54LS05/DM54LS05/DM74LS05 Hex Inverters with Open-Collector Outputs General Description Pull-Up Resistor Equations This device contains six independent gates each of which performs the logic INVERT function. The open-collector outputs require external pull-up resistors for proper logical operation. Features Y Alternate Military/Aerospace device (54LS05) is available. Contact a National Semiconductor Sales Office/ Distributor for specifications. RMAX e VCC (Min) b VOH N1 (IOH) a N2 (IIH) VCC (Max) b VOL RMIN e IOL b N3 (IIL) Where: N1 (IOH) e total maximum output high current for all outputs tied to pull-up resistor N2 (IIH) e total maximum input high current for all inputs tied to pull-up resistor N3 (IIL) e total maximum input low current for all inputs tied to pull-up resistor Connection Diagram Dual-In-Line Package TL/F/6346 – 1 Order Number 54LS05DMQB, 54LS05FMQB, DM54LS05J, DM54LS05W, DM74LS05M or DM74LS05N See NS Package Number E20A, J14A, M14A, N14A or W14B Function Table YeA Input Output A Y L H H L H e High Logic Level L e Low Logic Level C1995 National Semiconductor Corporation TL/F/6346 RRD-B30M105/Printed in U. S. A. 54LS05/DM54LS05/DM74LS05 Hex Inverters with Open-Collector Outputs June 1989 Absolute Maximum Ratings (Note) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. Supply Voltage 7V Input Voltage 7V Output Voltage 7V Operating Free Air Temperature Range b 55§ C to a 125§ C DM54LS and 54LS DM74LS 0§ C to a 70§ C Storage Temperature Range b 65§ C to a 150§ C Recommended Operating Conditions Symbol DM54LS05 Parameter DM74LS05 Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 V V VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage 0.7 0.8 VOH High Level Output Voltage 5.5 5.5 V IOL Low Level Output Current 4 8 mA TA Free Air Operating Temperature 70 §C 2 2 b 55 125 V 0 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol VI Parameter Conditions Typ (Note 1) Min Max Units b 1.5 V 100 mA Input Clamp Voltage VCC e Min, II e b18 mA ICEX High Level Output Current VCC e Min, VO e 5.5V VIL e Max VOL Low Level Output Voltage VCC e Min, IOL e Max VIH e Min DM54 0.25 0.4 DM74 0.35 0.5 IOL e 4 mA, VCC e Min DM74 0.25 0.4 II Input Current @ Max Input Voltage VCC e Max, VI e 7V IIH High Level Input Current IIL ICCH ICCL V 0.1 mA VCC e Max, VI e 2.7V 20 mA Low Level Input Current VCC e Max, VI e 0.4V b 0.36 mA Supply Current with Outputs High VCC e Max 1.2 2.4 mA Supply Current with Outputs Low VCC e Max 3.6 6.6 mA Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load) RL e 2 kX Symbol Parameter CL e 15 pF CL e 50 pF Units Min Max Min Max tPLH Propagation Delay Time Low to High Level Output 6 20 20 45 ns tPHL Propagation Delay Time High to Low Level Output 3 15 4 20 ns Note 1: All typicals are at VCC e 5V, TA e 25§ C. 2 Physical Dimensions inches (millimeters) 14-Lead Ceramic Dual-In-Line Package (J) Order Number 54LS05DMQB or DM54LS05J NS Package Number J14A 14-Lead Small Outline Molded Package (M) Order Number DM74LS05M NS Package Number M14A 3 54LS05/DM54LS05/DM74LS05 Hex Inverters with Open-Collector Outputs Physical Dimensions inches (millimeters) (Continued) 14-Lead Molded Dual-In-Line Package (N) Order Number DM74LS05N NS Package Number N14A 14-Lead Ceramic Flat Package (W) Order Number 54LS05FMQB or DM54LS05W NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.