Specification For Release Part Number: 744203 Description : COMMON MODE SMD LINE FILTER DATE : 2010-07-26 A Mechanicals Dimensions: NO. A B C D E F G C Soldering Spec.: : Test Conditions Inductance(OCL) 100 kHz / 0,1 V L (4x) 500,0 µH ±35% Differential Inductance 100 kHz / 0,1 V |L1-L2| 35,0 µH typ. DC-resistance(DCR) @ 20 °C RDC 300 mΩ max. ∆T = 40 K IDC 400 mA max. Z 3000 Ω max. UDC 80 V Rated Rurrent Impedance Rated Voltage Unit Tol. [mm] 2.2 2.2 10.3 1.0 Properties Value Units mm mm mm mm mm mm mm 2.5 B Electrical Specifications Dimensions 12,70 ± 0,8 11,00 ± 0,5 5,75 ± 0,3 9,50 ± 0,2 2,50 ± 0,2 0,70 ± 0,1 10,50 max. 14.7 D Test Equipment: E Test Conditions: HP 4282 A For L und/and Q Humidity: 33% Temperature: +20°C High-Pot Test:(60Hz 3mA 1min.) 500 VAC HP 34401 A For I DC und/and R DC F Material & Approvals: G Granted Properties: -40°C - +125°C Base Material: Ferrite Operating Temperature: Wire: Class F Ambient Temperature: -40°C - +85°C Housing: UL94 V-0 General Release: .................................................................................. Date .................................................................................. Checked Customer .................................................................................. Signature ANWEN TECH CO., LTD. .................................................................................. Approved Name Tel (+86) (760) 88991508 · Fax (+86)(760)-23304508 http://www.anwen.com.cn Date Specification for release 744203 Part Number : COMMON MODE SMD LINE FILTER Description : H Impedance Curve: 10.000 Impedanz / impedance Z [Ohm] Impedance Z [Ohm] 1.000 100 10 1 0,1 1 10 100 1000 Frequency f [MHz] Z(comm) Common Mode General Release: .................................................................................. Date .................................................................................. Checked Z(diff) Differential Mode Customer .................................................................................. Signature ANWEN TECH CO., LTD. .................................................................................. Approved Name Date This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage. Tel (+86) (760) 88991508 ·FaxXX (86)(760)23304508 http://www.anwen.com.cn SEITE 2 VON 2