN 300 MHz 1 : 54.16 Ω −2.3867 Ω 5 890 MHz 2 : 1.5029 915 MHz 3 : 25.029 869 MHz 4 : 32.898 935 MHz 5 : 15.535 980 MHz 1 2 4 3 1 CENTER 900 MHz 2 74.925 pF 890 MHz 2 : 72.748 Ω −8.6719 Ω 915 MHz 3 : 2.3945 Ω −20.338 Ω 869 MHz 4 : 14.781 Ω −143.07 Ω 935 MHz 5 : 9.7883 Ω −88.281 Ω 980 MHz 5 SPAN 300 MHz CENTER 900 MHz SPAN 300 MHz 13 F5CE Series (D2 type) 6. GSM (Rx) Part number : FAR-F5CE-947M50-D235 S21 log MAG 10 dB/1 REF 0 dB 2 4 1 : −2.838 dB 935 MHz 2 : −2.811 dB 960 MHz 3 : −43.265 dB 915 MHz 4 : −31.174 dB 980 MHz 5 : −62.902 dB 1025 MHz 1 U FS S11 1 : 48.096 Ω −11.426 Ω 3 1 2 14.898 pF 935 MHz 2 : 87.012 Ω −15.473 Ω 960 MHz 3 : 3.3154 Ω −11.977 Ω 915 MHz 4 : 12.32 Ω −135.31 Ω 980 MHz 5 : 8.1797 Ω −65.523 Ω 1025 MHz 5 3 4 5 CENTER 950 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.2585 REF 1 4 3 CENTER 950 MHz S22 1 U FS SPAN 300 MHz 1 : 46.922 Ω −11.199 Ω 5 935 MHz 2 : 1.8212 960 MHz 3 : 16.035 915 MHz 4 : 33.99 980 MHz 5 : 16.709 1025 MHz 1 2 15.199 pF 935 MHz 2 : 86.348 Ω −15.438 Ω 960 MHz 3 : 3.269 Ω −11.102 Ω 915 MHz 4 : 12.32 Ω −133.48 Ω 980 MHz 5 : 8.2369 Ω −63.543 Ω 1025 MHz 3 4 1 2 CENTER 950 MHz 14 5 SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz F5CE Series (D2 type) 7. EGSM (Tx) Part number : FAR-F5CE-897M50-D241 S21 log MAG 10 dB/ REF 0 dB 1 3 2 4 1 : −2.0064 dB 894.75 MHz CH1Markers 2 : −3.6341 dB 880 MHz 3 : −2.7867 dB 915 MHz 4 : −14.206 dB 925 MHz 5 : −51.327 dB 980 MHz S11 1U FS 1 : 55.994 Ω −103.52 mΩ 2 : 30.457 Ω −11.510 Ω 880 MHz 3 : 55.008 Ω −9.2461 Ω 915 MHz 4 : 336.78 Ω −274.64 Ω 925 MHz 1 3 STOP 1050 MHz S11 SWR 1/ REF 1 1 : 1.1199 4 5 894.75 MHz 5 START 750 MHz S22 1U FS 5 : 7.3398 Ω −65.723 Ω 980 MHz 4 2 5 START 750 MHz 1.7184 nF 894.75 MHz STOP 1050 MHz 1 : 55.930 Ω −261.72 mΩ 2 : 1.7780 880 MHz 3 : 1.2217 915 MHz 4 : 11.646 925 MHz 5 : 18.674 980 MHz 679.65 pF 894.75 MHz CH1Markers 2 : 32.453 Ω −14.004 Ω 880 MHz 3 : 55.285 Ω −7.3574 Ω 915 MHz 1 4 3 2 4 : 444.31 Ω −235.81 Ω 925 MHz 5 : 7.3086 Ω −66.512 Ω 980 MHz 1 2 START 750 MHz 3 STOP 1050 MHz START 750 MHz 5 STOP 1050 MHz 15 F5CE Series (D2 type) 8. EGSM (Rx) Part number : FAR-F5CE-942M50-D263 S21 log MAG 10 dB/ REF 0 dB 1 1 : −3.1142 dB 925 MHz S11 1U FS 1 : 34.121 Ω 48.165 pF 925 MHz 2 : 57.764 Ω −7.1191 Ω 960 MHz 2 : −2.8163 dB 960 MHz 3 : −35.658 dB 915 MHz 4 : −31.673 dB 980 MHz 2 3 : 5.1411 Ω −3.1877 Ω 915 MHz 4 : 9.2109 Ω −107.8 Ω 980 MHz 1 4 3 −3.5723 Ω 2 3 4 SPAN 300 MHz CENTER 950 MHz S11 SWR 1/ REF 1 4 1 : 1.4805 925 MHz CENTER 950 MHz S22 1U FS SPAN 300 MHz 1 : 35.443 Ω −6.9688 Ω 2 : 54.803 Ω −9.3535 Ω 960 MHz 2 : 1.2177 960 MHz 3 : 9.8255 915 MHz 4 : 30.797 980 MHz 3 3 : 5.3423 Ω −2.3633 Ω 915 MHz 4 : 9.4063 Ω −108.32 Ω 980 MHz 1 3 1 CENTER 950 MHz 16 24.69 pF 925 MHz 2 4 2 SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz F5CE Series (D2 type) 9. ISM900 (7 MHz Bandwidth) Part number : FAR-F5CE-915M00-D238 S21 log MAG 10 dB/ 1 REF 0 dB 2 1 : −3.133 dB 912.5 MHz 2 : −3.011 dB 920.5 MHz S11 1 U FS 1 : 50.824 Ω 12.756 Ω 2.2248 pF 912.5 MHz 2 : 77.844 Ω 11 Ω 920.5 MHz 1 2 CENTER 915 MHz S11 SWR SPAN 300 MHz 1 / REF 1 1 : 1.2879 CENTER 915 MHz S22 1 U FS SPAN 300 MHz 1 : 50.184 Ω 13.977 Ω 912.5 MHz 2 : 1.6094 920.5 MHz 2.4377 pF 912.5 MHz 2 : 74.648 Ω 11.52 Ω 920.5 MHz 1 2 1 2 CENTER 915 MHz SPAN 300 MHz CENTER 915 MHz SPAN 300 MHz 17 F5CE Series (D2 type) 10. ISM900 (26 MHz Bandwidth) Part number : FAR-F5CE-915M00-D236 S21 log MAG 10 dB/ 1 REF 0 dB 2 4 1 : −2.4997 dB 902 MHz S11 1U FS 1 : 42.717 Ω −1.4512 Ω 121.59 pF 902 MHz 2 : 85.512 Ω −8.3164 Ω 928 MHz 2 : −2.5671 dB 928 MHz 3 : −61.414 dB 880 MHz 4 : −33.762 dB 950 MHz 3 : 2.4141 Ω −28.497 Ω 880 MHz 4 : 12.734 Ω −135.52 Ω 950 MHz 1 2 3 4 SPAN 300 MHz CENTER 915 MHz S11 SWR 1/ REF 1 3 4 1 : 1.2013 902 MHz 3 CENTER 915 MHz S22 1U FS SPAN 300 MHz 1 : 42.037 Ω −2.6191 Ω 67.368 pF 902 MHz 2 : 85.066 Ω −10.973 Ω 928 MHz 2 : 1.7442 928 MHz 3 : 28.381 880 MHz 4 : 32.443 950 MHz 3 : 2.3496 Ω −28.755 Ω 880 MHz 4 : 12.492 Ω −132.72 Ω 950 MHz 1 2 4 1 2 CENTER 915 MHz 18 SPAN 300 MHz 3 CENTER 915 MHz SPAN 300 MHz F5CE Series (D2 type) ■ MEASURING CIRCUIT 2 5 1 3 4 6 1 to 6 : Pin numbers ■ PART NUMBER DESIGNATION [Designation example] FAR–F5CE– M (1) –D2 – (2) (3) (1) Frequency designation : Specify the nominal frequency in six alphanumeric characters. Enter M (for MHz) at the decimal point. Refer to standard frequencies. [Example] (2) Serial number 836.5 MHz → 836M50 : Specify a characters from 01 to 99. Refer to standard frequencies. (3) Packing (Reeled tape) : Y : 1 kpcs/reel X : 5 kpcs/reel ■ MARKING LOGO DATE CODE PART SYMBOL LOT No. INDEX 19 F5CE Series (D2 type) ■ PACKAGE DIMENSION 1.2 MAX 3.0 3.0 2−R 0.2 2 3 1.5 0.75 1 6 5 4 0.75 0.4 0.6 4−R 0.3 1.2 1.2 Dimensions in mm 20 F5CE Series (D2 type) ■ RECOMMENDED LAND PATTERN 1.5 3.0 0.75 0.95 3.0 0.2 0.75 1.5 0.70 1.20 1.20 Dimensions in mm 21 F5CE Series (D2 type) ■ PACKING : Reel type 1. Reel Dimensions 9.5 ± 0.5 1.5 Min. φ250 φ80 φ12.8 Min. φ20.2 Min. R0.58 Type Volume Y 1 k pcs X 5 k pcs 13.8 Max. Dimensions in mm 2. Packing Style Reel side Pulling side #1PIN Pulling side 22 F5CE Series (D2 type) 3. Tape Dimensions 0.3 ± 0.05 0.1 3.3 ± 0.1 3.5 ± 0.05 φ1.5 ± 0.0 φ1.0 Min. 3.3 ± 0.1 8.0 ± 0.2 2.0 ± 0.05 1.75 ± 0.1 4.0 ± 0.1 1.3 ± 0.1 4.0 ± 0.1 Dimensions in mm 4. Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA) Direction of pulling Speed 300 mm/min 165 to 180 ° Embossment carrier type tape 23 F5CE Series (D2 type) ■ RECOMMENDED REFLOW PROFILE 240 Temperature (°C) 10 s Heating rate 1 to 4 °C/s 210 Air cooling 60 s Pre-Heating 150 60 ∼ 90 s Time (s) ■ NOTE A mass-produced product order is accepted by a unit of 1000. 24 F5CE Series (D2 type) FUJITSU MEDIA DEVICES LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International Sales & Marketing DEPT. Shin-Yokohama Square Bldg.,14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076 http://edevice.fujitsu.com/fmd/ North and South America FUJITSU MEDIA DEVICES OF AMERICA, INC. 1731 Technology Drive,Suite 800, San Jose, CA 95110 U.S.A. Tel: (1)-408-437-8900 Fax: (1)-408-437-0700 http://www.fujitsumedia.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU MEDIA DEVICES is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0104 FUJITSU LIMITED Printed in Japan