Integrated Circuits Package Information Latest changes to this document - November 2003 Q1 - 64-Lead VQFN package information amended S1, S2 and S3 packages removed Publication No: D/Packs/17 November 2003 1 2 CML Microcircuit Package Information D E J 28-pin SOIC 28-pin TSSOP 14-pin cerdip L 24-lead PLCC M P 28-lead CLCC 8-pin PDIP 1 DW 24-pin SOIC J 24-pin TSSOP DW TN 16-pin cerdip LG 24-lead PLCC P M1 14-pin PDIP 2 20-pin SOIC 20-pin TSSOP J LH LS 22-pin cerdip 28-lead PLCC P 16-pin PDIP 3 J LH 8 DW 16-pin SOIC 16-pin TSSOP 24-pin cerdip P LH 48-lead LQFP 24-pin PDIP 4 J DW 24-pin SSOP 28-pin cerdip P 24-lead PLCC 40-pin PDIP 5 DS J 28-pin SSOP L 44-lead PLCC 22-pin PDIP 6 44-lead LQFP 7 Q1 100-lead LQFP 8 64-lead LQFP 9 3 64-lead VQFN CML Microcircuit Package Information ...... 28-Pin Plastic S.O.I.C., DW (D1) DIM. A * * B ALTERNATIVE PIN LOCATION MARKING E W L PIN 1 X Y C K1 H T K P J A B C E F H J K K1 L P T W X Y TYP. MIN. MAX. 0.697 (17.70) 0.711 (18.06) 0.286 (7.26) 0.299 (7.59) 0.088 (2.24) 0.105 (2.67) 0.390 (9.90) 0.419 (10.64) 0.650 (16.51) 0.003 (0.08) 0.020 (0.51) 0.018 (0.46) 0.013 (0.33) 0.041 (1.04) 0.041 (1.04) 0.050 (1.27) 0.016 (0.41) 0.050 (1.27) 0.0125 (0.32) 0.009 (0.23) 45° 0° 10° 7° NOTE : F * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees Co-Planarity of leads within 0.004” (0.1mm) 24-Pin Plastic S.O.I.C., DW (D2) DIM. A * * B ALTERNATIVE PIN LOCATION MARKING E W L PIN 1 T X Y C K K1 H J F P A B C E F H J K K1 L P T W X Y TYP. MIN. MAX. 0.613 (15.57) 0.597 (15.16) 0.286 (7.26) 0.299 (7.59) 0.093 (2.36) 0.105 (2.67) 0.390 (9.90) 0.419 (10.64) 0.550 (14.1) 0.003 (0.08) 0.020 (0.51) 0.020 (0.51) 0.013 (0.33) 0.041 (1.04) 0.041 (1.04) 0.050 (1.27) 0.016 (0.41) 0.050 (1.27) 0.0125 (0.32) 0.009 (0.23) 45° 10° 0° 7° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees Co-Planarity of leads within 0.004” (0.1mm) 4 CML Microcircuit Package Information ...... 20-Pin Plastic S.O.I.C., DW (D3) DIM. A * * B ALTERNATIVE PIN LOCATION MARKING E W L PIN 1 X Y K C K1 J H T F P A B C E F H J K K1 L P T W X Y MIN. TYP. MAX. 0.495 (12.57) 0.510 (12.95) 0.286 (7.26) 0.299 (7.59) 0.088 (2.24) 0.105 (2.67) 0.390 (9.90) 0.419 (10.64) 0.450 (11.43) 0.003 (0.08) 0.020 (0.51) 0.020 (0.51) 0.013 (0.33) 0.041 (1.04) 0.041 (1.04) 0.050 (1.27) 0.016 (0.41) 0.050 (1.27) 0.0125 (0.32) 0.009 (0.23) 45° 10° 0° 7° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees Co-Planarity of leads within 0.004” (0.1mm) 16-Pin Plastic S.O.I.C., DW (D4) DIM. A * * B ALTERNATIVE PIN LOCATION MARKING E L T PIN 1 X Y C K1 H W K P J F A B C E F H J K K1 L P T W X Y MIN. TYP. MAX. 0.395 (10.03) 0.413 (10.49) 0.286 (7.26) 0.299 (7.59) 0.088 (2.24) 0.105 (2.67) 0.390 (9.90) 0.419 (10.64) 0.350 (8.89) 0.003 (0.08) 0.020 (0.51) 0.020 (0.51) 0.013 (0.33) 0.041 (1.04) 0.041 (1.04) 0.050 (1.27) 0.016 (0.41) 0.050 (1.27) 0.0125 (0.32) 0.009 (0.23) 45° 10° 0° 7° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees Co-Planarity of leads within 0.004” (0.1mm) 5 CML Microcircuit Package Information ...... 24-Pin Plastic S.S.O.P. (D5) A Z * * E B L PIN 1 T X Y H J P F DIM. MIN. A B C E F H J L P T X Y Z 7.90 5.00 1.67 7.40 TYP. MAX. 8.50 5.60 2.00 8.20 7.15 0.05 0.22 0.55 0.65 0.21 0.38 0.95 0.25 8° 0.09 0° 7° 9° 4° 12° NOTE : C * A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees Co-Planarity of leads within 0.1mm 28-Pin Plastic S.S.O.P. (D6) A Z E B ALTERNATIVE PIN LOCATION MARKING * * L PIN 1 T X Y H J F P DIM. MIN. A B C E F H J L P T X Y Z 9.90 5.00 1.67 7.40 0.05 0.22 0.55 0.09 0° TYP. 8.45 MAX. 10.50 5.60 2.00 8.20 0.21 0.38 0.65 0.95 0.25 8° 7° 9° 4° 12° NOTE : C * A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees Co-Planarity of leads within 0.1mm 6 CML Microcircuit Package Information ...... 28-Pin Plastic T.S.S.O.P. (E1) A * * E B L PIN 1 T X Y C J H F * 9.60 4.30 -------6.30 0.05 0.17 0.45 8.45 0.65 0.08 0° MAX. 9.80 4.50 1.20 6.50 0.15 0.30 0.75 0.20 8° 12° A & B are reference data and do not include mold deflash or protrusions. (E2) * * E B L PIN 1 T X Y C F A B C E F H J L P T X Y TYP. All dimensions in mm Angles are in degrees A J MIN. NOTE : P 24-Pin Plastic T.S.S.O.P. H DIM. DIM. MIN. A B C E F H J L P T X Y 7.70 4.30 -------6.30 0.05 0.17 0.45 TYP. MAX. 7.90 4.50 1.20 6.50 7.15 0.15 0.30 0.75 0.65 0.20 8° 0.08 0° 12° NOTE : * P A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees 7 20-Pin Plastic T.S.S.O.P. (E3) DIM. A * * E B L PIN 1 T X Y C J H F * 0.05 0.17 0.45 5.85 6.60 4.50 1.20 6.50 0.15 0.30 0.75 0.65 0.20 8° 0.08 0° 12° A & B are reference data and do not include mold deflash or protrusions. (E4) * * E B L PIN 1 T X Y C F 6.40 4.30 -------6.30 MAX. All dimensions in mm Angles are in degrees A J TYP. NOTE : P 16-Pin Plastic T.S.S.O.P. H A B C E F H J L P T X Y MIN. DIM. MIN. A B C E F H J L P T X Y 4.90 4.30 -------6.30 0.05 0.17 0.45 TYP. MAX. 5.10 4.50 1.20 6.50 4.55 0.65 0.08 0° 0.15 0.30 0.75 0.20 8° 12° NOTE : * P A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees 8 CML Microcircuit Package Information ...... 14-Pin Cerdip DIL; J (J1) A DIM. Z E1 B M T PIN 1 K E K1 C H L J P J1 A B C E E1 F H J J1 K K1 L M P T Z MIN. TYP. MAX. 0.766 (19.46) 0.754 (19.15) 0.245 (6.22) 0.251 (6.38) 0.165 (4.19) 0.230 (5.84) 0.360 (9.14) 0.400 (10.16) 0.305 (7.75) 0.315 (8.00) 0.600 (15.24) 0.015 (0.38) 0.018 (0.46) 0.060 (1.52) 0.075 (1.91) 0.080 (2.03) 0.075 (1.91) 0.080 (2.03) 0.115 (2.92) 0.200 (5.08) 0.080 (2.03) 0.100 (2.54) 0.010 (0.25) 8° NOTE : All dimensions in inches (mm.) F Angles in degrees 16-Pin Cerdip DIL; J (J2) A K K1 H L J J1 E T M PIN 1 Z E1 B C P DIM. A B C E E1 F H J J1 K K1 L M P T Z MIN. TYP. MAX. 0.753 (19.13) 0.767 (19.48) 0.285 (7.24) 0.291 (7.39) 0.144 (3.66) 0.230 (5.84) 0.370 (9.40) 0.415 (10.54) 0.317 (8.05) 0.300 (7.62) 0.70 (17.78) 0.015 (0.38) 0.018 (0.46) 0.055 (1.40) 0.053 (1.35) 0.080 (2.03) 0.075 (1.91) 0.080 (2.03) 0.115 (2.92) 0.200 (5.08) 0.030 (0.76) 0.100 (2.54) 0.010 (0.25) 10° NOTE : F All dimensions in inches (mm.) Angles are in degrees 9 CML Microcircuit Package Information ...... 22-Pin Cerdip DIL; J (J3) A DIM. Z E1 B PIN1 E T M K K1 C H L J1 J P A B C E E1 F H J J1 K K1 L M P T Z TYP. MIN. MAX. 1.080 (27.43) 1.060 (26.92) 0.376 (9.55) 0.384 (9.75) 0.165 (4.19) 0.230 (5.84) 0.466 (11.84) 0.515 (13.08) 0.408 (10.36) 0.418 (10.62) 1.000 (25.40) 0.015 (0.38) 0.018 (0.46) 0.055 (1.40) 0.058 (1.47) 0.080 (2.03) 0.075 (1.91) 0.080 (2.03) 0.115 (2.92) 0.171 (4.34) 0.035 (0.89) 0.100 (2.54) 0.010 (0.25) 9° NOTE : All dimensions in inches (mm.) Angles are in degrees F 24-Pin Cerdip DIL; J (J4) A Z B E E1 T M PIN1 K K1 C H L J J1 P DIM. A B C E E1 F H J J1 K K1 L M P T Z TYP. MIN. MAX. 1.260 (32.00) 1.240 (31.50) 0.514 (13.06) 0.583 (14.81) 0.165 (4.19) 0.230 (5.84) 0.600 (15.24) 0.680 (17.27) 0.594 (15.09) 0.615 (15.62) 1.100 (27.94) 0.015 (0.38) 0.018 (0.46) 0.055 (1.40) 0.080 (2.03) 0.050 (1.27) 0.074 (1.88) 0.115 (2.92) 0.080 (2.03) 0.200 (5.08) 0.05 (1.27) 0.100 (2.54) 0.010 (0.25) 6° NOTE : F All dimensions in inches (mm.) Angles are in degrees 10 CML Microcircuit Package Information ...... 28-Pin Cerdip DIL; J (J5) A DIM. Z B T M PIN1 K K1 C H L J J1 E E1 P A B C E E1 F H J J1 K K1 L M P T Z TYP. MIN. MAX. 1.440 (36.58) 1.460 (37.08) 0.510 (12.95) 0.530 (13.46) 0.165 (4.19) 0.230 (5.84) 0.640 (16.26) 0.715 (18.16) 0.608 (15.44) 0.620 (15.75) 1.300 (33.02) 0.015 (0.38) 0.018 (0.46) 0.055 (1.40) 0.080 (2.03) 0.050 (1.27) 0.075 (1.91) 0.115 (2.92) 0.080 (2.03) 0.171 (4.34) 0.05 (1.27) 0.100 (2.54) 0.010 (0.25) 6° NOTE : F All dimensions in inches (mm.) Angles are in degrees 11 CML Microcircuit Package Information ...... 24-Pin PLCC; LG (L1) D A * * C P E1 G E B J K1 IDENT F (PIN 1) K L T H X W * Z DIM. A B C D E E1 F G H J K K1 L P T W X Z TYP. MIN. MAX. 0.390 (9.91) 0.390 (9.91) 0.404 (10.26) 0.404 (10.26) 0.098 (2.49) 0.616 (15.65) 0.616 (15.65) 0.524 (13.31) 0.250 (6.35) 0.250 (6.35) 0.004 (0.10) 0.022 (0.56) 0.018 (0.46) 0.055 (1.40) 0.045 (1.14) 0.033 (0.84) 0.031 (0.80) 0.039 (1.00) 0.049 (1.24) 0.051 (1.30) 0.006 (0.15) 0.009 (0.23) 45° 6° 6° NOTE : A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 24-Lead PLCC; LS (L2) C E B Y K DA W J E1 W H T PIN 1 K1 P G F DIM. * BA * C D E E1 F G H J K K1 P T W Y * MIN. TYP. MAX. 0.409 (10.40) 0.382 (9.70) 0.409 (10.40) 0.382 (9.70) 0.128 (3.25) 0.146 (3.70) 0.435 (11.05) 0.417 (10.59) 0.417 (10.59) 0.435 (11.05) 0.366 (9.30) 0.250 (6.35) 0.250 (6.35) 0.023 (0.58) 0.018 (0.46) 0.022 (0.56) 0.048 (1.22) 0.059 (1.50) 0.049 (1.24) 0.051 (1.30) 0.006 (0.15) 0.009 (0.23) 60° 30° 6° NOTE : A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 12 CML Microcircuit Package Information ...... 28-Lead PLCC; LH (L3) C E B Y K J E1 J1 D A W * * W T PIN 1 H P G A B C D E E1 F G H J J1 K P T W Y TYP. MIN. DIM. MAX. 0.456 (11.58) 0.450 (11.43) 0.456 (11.58) 0.450 (11.43) 0.180 (4.57) 0.165 (4.19) 0.510 (12.95) 0.470 (11.94) 0.510 (12.95) 0.470 (11.94) 0.423 (10.74) 0.300 (7.62) 0.300 (7.62) 0.020 (0.51) 0.013 (0.33) 0.021 (0.53) 0.031 (0.79) 0.060 (1.52) 0.075 (1.91) 0.050 (1.27) 0.010 (0.25) 45° 7° NOTE : * F A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 48-Pin LQFP (L4) D IDENT C A (PIN 1) DIM. * * P B E J * MAX. 7.11 7.11 1.60 9.25 9.25 0.15 0.28 0.76 6.91 6.91 1.00 8.74 8.74 0.05 0.10 0.35 0.50 0.13 0° 11° 7° 13° A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees Co-Planarity of leads within 0.1mm T L TYP. NOTE : Y X A B C D E H J L P T X Y MIN. H 13 CML Microcircuit Package Information ...... 24-Lead Straight PLCC; L (L5) D A C P B J DIM. A B C D E F G J K K1 P T W * * G E IDENT (PIN 1) F K1 K (PIN 1) MIN. TYP. MAX. 0.390 (9.91) 0.404 (10.26) 0.404 (10.26) 0.390 (9.91) 0.087 (2.21) 0.094 (2.39) 0.846 (21.49) 0.846 (21.49) 0.250 (6.35) 0.250 (6.35) 0.022 (0.56) 0.018 (0.46) 0.055 (1.40) 0.045 (1.14) 0.033 (0.84) 0.049 (1.24) 0.051 (1.30) 0.006 (0.15) 0.009 (0.23) 45° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees W T 44-Pin PLCC; LH (L6) C D K A N Y J IDENT B E J1 W PIN 1 H T M P DIM. * BA * C D E F G H J J1 K M N P T W Y G * TYP. MIN. 0.650 (16.51) 0.650 (16.51) 0.685 (17.40) 0.685 (17.40) MAX. 0.656 (16.66) 0.656 (16.66) 0.180 (4.57) 0.695 (17.65) 0.695 (17.65) 0.500 (12.7) 0.500 (12.7) 0.020 (0.51) 0.021 (0.53) 0.013 (0.33) 0.029 (0.74) 0.070 (1.78) 0.062 (1.57) 0.062 (1.57) 0.050 (1.27) 0.010 (0.25) 0.30 (7.62) x 45° 7° NOTE : A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees F 14 CML Microcircuit Package Information ...... 44-Lead LQFP; L7 D C A MIN. A B C D E H J L P T X Y 9.90 9.90 1.40 11.80 11.80 * * P E B DIM. J IDENT (PIN 1) Y MAX. 0.04 10.11 10.11 1.60 12.20 12.20 0.16 0.24 0.40 0.45 0.75 0.80 0.20 7° 14° 0.09 0° 10° NOTE : * Co-Planarity of leads within 0.1mm H L A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles in degrees T X TYP. 100-Lead LQFP; L8 D A 75 76 51 50 * * B E 100 1 26 25 IDENT (PIN 1) M J P DIM. MIN. A B C D E H J L M P T X 13.8 13.8 1.40 15.8 15.8 0.05 0.17 0.45 14.2 14.2 1.60 16.2 16.2 0.15 0.27 0.75 1.00 0.09 0.20 0° 7° NOTES : All dimensions in mm C Angles in degrees A & B are reference data and do not include mold deflash or protrusions. Each lead centerline is located within 0.08 mm of its true position (T.P.) at maximum material condition T L MAX. 0.50 * X TYP. H Co-Planarity of leads within 0.1mm 15 CML Microcircuit Package Information ...... 64-Lead LQFP; L9 D C A DIM. * * P B E J (PIN 1) TYP. MAX. 7.20 7.20 1.60 9.20 9.20 0.15 0.23 0.75 6.80 6.80 1.40 8.80 8.80 0.05 0.13 0.45 0.40 0.20 7° 13° 0.09 0° 11° NOTE : Y * H L A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees Co-Planarity of leads within 0.1mm T X A B C D E H J L P T X Y MIN. 28-Lead Ceramic CLCC; M1 C D A K L N BE J E1 J1 PIN 1 W H T M P G F DIM. A B C D E E1 F G H J J1 K L M N P T W MIN. TYP. Angles in degrees 16 MAX. 0.457 (11.6) 0.447 (11.35) 0.447 (11.35) 0.457 (11.6) 0.160 (4.07) 0.170 (4.32) 0.474 (12.05) 0.490 (12.45) 0.474 (12.05) 0.490 (12.45) 0.395 (10.03) 0.426 (10.82) 0.300 (7.62) 0.300 (7.62) 0.044 (1.12) 0.037 (0.94) 0.019 (0.48) 0.028 (0.71) 0.065 (1.65) 0.065 (1.65) 0.060 (1.5) 0.065 (1.65) 0.060 (1.5) 0.065 (1.65) 0.05 (1.27) 0.023 (0.59) 45° NOTE : All dimensions in inches (mm.) CML Microcircuit Package Information ...... 8-Pin Plastic DIL; P (P1) A Z E1 B J1 PIN1 T M K H L K1 P E Y C J DIM. * AB *C E E1 F H J J1 K K1 L M P T Y Z F * TYP. MIN. MAX. 0.346 (8.790) 0.400 (10.16) 0.240 (6.10) 0.260 (6.60) 0.145 (3.68) 0.200 (5.08) 0.300 (7.62) 0.390 (9.91). 0.290 (7.37) 0.325 (8.25) 0.30 (7.62) 0.030 (0.76) 0.015 (0.38) 0.023 (0.58) 0.045 (1.14) 0.065 (1.65) 0.062 (1.58) 0.062 (1.58) 0.121 (3.07) 0.150 (3.81) 0.029 (0.74) 0.100 (2.54) 0.008 (0.20) 0.015 (0.38) 7° 5° NOTE : A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 14-Pin Plastic DIL; P (P2) DIM. A Z B E1 E * AB *C J1 P F NOTE : PIN 1 T M K K1 C H L * TYP. MAX. 0.740 (18.80) 0.810 (20.57) 0.240 (6.10) 0.260 (6.60) 0.127 (3.23) 0.200 (5.08) 0.300 (7.62) 0.390 (9.91). 0.290 (7.37) 0.325 (8.26) 0.60 (15.24) 0.015 (0.38) 0.07 (1.78) 0.015 (0.38) 0.023 (0.58) E E1 F H J J1 K K1 L M P T Y Z Y J MIN. 0.045 (1.14) 0.065 (1.65) 0.056 (1.42) 0.064 (1.63) 0.056 (1.42) 0.064 (1.63) 0.121 (3.07) 0.150 (3.81) 0.072 (1.83) 0.100 (2.54) 0.008 (0.20) 0.015 (0.38) 7° 5° A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 17 CML Microcircuit Package Information ...... 16-Pin Plastic DIL; P (P3) DIM. A * AB *C Z B E1 E Y T M PIN 1 K K1 H L J J1 E E1 F H J J1 K K1 L M P T Y Z C P F MIN. TYP. MAX. 0.740 (18.80) 0.810 (20.57) 0.240 (6.10) 0.262 (6.65) 0.127 (3.23) 0.200 (5.08) 0.300 (7.62) 0.390 (9.91). 0.290 (7.37) 0.325 (8.26) 0.70 (17.78) 0.015 (0.38) 0.015 (0.38) 0.040 (1.02) 0.040 (1.02) 0.023 (0.58) 0.065 (1.65) 0.056 (1.42) 0.064 (1.63) 0.056 (1.42) 0.064 (1.63) 0.121 (3.07) 0.150 (3.81) 0.028 (0.71) 0.100 (2.54) 0.008 (0.20) 0.015 (0.38) 7° 5° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 24-Pin Plastic DIL; P (P4) A DIM. Z B E E1 *A * BC E E1 F H J J1 K K1 L M P T Y Z Y PIN1 T M K H L K1 C J J1 P F MIN. TYP. MAX. 1.200 (30.48) 1.270 (32.26) 0.500 (12.70) 0.555 (14.10) 0.142(3.61) 0.220 (5.59) 0.600 (15.24) 0.670 (17.02) 0.590 (14.99) 0.625 (15.88) 1.10 (27.94) 0.015 (0.38) 0.045 (1.14) 0.015 (0.38) 0.023 (0.58) 0.040 (1.02) 0.065 (1.65) 0.066 (1.68) 0.074 (1.88) 0.060 (1.52) 0.074 (1.88) 0.121 (3.07) 0.160 (4.06) 0.180 (4.58) 0.100 (2.54) 0.008 (0.20) 0.015 (0.38) 7° 4° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 18 CML Microcircuit Package Information ...... 40-Pin Plastic DIL; P (P5) A Z E E1 B DIM. Y PIN 1 K K1 H L J1 P F * * T M C J A B C E E1 F H J J1 K K1 L M P T Y Z MIN. TYP. MAX. 2.040 (51.82) 2.060 (52.32) 0.530 (13.46) 0.555 (14.10) 0.146 (3.71) 0.195 (4.95) 0.600 (15.24) 0.670 (17.02) 0.595 (15.11) 0.625 (15.88) 1.90 (48.26) 0.015 (0.38) 0.045 (1.14) 0.018 (0.46) 0.050 (1.27) 0.066 (1.68) 0.074 (1.88) 0.060 (1.52) 0.074 (1.88) 0.121 (3.07) 0.150 (3.81) 0.070 (1.79) 0.100 (2.54) 0.008 (0.20) 0.015 (0.38) 7° 3° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 22-Pin Plastic DIL (P6) A DIM. Z B E E1 * * Y PIN1 T M K H L K1 C J1 J P F A B C E E1 F H J J1 K K1 L M P T Y Z MIN. TYP. MAX. 1.10 (27.94) 1.080 (27.43) 0.330 (8.38) 0.360 (9.14) 0.146 (3.71) 0.200 (5.08) 0.388 (9.85) 0.490 (12.44) 0.390 (9.90) 0.420 (10.67) 1.0 (25.40) 0.020 (0.51) 0.045 (1.14) 0.015 (0.38) 0.022 (0.56) 0.040 (1.02) 0.065 (1.65) 0.066 (1.68) 0.076 (1.93) 0.060 (1.52) 0.076 (1.93) 0.114 (2.89) 0.162 (4.11) 0.047 (1.14) 0.100 (2.54) 0.006 (0.15) 0.015 (0.38) 20° 4° NOTE : * A & B are reference datum's and do not include mold deflash or protrusions. All dimensions in inches (mm.) Angles are in degrees 19 64-lead VQFN (Q1) A Index Area 1 DIM. C * * P B J Top View MIN. A B C F G G1 H J L M P T Y TYP. MAX. 9.00 BSC 9.00 BSC 0.80 7.00 7.00 1.00 7.95 7.95 0.225 0.05 0.30 0.50 0.00 0.18 0.30 0° 0.75 0.50 0.20 12° NOTE : * Y J C H G1 F T Exposed Metal Pad M A & B are reference data and do not include mold deflash or protrusions. All dimensions in mm Angles are in degrees Index Area 1 Index Area 2 G Bottom View Index Area 2 20 Dot L Dot Chamfer Index Area 1 is located directly above Index Area 2 Integrated Circuits Packaging for Despatch For ease and convenience CML products are packaged for despatch in industry standard bulk or individual packaging as described below. • Trays (17cm x 10.5cm) and cardboard boxes with conductive foam. • 50-pocket conductive trays for surface-mount microcircuits. • Anti-static coated tubes, of various sizes, with thumbplugs. • 13-inch reel Tape-and-Reel packaging which fully conforms to the EIC 286-3: 1991 specification. The conductive embossed tape provides a secure cavity sealed with a peel-back cover tape. 500/1,000 units/reel (see Tape and Reel, Section 6.6) – no partial reel counts are available. 21 Tape and Reel Specification ...... D1 to D6, L1 to L4, L6, L7, E1 to E4 10 pitches cumulative tolerance on tape = +/-0.2mm K0 t P2 P0 D E Top Cover Tape A0 F W B0 B1 P1 D1 centre lines of cavity Embossment User Direction of Feed Fig.1 S1/S2 10 pitches cumulative tolerance +/- 0.2mm t D P0 P2 E Top Cover Tape F B1 S D1 K0 Fig.1a P1 USER DIRECTION OF FEED 22 r d W ➤ Tape and Reel Specification ...... ➤ ➤ ➤ Fig.2 Tape Top and Bottom Orientation Direction of unreeling Start End Trailer (75 [min.] empty compartments) Components 40 (min.) 230mm (min.) empty compartments Leader Fig.3 Layout of Tape Minimum Bending Radius R ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ Fig.4 Reel Dimensions Fig.5 23 Tape Width (W) mm Bending Radius (R) Min mm 16 24 32 30 30 50 CML Microcircuit Soldering Profile for Surface Mount Products This information is currently being updated. Please contact CML for further information 24