Preliminary Data Sheet I2124 rev. A 05/98 QUIETIR Series 8EWF..S SURFACE MOUNTABLE FAST SOFT RECOVERY DIODE VF < 1.2V @ 8A trr = 55ns VRRM 200 to 600V Description/Features The 8EWF..S fast soft recovery QUIET IR rectifier series has been optimized for combined short reverse recovery time, low forward voltage drop and low leakage current The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: Output rectification and freewheeling diode in inverters, choppers and converters. Input rectifications where severe restrictions on conducted EMI should be met. Major Ratings and Characteristics Characteristics Package Outline 8EWF..S Units 8 A VRRM 200 to 600 V I FSM 170 A I F(AV) Sinusoidal waveform VF @ 8 A, T J = 25°C 1.2 V trr @ 1A, 100A/µs 55 ns - 40 to 150 °C TJ TO-252AA (D-Pak) 1 8EWF..S QUIET IR Series Preliminary Data Sheet I2124 rev. A 05/98 Voltage Ratings Part Number VRRM, maximum peak reverse voltage VRSM , maximum non repetitive peak reverse voltage IRRM 150°C V V mA 3 8EWF02S 200 300 8EWS04S 400 500 8EWF06S 600 700 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2 t 8EWF..S Units 8 A Max. Peak One Cycle Non-Repetitive 170 Surge Current 200 Max. I2 t for fusing 140 A I √t Max. I √t for fusing 2 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A2 s 200 2 Conditions @ TC = 96° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 2000 A √s 2 t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters 8EWF..S Units VFM Max. Forward Voltage Drop 1.2 V rt 16 mΩ VF(TO) Threshold voltage 1.13 V IRM 0.1 Forward slope resistance Max. Reverse Leakage Current mA 3 Conditions @ 8A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Typical Reverse Recovery Characteristics Parameters 8EWF..S Units Conditions trr Reverse Recovery Time 140 ns I F @ 8Apk Irr Reverse Recovery Current 2.6 A @ 25A/µs Qrr Reverse Recovery Charge 0.25 µC @ T J = 25°C S Snap Factor 0.5 - 2 tb/ta Ifm trr ta dir dt tb t Qrr Irm Irr (REC) 8EWF..S QUIETIR Series Preliminary Data Sheet I2124 rev. A 05/98 Thermal-Mechanical Specifications Parameters 8EWF..S Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C 240 °C 2.5 °C/W 50 °C/W 1(0.03) g (oz.) Soldering Temperature RthJC Max. Thermal Resistance Junction to Case RthJA Typ. Thermal Resistance Junction Conditions for 10 seconds DCoperation to Ambient (PCB Mount)** wt Approximate Weight T Case Style TO-252AA (D-Pak) 8EWF..S Series R thJC (DC) = 2.5 °C/W 140 130 120 Conduction Angle 110 100 90 30° 80 60° 90° 120° 180° 70 60 0 1 2 3 4 5 6 7 8 9 150 8EWF..S Series R thJC (DC) = 2.5 °C/W 140 130 120 110 Conduction Period 100 30° 60° 90 90° 120° 180° 80 DC 70 0 2 4 6 8 10 12 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 12 180° 120° 90° 60° 30° 10 8 RMS Limit 6 4 Conduction Angle 2 8EWF..S Series T J = 150°C 0 0 Maximum Allowable Case Temperature (°C) 150 1 2 3 4 5 6 7 8 9 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 14 16 DC 180° 120° 90° 60° 30° 14 12 10 8 RMS Limit 6 Conduction Period 4 8EWF..S Series T J = 150°C 2 0 0 2 4 6 8 10 12 14 Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 3 8EWF..S QUIET IR Series 200 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 175 150 125 100 75 8EWF..S Series 50 1 10 200 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Preliminary Data Sheet I2124 rev. A 05/98 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 150°C No Voltage Reapplied Rated VRRM Reapplied 180 160 140 120 100 80 8EWF..S Series 60 40 0.01 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 0.1 1 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 100 10 T J= 25°C T J= 150°C 8EWF..S Series 1 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) 0.4 8EWF..S Series T J = 25 °C 0.3 I FM = 20 A 0.2 10 A 8A 5A 0.1 2A 1A 0 0 4 Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) Fig. 7 - Forward Voltage Drop Characteristics 40 80 120 160 200 0.4 8EWF..S Series T J = 150 °C 0.3 I FM = 20 A 0.2 10 A 8A 5A 0.1 2A 1A 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25°C Fig. 9 - Recovery Time Characteristics, TJ = 150°C 8EWF..S QUIETIR Series 1.4 8EWF..S Series T J = 25 °C 1.2 I FM = 20 A 1 10 A 0.8 8A 0.6 5A 0.4 2A 1A 0.2 0 0 40 80 120 160 200 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) Preliminary Data Sheet I2124 rev. A 05/98 2.4 2 1.8 8EWF..S Series T J = 25 °C 14 I FM = 20 A 10 A 12 8A 10 5A 8 2A 6 1A 4 2 0 0 40 80 120 160 200 1.2 Transient Thermal Impedance Z thJC (°C/W) 5A 1 0.8 2A 0.6 0.4 1A 0.2 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 11 - Recovery Charge Characteristics, TJ = 150°C 20 I FM = 20 A 8EWF..S Series T J = 150 °C 18 16 10 A 14 8A 12 5A 10 2A 8 1A 6 4 2 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C 8A 1.4 Maximum Reverse Recovery Current - Irr (A) Maximum Reverse Recovery Current - Irr (A) 16 10 A 1.6 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25°C I FM = 20 A 8EWF..S Series T J = 150 °C 2.2 Fig. 13 - Recovery Current Characteristics, T J = 150°C 10 Steady State Value (DC Operation) 1 D D D D D = = = = = 0.50 0.33 0.25 0.17 0.08 Single Pulse 8EWF..S Series 0.1 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics 5 8EWF..S QUIET IR Series Preliminary Data Sheet I2124 rev. A 05/98 Ordering Information Table Device Code 8 E W F 06 S TRL 1 2 3 4 5 6 7 1 - Current Rating 2 - Circuit Configuration: 1 - Package: 4 - Type of Silicon: 3 Anode Anode E = Single Diode 3 BASE Cathode 2 Anode Anode W = D-Pak F = Fast Soft Recovery Rectifier 02 = 200V 5 - Voltage code: Code x 100 = VRRM 04 = 400V 6 - S = Surface Mountable 06 = 600V 7 - Tape and Reel Option: TRL = Left Orientation Reel TRR = Right Orientation Reel Outline Table 2.38 (0.09) 2.19 (0.08) 6.73 (0.26) 6.35 (0.25) 1.14 (0.04) 0.89 (0.03) 5.46 (0.21) 5.21 (0.20) 1.27 (0.05) 0.88 (0.03) 0.58 (0.02) 0.46 (0.02) 4 6.45 (0.24) 5.68 (0.22) 6.22 (0.24) 5.97 (0.23) 1.64 (0.02) 1 2 10.42 (0.41) 9.40 (0.37) 3 0.51 (0.02) M IN. 1.52 (0.06) 1.15 (0.04) 2x 1.14 (0.04) 0.76 (0.03) 3x 0.89 (0.03) 0.64 (0.02) 2.28 (0.09) 2x 4.57 (0.18) 0.58 (0.02) 0.46 (0.02) 1 2 3 4 - anode - cathode - anode - cathode Dimensions in millimeters and inches 6 8EWF..S QUIETIR Series Preliminary Data Sheet I2124 rev. A 05/98 Marking Information EXAMPLE: THIS IS AN 8EWF06S (K) INTERNATIONAL PART NUMBER RECTIFIER LOGO 8EWF06S 9712 5K3A ASSEMBLY DATE CODE (YYWW) LOT CODE (A) (A) YY = YEAR WW = WEEK Tape & Reel Information TR 4.1 (0.16) 3.9 (0.15) 1.85 (0.07) DIA. 1.65 (0.06) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) 1.65 (0.06) 0.35 (0.01) 0.25 (0.01) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 13 (0.52) DIA. 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 7.0 (0.28) 6.8 (0.26) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 22.4 (0.88) TO-252AA Tape & Reel 375 (14.17) DIA. MAX. 50 (1.97) DIA. When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 7