B-XES&F-XES&H-XES Series Isolated 3W Single Output DC/DC Converters MODELS Single output Models Ouput Voltage Ouput Current max. H0503XES-3W 3.3VDC 800mA H0505XES-3W 5VDC 600mA F0507XES-3W H0507XES-3W 7.2VDC 417mA B0509XES-3W F0509XES-3W H0509XES-3W 9VDC 333mA B0512XES-3W F0512XES-3W H0512XES-3W 12VDC 250mA B0515XES-3W F0515XES-3W H0515XES-3W 15VDC 200mA B0518XES-3W F0518XES-3W H0518XES-3W 18VDC 167mA B0524XES-3W F0524XES-3W H0524XES-3W 24VDC 125mA B1203XES-3W F1203XES-3W H1203XES-3W 3.3VDC 800mA B1205XES-3W F1205XES-3W H1205XES-3W 5VDC 600mA B1207XES-3W F1207XES-3W H1207XES-3W 7.2VDC 417mA B1209XES-3W F1209XES-3W H1209XES-3W 9VDC 333mA B1212XES-3W F1212XES-3W H1212XES-3W 12VDC 250mA B1215XES-3W F1215XES-3W H1215XES-3W 15VDC 200mA B1218XES-3W F1218XES-3W H1218XES-3W 18VDC 167mA B1224XES-3W F1224XES-3W H1224XES-3W 24VDC 125mA MODEL SELECTION B2403XES-3W F2403XES-3W H2403XES-3W 3.3VDC 800mA ① ② ③ ④ ⑤ ⑥ B 24 05 X ES -3W B2405XES-3W F2405XES-3W H2405XES-3W 5VD 600mA B2407XES-3W F2407XES-3W H2407XES-3W 7.2VD 417mA B2409XES-3W F2409XES-3W H2409XES-3W 9VDC 333mA B2412XES-3W F2412XES-3W H2412XES-3W 12VDC 250mA B2415XES-3W F2415XES-3W H2415XES-3W 15VDC 200mA B2418XES-3W F2418XES-3W H2418XES-3W 18VDC 167mA B2424XES-3W F2424XES-3W H2424XES-3W 24VDC 125mA FEATURES REGULATED SINGLE OUTPUT ◆ 12 PIN SIP PACKAGE ◆ LOW RIPPLE & NOISE ◆ HIGH EFFICIENCY UP TO 70% ◆ INPUT/OUTPUT ISOLATION: 1000, ◆ 3000 & 6000VDC OPERATING TEMPERATURE: -25°C~ +71°C ◆ PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS ◆ ①Product Series ③Output Voltage ⑤EXTEND SIP ②Input Voltage ④Fixed Input ⑥Rated Power APPLICATIONS Our series is a family of cost effective 3W single output DC-DC converters.These converters combine miniature package in a 12-pin SIP compatible case with high performance features such as 1000, 3000 & 6000VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation. Seventy two models operate from input voltages of 5, 12 & 24VDC with producing output voltage levels of 3.3, 5, 7.2, 9, 12, 15, 18, 24VDC. High performance features include high efficiency operation up to 70% and output voltage accuracy of ±2 maximum. Standard features include an input range of ±10% tolerance and low output noise and ripple. All models are package in a low profile 31.80x8.60x13.47mm 12 pin SIP non-conductive black plastic case. Operation is specified over the full operating temperature range of -25℃ to +71℃ with no derating required. Cooling is by free-air convection. MICRODC RESERVES THE COPYRIGHT http://www.microdc.cn Isolation 1000VDC Isolation 3000VDC Isolation 6000VDC B0503XES-3W F0503XES-3W B0505XES-3W F0505XES-3W B0507XES-3W Input Voltage 5V±10% 12V±10 % 24V±10 % ELECTRICAL SPECIFICATIONS Specifications typical at +25 ° C, nominal input voltage, rated output current unless otherwise specifie Input Specifications: Voltage range ±10% Filter p (Pi) Network Isolation Specifications: Rated voltage (60 sec) 1000, 3000, 6000VDC Resistance > 1000MOhm Capacitance 60pF, typ. Output Specifications: Voltage accuracy ±2%, max Ripple & noise (at 20MHz BW) 75mVp-p, max. Short circuit protection Continuous Short circuit restart Automatic Line voltage regulation ±0.5%, max. Load voltage regulation ±0.5%, max Temperature coefficient ±0.02%/℃, typ Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 B-XES&F-XES&H-XES Series ELECTRICAL SPECIFICATIONS Specifications typical at +25 +25° °C, nominal input voltage, rated output current unless otherwise specifie General Specifications: Efficiency 64% to 70% Switching frequency 125KHz, typ. 100%load Environmental Specifications: Operating temperature (ambient) -25°C~ +71°C Storage temperature -40°C~ +125 Case temperature +90°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions 31.80x8.60x13.47mm 1.25x0.34x0.53inches Weight 10.7g Case material Non-conductive black plastic OUTLINE DIMENSIONS & PIN CONNECTIONS Pin 1000, 3000 & 6000VDC Single 1 +V Input 2 N.C. 3 N.C. 9 N.C. 10 -V output 11 +V output 12 -V input RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 B-XES&F-XES&H-XES Series http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3