IDC Systems PCB Solder Transition Connectors 2 ROW PCB SOLDER TRANSITION CONNECTORS LR92984 A ± .25 (± 010) E60980 PHYSICAL PROPERTIES 7.11 (.280) INSULATION MATERIAL: Glass filled thermoplastic rated UL 94V-0 COLOR: Blue CONTACTS: Beryllium copper; tin/lead over 50µ inches nickel ELECTRICAL PROPERTIES 8.76 (.345) Max. assembled 7.06 Max. after cable (.278) installation CURRENT RATING: 1 Amp INSULATION RESISTANCE: >1 x 109 0hms DIELECTRIC STRENGTH: >1000 VRMS at sea level 8.26 (.325) 8.97 Crimp (.353)Position ENVIRONMENTAL PROPERTIES TEMPERATURE RATING: -55˚C TO 125°C APPLICATION TOOLING HAND TOOL use Die BENCH PRESS (MANUAL) BENCH PRESS (PNEUMATIC) use Platen use Base Plate (2 Row) 779-2100 779-2153 779-3200 779-3500XT 779-3133 779-3153 3.88 Nom (.153) B .51 (.020) Pads ± .25 (± 010) Recommended P.C. Board Pattern B ±.13 (± .005) For installation after the connector has been soldered to the circuit board use: PLATEN 779-3132 BASE PLATE 779-3154 8.23Min (.324) ±.25 (± .010) CABLE 2.54 ± .13 (.100 ±.005) See pages 108-120 2.54 ± .13 (.100 ±.005) Tol. Noncumulative .89 ± .05 (.035 ± .002) (After plating) 11.30 (.445) Ordering Information CATALOG NUMBERS SOLDER TAIL LENGTH 2.54 (1.00) 3.96 (.156) PCB THICKNESS 1.57 (.062) 3.18 (.125) 622-0453 622-0463 STRAIN RELIEF NO. OF POS. A B 622-0433 4 10.31 (.406) 2.54 (.100) 622-0653 622-0663 622-0633 6 12.85 (.506) 5.08 (.200) 622-0853 622-0863 622-0833 8 15.39 (.606) 7.62 (.300) 622-1053 622-1063 622-1033 10 17.93 (.706) 10.16 (.400) 622-1453 622-1463 622-1433 14 23.01 (.906) 15.24 (.600) 622-1653 622-1663 622-1633 16 25.55 (1.006) 17.78 (.700) 622-2053 622-2063 622-2033 20 30.63 (1.206) 22.86 (.900) 622-2453 622-2463 622-2433 24 35.71 (1.406) 27.94 (1.100) 622-2653 622-2663 622-2633 26 38.25 (1.506) 30.48 (1.200) 622-3053 622-3063 622-3033 30 43.33 (1.706) 35.56 (1.400) 622-3453 622-3463 622-3433 34 48.41 (1.906) 40.64 (1.600) 622-3653 622-3663 622-3633 36 50.95 (2.006) 43.18 (1.700) 622-4053 622-4063 622-4033 40 56.03 (2.206) 48.26 (1.900) 622-4453 622-4463 622-4433 44 61.11 (2.406) 53.34 (2.100) 622-5053 622-5063 622-5033 50 68.73 (2.706) 60.96 (2.400) 622-6053 622-6063 622-6033 60 81.43 (3.206) 73.66 (2.900) DIMENSIONS IN MM (INCHES) Tail length ±.13 (± .005 (See Cat. No. Code) (End contacts only) 2.54 Nom (.100) 2.29 (.090) Retention Feature Tail length ±.25 (± .010) (See Cat. No. Code) (End contacts only) NOTE: For retention feature add suffix R to part number Thomas & Betts Electronics/OEM Division Tel: 901-252-5000 Fax: 901-252-1312 Dimensions shown are for reference only. Dimensions are in millimeters (inches). 50