Type 300 Digital Load Indicator ! Weight, Torque, Strain, Pressure Indicator ! Engineering Units Display ! 6-wire Sensor Input ! RS232 Output ! Peak Hold ! Dual Trip Output ! Analogue Output The Type 300 Digital Load Indicator is suitable for use with all full bridge sensors including Load Cells, Torque Transducers and Pressure Transducers. It provides a clear large LED Display of the Load and a smaller LED Display of the engineering units. The indicator provides a supply for the transducer and scales its signal to display in the required units. The indicator has a simple set up menu operated from its keypad with clearly displayed prompts. As an alternative the indicator can be set up through its main RS232 port using a computer and the simple Windows utility. For more advanced users who wish to integrate the indicator with their own computer and control systems a full listing of the commands and protocol are included. The indicator has a dual function RS232 port, the main port allows full communication with the display for both set up and the downloading of data to other systems, the second port provides an output for a serial printer. Other output options include an analogue 0-5V or 0-10Vdc scaled to the display full range and 2 relay outputs. Type 300 Specification Transducer Input 4 or 6 wire connection to any full bridge transducer with a bridge Resistance 120-2000 ohms Strain Input See Adaptor Unit 331 for ¼ and ½ bridge connections Accuracy 1:4000 in 2mV/V~ Display 5 digits plus units (Nm, lb ft, N, T, lb, kg) Display Resolution 1:100000 (0:99999 display) Peak Hold Accuracy 1% f.s.d. Peak Hold Time Resolution <1/100 Sec Trips 2 Independent change-over contacts rated to 1A @ 24V dc Serial Output RS232 Analogue Output 0-10V dc and 4-20mA Operation Temperature Range 0°C to 50°C Storage Temperature Range -20°C to +80°C Environmental IP54 Calibration Zero push button to memory. Full Scale as mV/V from menu Power Supply 12-15V dc mains adaptor supplied Printer Output RS232 Enclosure Desktop/Wall Mounted 225mm x 200mm x 80mm Connections Transducer 7 pin socket 2mtr 6-core cable and plug supplied Trips 6 pin plug 2mtr 6-core cable and socket supplied RS232 9 pin D type socket 2mtr cable supplied with 9 – 25 pin adaptor Printer Requires printer option cable (not standard) Analogue Output 3 pin socket, 2mtr 2-core cable supplied Datum Electronics Limited Park Road, Ryde, Isle of Wight, PO33 2BE Tel: +44 (0)1983 810310 Fax: +44 (0)1983 810318 www.datum-electronics.co.uk e-mail: [email protected]