ETC 2SC4342L

DATA SHEET
SILICON POWER TRANSISTOR
2SC4342
PNP SILICON EPITAXIAL TRANSISTOR (DARLINGTON CONNECTION)
FOR HIGH-SPEED SWITCHING
ORDERING INFORMATION
The 2SC4342 is a high-speed Darlington power transistor.
This transistor is ideal for high-precision control such as PWM
control for pulse motors or blushless motor of OA and FA equipment.
Part No.
Package
2SC4342
TO-126
FEATURES
• On-chip C-to-E reverse diode
• Fast switching speed
ABSOLUTE MAXIMUM RATINGS (TA = 25°°C)
Ratings
Unit
Collector to base voltage
Parameter
VCBO
150
V
Collector to emitter voltage
VCEO
100
V
Emitter to base voltage
VEBO
Collector current (DC)
IC(DC)
8.0
±3.0
A
Collector current (pulse)
IC(pulse)
PW ≤ 10 ms,
duty cycle ≤ 50%
±5.0
A
0.3
A
TA = 25°C
1.3
W
Base current (DC)
Symbol
Conditions
IB(DC)
Total power dissipation
PT
Junction temperature
Tj
Storage temperature
Tstg
TC = 25°C
V
12
W
150
−55 to +150
°C
°C
INTERNAL EQUIVALENT CIRCUIT
1. Base
2. Collector
3. Emitter
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D14862EJ2V0DS00 (2nd edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
2002
1998
2SC4342
ELECTRICAL CHARACTERISTICS (TA = 25°°C)
Parameter
Symbol
Collector cutoff current
Conditions
MIN.
MAX.
Unit
1.0
µA
5.0
mA
VCB = 100 V, IE = 0 A
Emitter cutoff current
IEBO
VEB = 5.0 V, IC = 0 A
DC current gain
hFE1
VCE = 2.0 V, IC = 1.5 ANote
2,000
DC current gain
hFE2
VCE = 2.0 V, IC = 3.0 ANote
1,000
Collector saturation voltage
VCE(sat)
IC = 1.5 A, IB = 1.5 mANote
1.5
V
Base saturation voltage
VBE(sat)
IC = 1.5 A, IB = 1.5 mANote
IC = 1.5 A, RL = 33 Ω,
IB1 = −IB2 = 3.0 mA, VCC ≅ 50 V
Refer to the switching time (ton, tstg, tf) test
circuit.
2.0
0.3
V
µs
1.5
µs
0.4
µs
Turn-on time
ton
Storage time
tstg
Fall time
tf
Note Pulse test PW ≤ 350 µs, duty cycle ≤ 2%
hFE CLASSIFICATION
Marking
M
L
K
hFE2
2,000 to 5,000
4,000 to 10,000
8,000 to 20,000
SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT
Base current
waveform
Collector current
waveform
2
TYP.
ICBO
Data Sheet D14862EJ2V0DS
20,000
2SC4342
'HUDWLQJG7
7RWDO3RZHU'LVVLSDWLRQ37:
TYPICAL CHARACTERISTICS (TA = 25°°C)
&DVH7HPSHUDWXUH7&°&
&ROOHFWRU&XUUHQW,&$
&DVH7HPSHUDWXUH7&°&
7UDQVLHQW7KHUPDO5HVLVWDQFHUWKMF°&:
&ROOHFWRUWR(PLWWHU9ROWDJH9&(9
3XOVH:LGWK3:PV
Data Sheet D14862EJ2V0DS
3
2SC4342
&ROOHFWRU&XUUHQW,&$
&ROOHFWRU&XUUHQW,&$
3XOVHWHVW
%DVHWR(PLWWHU9ROWDJH9%(9
'&&XUUHQW*DLQK)(
3XOVHWHVW
&ROOHFWRU6DWXUDWLRQ9ROWDJH9&(VDW9
&ROOHFWRUWR(PLWWHU9ROWDJH9&(9
&ROOHFWRU&XUUHQW,&$
3XOVHWHVW
)DOO7LPHWIµV
6WRUDJH7LPHWVWJµV
7XUQ2Q7LPHWRQµV
%DVH6DWXUDWLRQ9ROWDJH9%(VDW9
&ROOHFWRU&XUUHQW,&$
&ROOHFWRU&XUUHQW,&$
4
3XOVHWHVW
&ROOHFWRU&XUUHQW,&$
Data Sheet D14862EJ2V0DS
2SC4342
PACKAGE DRAWING (UNIT: mm)
(PLWWHU
&ROOHFWRU
%DVH
Data Sheet D14862EJ2V0DS
5
2SC4342
• The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
• NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
• While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
• NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4