ETC G3R-OD201SN

9
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with
High Dielectric Strength
Requirements
1 High-speed models with optimum input
ratings for a variety of sensors are
available
1 Input Modules and Output Modules that
have the same footprint as the G2R
1 Using a coupler approved by VDE 0884
and assuring an I/O dielectric strength
of 4 kV
èòð
1 Incorporating an easy-to-see monitoring
indicator
1 Approved by UL, CSA, and TÜV
1 Can be used with P2RF--05E socket for
use on 35 mm DIN track
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
3 INPUT MODULE
Isolation
Photocoupler
Indicator
Yes
Response speed
---
Logic level
Rated input
Supply voltage
Supply current
voltage
4 to 32 VDC
0.1 to 100 mA
Part number
100 to 240 VAC
G3R-IAZR1SN
High-speed
g
(1 kHz)
kH )
5 VDC
G3R-IDZR1SN
Low-speed
(10 Hz)
H )
5 VDC
12 to 24 VDC
G3R-IDZR1SN-1
12 to 24 VDC
3 OUTPUT MODULE
Isolation
Indicator
Zero cross
function
Applicable output
load
Rated input
Part number
Phototriac
Yes
Yes
2 A at 75 to 264 VAC
5 to 24 VDC
G3R-OA202SZN
No
Photocoupler
Note:
---
G3R-OA202SLN
2 A at 4 to 60 VDC
G3R-ODX02SN
1.5 A at 40 to 200
VDC
G3R-OD201SN
When ordering a TÜV approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU.
G3R-I/O
G3R-I/O
3 I/O INDICATION
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Mark indication
Specification
AC IN
Input module, AC input
DC IN
Input module, DC input
AC OUT
Output module, AC output
DC OUT
Output module, DC output
Mark attached to the top of the product
Specifications
3 RATINGS
Input Module
Input
Part number
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-IAZR1SN
100 to 240 VAC
60 to 264 VAC
15 mA max.
60 VAC max.
20 VAC min.
G3R-IDZR1SN
5 VDC
4 to 6 VDC
8 mA max.
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
5 VDC
4 to 6 VDC
4 VDC max.
1 VDC min.
12 to 24 VDC
6.6 to 32 VDC
6.6 VDC max.
3.6 VDC min.
Part number
Logic level supply voltage
Logic level supply current
G3R-IAZR1SN
4 to 32 VDC
0.1 to 100 mA
G3R-IDZR1SN-1
Output
G3R-IDZR1SN
G3R-IDZR1SN-1
13
G3R-I/O
G3R-I/O
3 OUTPUT MODULE
Input
Part number
Rated voltage
Operating voltage
Input current
Must operate
voltage
Must release
voltage
G3R-OA202SZN
5 to 24 VDC
4 to 32 VDC
15 mA max.
( t 25°C)
(at
4 VDC max.
1 VDC min.
G3R-OA202SLN
G3R-ODX02SN
8 mA max.
G3R-OD201SN
Output
Part number
Load voltage
Load current (See Note)
Inrush current
G3R-OA202SZN
75 to 264 VAC
0.05 to 2 A
30 A (60 Hz, 1 cycle)
G3R-ODX02SN
4 to 60 VDC
0.01 to 2 A
8 A (10 ms)
G3R-OD201SN
40 to 200 VDC
0.01 to 1.5 A
8 A (10 ms)
G3R-OA202SLN
Note:
The minimum current value is measured at 10°C min.
Characteristics
3 INPUT MODULE
Item
G3R-IAZR1SN
G3R-IDZR1SN
G3R-IDZR1SN-1
Operate time
20 ms max.
0.1 ms max.
15 ms max.
Release time
20 ms max.
0.1 ms max.
15 ms max.
Response frequency
10 Hz
1 kHz
10 Hz
Output ON voltage drop
1.6 V max.
Leakage current
5 µA max.
Insulation resistance
100 MΩ min. between input and output
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
1,000 m/s2 {approx. 100G}
Ambient temperature
Operating: --30°C to 80°C (with no icing)
Storage: --30°C to 100°C (with no icing)
Approved standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Operating: 45% to 85%
Weight
Approx. 18 g
14
G3R-I/O
G3R-I/O
3 OUTPUT MODULE
Item
G3R-OA202SZN
G3R-OA202SLN
G3R-ODX025N
Operate time
1/2 of load power source cycle + 1 ms max.
1 ms max.
Release time
1/2 of load power source cycle + 1 ms max.
2 ms max.
Response frequency
20 Hz
100 kHz
Output ON voltage drop
1.6 V max.
Leakage current
1.5 mA max.
Insulation resistance
100 MΩ min. between input and output
Dielectric strength
4,000 VAC, 50/60 Hz for 1 min between input and output
Vibration resistance
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
1,000 m/s2 {approx. 100G}
Ambient temperature
Operating: --30°C to 80°C (with no icing)
Storage: --30°C to 100°C (with no icing)
Approved standards
UL508 File No. E64562
CSA C22.2 (No. 14, No. 950) File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity
Operating: 45% to 85%
Weight
Approx. 18 g
G3R-OA201SN
2.5 V max.
1 mA max.
Engineering Data
Load Current vs. Ambient Temperature
Characteristics
G3R-ODX02SN (4 to 60 VDC)
4-point mounting (see note 1)
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0.7
0.5
--30 --20
0
20 30 40 55 60
4-point mounting (see note 1)
2
80
Load current (A)
Load current (A)
2
2
16-point mounting (see note 2)
1.5
1.4
Single-point
mounting
1
0.5
--30 --20
100
0
20
40 55 60
80
4-point mounting (see note 1)
1.5
1.1
1
0.6
0.5
--30 --20
100
Single-point
mounting
16-point
mounting
(see note 2)
Ambient temperature (°C)
Ambient temperature (°C)
Note:
G3R-OD201SN (40 to 200 VAC)
Load current (A)
G3R-OA202SZN/OA202SLN
0
20
40 55 60
80
100
Ambient temperature (°C)
1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
G3R-OA202SZN/OA202SLN
G3R-ODX02SN
20
10
10
9
9
8
8
Inrush current (A)
Inrush current (A)
Inrush current (A)
30
G3R-OD201SN
10
7
6
5
4
3
2
30 50 100 200 500 1000
Energizing time (ms)
5000
0
10
6
5
4
3
2
1
1
10
7
30 50
100
300 500 1000 2000
Energizing time (ms)
0
10
30 50
100
300 500 1000 2000
Energizing time (ms)
15
G3R-I/O
G3R-I/O
Operation
3 PRECAUTION OF MOUNTING OUTPUT MODULES
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
G3R
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
G3R
G3R
Dimensions
Unit: mm (inch)
3 G3R
Terminal Arrangement/
Internal Connections
(Bottom View)
1
5.2
3
0.5
29 max.
1
28 max.
5
(--)
17.4
4.75
13 max.
(+)
4
9.6
7.5
3
4
Load
5
4.7
Input
0.5 4.75
4
10
1
5
(--)
(+)
2
20
3 CONNECTING SOCKETS
G3RZ Relay
P2RF-05-E
M3.5 screw
59 max.
48 max.
3.2-dia. hole
PFRF-05-E
Socket
3.5-dia.
hole
62.5 **
(66.5)***
85.5 max.
M3 or 3.5-dia. hole
61 max.
16
**
Indicates a value when using the PFP-PN
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the PFP-PN2.
*** Indicates a value when using the PFP-PN
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-PN2.
G3R-I/O
G3R-I/O
P2R-057P
14 max.
Five, 1.6-dia. hole
G3RZ Relay
32 max.
P2R-057P Socket
41 max.
3 SOCKET MOUNTING PLATE
Use the Socket Mounting Plate when arranging several Sockets in a row.
R2.25
10 ellipses
Square hole
G70A I/O Block Base
3 ORDERING INFORMATION
Classification
Internal I/O circuit common
Rated voltage
Model
Output
NPN (+ common)
24 VDC
G70A-ZOC16-3
PNP (-- common)
24 VDC
G70A-ZOC16-4
NPN/PNP
110 VDC max., 240 VAC max.
(see note)
G70A-ZIM16-5
Input
Note:
Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
17
G3R-I/O
G3R-I/O
Dimensions
Note:
All units are in millimeters unless otherwise indicated.
G70A-ZOC16 (Output)
234
64
+0.2
35.3 --0
75
28.6
M3.5
9.2 19.6
20.7
34.2
48.7
G70A-ZIM16 (Input)
234
48.7
10.2
+0.2
35.3 --0
75
M3.5
9.2 19.6
20.7
34.2
54
18
G3R-I/O
G3R-I/O
Installation
3 TERMINAL ARRANGEMENT/INTERNAL CONNECTION
G70A-ZOC16-3 (NPN)
-+
-+
Connector Terminal
Arrangement
(Top View)
G70A-ZOC16-4 (PNP)
-+
-+
Connector Terminal
Arrangement
(Top View)
19
G3R-I/O
G3R-I/O
G70A-ZIM16-5 (NPN/PNP)
1A1
-+
-+
2A1
1A2
COM.
3A1
2A2
4A1
3A2
5A1
4A2
6A1
5A2
7A1
6A2
8A1
7A2
9A1
8A2
10A1
9A2
11A1
10A2
12A1
11A2
13A1
12A2
14A1
13A2
15A1
14A2
16A1
15A2
16A2
Connector Terminal
Arrangement
(Top View)
Precautions
Refer to pages NO TAG to NO TAG for general precautions.
3 CONNECTION
With the SSR for DC switching, the load can be connected to
either positive or negative output terminal of the SSR.
3 PROTECTIVE ELEMENT
Since the SSR does not incorporate an overvoltage absorption
component, be sure to connect an overvoltage absorption
component when using the SSR under an inductive load.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
9
OMRON ELECTRONICS, INC.
OMRON CANADA, INC.
One East Commerce Drive
Schaumburg, IL 60173
885 Milner Avenue
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. GC RLY7
01/00
Specifications subject to change without notice.
Printed in U.S.A.