ETC OPI1264D

OPI 1264
Series
Optically Coupled Isolators
BASEEFA & ATEX CERTIFIED
The OPI1264A/B/C/D are a family of
optically coupled isolators, each consisting of
a infrared light emitting diode, coupled to an
NPN silicon phototransistor sealed in an
injection moulded plastic housing. This series
is designed for applications requiring high
voltage isolation between input and output.
All electrical parameters are 100% tested by
manufacturing. Specifications are guaranteed
to a 0.65% AQL
•
10KV electrical rating
•
High current transfer ratio-100% [email protected]
1m
•
Designed and manufactured to
EN50020 1995 and EN50014 1998
BASEEFA CERTIFIED
BAS No. Ex89C2096UEExiaIIC
ATEX CERTIFIED
BAS01ATEX1278U
MECHANICAL DATA
13.9
12.7
7.62 min
5.84
5.59
LED Anode Polarity(Pin1)
Marking Slot
(1)
(4)
2.54
(3)
(2)
Ø6.6
6.1
(1)
(4)
(2)
(3)
CONDITION OF USE APPLY
EN50020 1994 CLAUSES
6..4.9 AND 8.8
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
1/4
ISS E 13.03.02
ABSOLUTE MAXIMUM RATINGS (25 °C unless otherwise noted)
INPUT DIODE
FORWARD DC CURRENT
REVERSE DC VOLTAGE
OUTPUT PHOTOTRANSISTOR
COLLECTOR-EMITTER VOLTAGE
EMITTER-COLLECTOR VOLTAGE
OPI126
50mA (3)
2V
30 V
5V
OPERATING TEMP
-40OC TO +85OC
STORAGE TEMP
-40OC TO +85OC
INPUT-TO-OUTPUT ISOLATION VOLTAGE
LEAD S0LDERING TEMP (2) 1.6mm from case for 5sec with
+10KV DC (1)
240OC
NOTES
1
Measured with input diode leads shorted together and output leads shorted
together.
2
RMA Flux is recommended. Duration can be extended to 10 sec. max. when flow
soldering.
3
Derate linearly 0.73 mA/OC above 25OC
4
Derate linearly 1.67 mW/OC above 25OC
5
Derate linearly 1.67 mW/OC above 25OC
Whilst the devices are capable of operating continually at the noted elevated
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
2/4
ISS E 13.03.02
OPI126
OPTO ELECTRONIC DATA (TA = 25OC)
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
TEST CONDISTIONS
INPUT DIODE
Forward Voltage
VF
1.5
V
If = 20mA
Reverse Current
IR
100
ìA
Vr = 2V
OUTPUT PHOTOTRANSISTOR
Collector-Emitter Breakdown Volt-
V(BR)CEO
30
V
Ic = 1mA If = 0
Emitter-Collector Breakdown Volt-
V(BR)ECO
5
V
Ie = 100ì A
nA
Vce = 10V
Collector-Emitter Dark Current
ICEO
100
COUPLED CHARACTERISTICS
DC Current transfer ratio
IC/IF
OPI 1264A
25
%
If=10mA, Vce=5V
OPI 1264B
50
%
If=10mA, Vce=5V
OPI 1264C
100
%
If=10mA, Vce=5V
OPI 1264D
100
%
If=1mA, Vce=5V
10
KV
See Note
V
If=10mA,
VISO
Isolation Voltage
Collector-emitter saturation voltage
VCE(SAT)
0.4
Turn-on time
t on
5
ìS
Ic=10mA,
Vcc=10V,
Turn-off time
t off
5
ìS
Ic=10mA,
Vcc=10V,
NOTE:
Measured with input diode leads shorted together and output leads shorted together.
(Sample testing only).
OPTO ELECTRONIC SOLUTIONS
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
3/4
ISS E 13.03.02
ESSENTIAL HEALTH AND SAFETY INFORMATION IN ACCORDANCE WITH ATEX DIRECTIVE 94/9/EC
INFORMATION CONTAINED IN THIS DATASHEET IS
DEEMED TO CONFORM TO THE ABOVE DIRECTIVE
AND IS SUPPLIED IN RELATION TO THE FOLLOWING
SHIPMENT: -
CUSTOMER____________________
ORDER NUMBER________________
INVOICE NUMBER_______________
TYPE NUMBER__________________
QUANTITY______________________
BATCH NUMBER_________________
DATE CODE_____________________
DATE OF SHIPMENT______________
4
ISS E 13.03.02