MICRODC B2424S-1W

ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER
BxxxxS-1W SERIES
DESCRIPTION
The BxxxxS-1W series of DC/DC Converters is particularly suited to isolating and/or converting DC power rails.
The galvanic isolation allows the device to be configured to provide an isolated negative rail in systems where
only positive rails exist. The wide temperatu re range guarantees startup from –40°C and full 1 watt output at
85°C. For lower ripple, refer to output ripple reduction section.
FEATURES
�
RoHS compliant
�
5V, 12V, 24V & 48V input
�
Single isolated output
�
5V, 9V, 12V and 15V output
�
1kVDC isolation
�
No heatsink required
�
Efficiency up to 80%
�
Internal SMD construction
�
Wide temperature performance at full 1 watt load, –40°C to
�
Fully encapsulated with toroidal magnetics
85°C
�
No external components required
�
Power density 1.53W/cm3
�
MTTF up to 2.4 million hours
�
UL 94V-0 package material
�
Custom solutions available
�
PCB mounting
2
�
Footprint from 0.69cm
�
Industry standard pinout
SELECTION GUIDE
Input
Output
Output
Input Current
Voltage
Voltage
Current
(Rated Load)
(V)
(V)
(mA)
(mA)
%
pF
kHrs
B0505S-1W
5
5
200
289
70
48
290
B0509S-1W
5
9
111
260
77
37
1173
B0512S-1W
5
12
83
256
78
33
633
B0515S-1W
5
15
66
250
80
40
360
B0524S-1W
5
24
42
248
80
48
290
B1205S-1W
12
5
200
120
69
33
620
B1209S-1W
12
9
111
115
74
48
488
B1212S-1W
12
12
83
110
76
55
360
B1215S-1W
12
15
66
115
72
48
488
B2405S-1W
24
5
200
60
70
40
201
B2409S-1W
24
9
111
56
75
59
185
B2412S-1W
24
12
83
52
80
78
163
B2415S-1W
24
15
66
52
80
79
136
B4805S-1W
48
5
200
30
70
32
213
B4809S-1W
48
9
111
28
75
50
194
B4812S-1W
48
12
83
26
80
76
164
B4815S-1W
48
15
66
26
80
75
140
Order Code
WWW.TYCEM.COM
Efficiency
Isolation
Capacitance
Copyright Guangzhou Tycem Electronics Limited
MTTF1
Package
Style
SIP
Page 1 of 4
ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER
BxxxxS-1W SERIES
When operated with additional external load capacitance the rise time of the input voltage will determine the maximum external capacitance
value for guaranteed start up. The slower the rise time of the input voltage the greater the maximum value of the additional external
capacitance for reliable start up.
INPUT CHARACTERISTICS
Parameter
Voltage range
Conditions
Min.
Typ.
Max.
Continuous operation, 5V input types
4.5
5
5.5
Continuous operation, 12V input types
10.8
12
13.2
Continuous operation, 24V input types
21.6
24
26.4
Continuous operation, 48V input types
43.2
48
52.8
Units
V
OUTPUT CHARACTERISTICS
Parameter
Rated
Power
2
Conditions
5V & 12V input types
TA=-40°C to 85°C
24V & 12V input types
TA=-40°C to 85°C
Voltage Set Point Accuracy
See tolerance envelope
Line regulation
High VIN to low VIN
Min.
Typ.
1
Max.
Units
1
W
1.2
%/%
10% load to rated load, 5V output types
15
10% load to rated load, other output types
10
Load Regulation
Ripple and
%
5V & 12V Input
Noise
24V & 48V Input
BW=DC to 20MHz, 5V output types
85
110
BW=DC to 20MHz, 9V output types
60
75
BW=DC to 20MHz, 12V output types
50
65
BW=DC to 20MHz, 15V output types
40
55
BW=DC to 20MHz, All output types
mV p-p
150
ABSOLUTE MAXIMUM RATINGS
Short-circuit protection
3
1 second
Lead temperature 1.5mm from case for 10 seconds
300℃
Internal power dissipation
450mW
Input voltage VIN, A05 types
7V
Input voltage VIN, A12 types
15V
Input voltage VIN, A24 types
28V
Input voltage VIN, A48 types
54V
ISOLATION CHARACTERISTICS
Parameter
Conditions
Min.
Isolation test voltage
Flash tested for 1 second
1000
Resistance
Viso= 1000VDC
Type
Max.
Units
VDC
10
GΩ
TEMPERATURE CHARACTERISTICS
Parameter
Specification
WWW.TYCEM.COM
Conditions
5V & 12V input types
Min.
Type
-40
Copyright Guangzhou Tycem Electronics Limited
Max.
Units
85
°C
Page 2 of 4
ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER
BxxxxS-1W SERIES
24V & 48V input types
Storage
All
Case Temperature above ambient
Cooling
0
70
-50
150
5V output types
41
All other output types
32
Free air convection
GENERAL CHARACTERISTICS
Parameter
Conditions
Switching frequency
All input types
1.
Calculated using MIL-HDBK-217F with nominal input voltage at full load.
2.
See derating graph
3.
Supply voltage must be discontinued at the end of the short circuit duration.
Min.
Type
100
Max.
Units
kHz
O u tp u t P o w e r (W )
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.
5V & 12V Input
24V & 48V Input
1.5
70° c 85° c
1
0.5
0
-40° c
0° c
50° c
100° c
150° c
A m b ie n t T e m p e ra tu re ( C )
WWW.TYCEM.COM
PACKAGE SPECIFICATIONS
Copyright Guangzhou Tycem Electronics Limited
Page 3 of 4
ISOLATED UNREGULATED DUAL OUTPUT DC/DC CONVERTER
BxxxxS-1W SERIES
Guangzhou Tycem Electronics Limited
Web:www.tycem.com
220
7/81696730
Tel:+ 86 20 8163
8163220
2207/81696730
com
Email:support@Tycem.
Email:[email protected]
Fax:+ 86 20 81576282
All dimensions in inches ±0.01.
All pins on a 0.1 pitch and within 0.01 of
true position.
All dimensions in inches ±0.01.
All pins on a 0.1 pitch and within 0.01 of
true position.
WWW.TYCEM.COM
Copyright Guangzhou Tycem Electronics Limited
Page 4 of 4