Ordering number:ENN5033 NPN Triple Diffused Planar Silicon Transistor HPA251R Ultrahigh-Definition CRT Display Horizontal Deflection Output Applications Features Package Dimensions unit:mm 2111A [HPA251R] 20.0 5.0 20.7 3.0 2.0 26.0 · High speed (tf typ=100ns). · High breakdown voltage (VCBO=1500V). · High-speed damper diode placed in one package (tfr=0.2µs max). · Adoption of MBIT process. · High reliability (adoption of HVP process). 1.75 2.9 1.0 1.2 0.6 1 3 5.45 3.1 2.8 5.45 2 5.45 Specifications 5.45 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3JML Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 1500 V Collector-to-Emitter Voltage VCEO VEBO 800 V 6 V IC 25 A ICP 50 A IO 16 A Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Diode Forward Current Diode Forward Current (Pulse) IOP PW≤100µs, duty≤50% Total Power Dissipation Tc=25°C Junction Temperature PT Tj Storage Temperature Tstg 25 A 120 W 150 ˚C –55 to +150 ˚C Electrical Characteristics at Ta = 25˚C Parameter Symbol Collector Cutoff Current Collector Sustain Voltage Emitter Cutoff Current Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Conditions ICBO VCB=1500V, IE=0 VCEO(sus) IC=100mA, IB=0 IEBO VEB=4V, IC=0 VCE(sat) IC=16A, IB=4A VBE(sat) Ratings min typ Unit max 5 mA 1.0 mA 800 V IC=16A, IB=4A 5 V 1.5 V Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 82599TH (KT)/31495MO (KOTO) BX-1462 No.5033–1/4 HPA251R Continued from preceding page. Parameter Symbol hFE(1) hFE(2) DC Current Gain Storage Time VCE=5V, IC=1.0A VCE=5V, IC=16A tstg IC=12A, IB1=2.4A, IB2=–4.8A tf IC=12A, IB1=2.4A, IB2=–4.8A Fall Time VF(1) Diode Forward Voltage Conditions VF(2) Ratings min typ 8 4* 10* 0.1 IF=16A IF=25A Diode Reverse Recovery Time trr IF=–IR=100mA Diode Forward Recovery Time tfr IF=100mA Unit max 0.1 3.0 µs 0.2 µs 3 V 5 V 1.5 µs 0.2 µs * : The HPA251R is classified by 16A hFE as follows : 4 2 6 5 3 8 7 4 10 Switching Time Test Circuit No.5033–2/4 HPA251R No.5033–3/4 HPA251R Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 1999. Specifications and information herein are subject to change without notice. PS No.5033–4/4