WRA-YS-3W＆WRB-YS -3W Series 3W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC DC--DC CONVERTER SELECTION GUIDE Input Output Efficiency Order code Voltage(VDC) Voltage Current(mA) (%.Typ.) FEATURES Wide (2:1) Input Range ◆ Short Circuit Protection(automatic recovery) ◆ 1500VDC Isolation ◆ Operating Temperature: -40℃～﹢70℃ ◆ Small Footprint Nominal Range (VDC) Max. WRB0503YS-3W 5 4.5-9 3.3 700 76 WRB0505YS-3W 5 4.5-9 5 600 81 WRB0512YS-3W 5 4.5-9 12 250 83 WRB0515YS-3W 5 4.5-9 15 200 76 WRA0505YS-3W 5 4.5-9 ±5 ±300 81 WRA0512YS-3W 5 4.5-9 ±12 ±125 81 WRA0515YS-3W 5 4.5-9 ±15 ±100 76 WRB1203YS-3W 12 9-18 3.3 700 81 WRB1205YS-3W 12 9-18 5 600 83 WRB1212YS-3W 12 9-18 12 250 74 WRB1215YS-3W 12 9-18 15 200 76 WRA1205YS-3W 12 9-18 ±5 ±300 81 WRA1212YS-3W 12 9-18 ±12 ±125 81 WRA1215YS-3W 12 9-18 ±15 ±100 76 WRB2403YS-3W 24 18-36 3.3 700 81 WRB2405YS-3W 24 18-36 5 600 83 WRB2412YS-3W 24 18-36 12 250 74 WRB2415YS-3W 24 18-36 15 200 76 WRA2405YS-3W 24 18-36 ±5 ±300 81 WRA2412YS-3W 24 18-36 ±12 ±125 81 WRA2415YS-3W 24 18-36 ±15 ±100 85 WRB4803YS-3W 48 36-75 3.3 700 83 WRB4805YS-3W 48 36-75 5 600 85 WRB4812YS-3W 48 36-75 12 250 74 WRB4815YS-3W 48 36-75 15 200 78 WRA4805YS-3W 48 36-75 ±5 ±300 80 WRA4812YS-3W 48 36-75 ±12 ±125 80 WRA4815YS-3W 48 36-75 ±15 ±100 85 ◆ Ultra-compact SIP-8 packaged ◆ Internal SMD construction ◆ Remote On/Off control ◆ Excellent load and line regulation ◆ MODEL SELECTION WRB①24②12③Y④ S⑤-3W⑥ ①Product Series ②Input Voltage ③Output Voltage ④Wide (2:1) Input Range ⑤SIP Package Style ⑥ Rated Power APPLICATIONS The WRA_YS-3W&WRB_YS-3W Series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range (Voltage range≤2:1); 2) Where isolation is necessary between input and output (Isolation voltage≤1500VDC); 3) Where the regulation of the Output voltage and the output ripple noise are demanded. NOTE: Case material:non-conductive plastic Weight: 4.8g (0.17oz) Input Specifications Parameter Input current at full load (nominal input voltage) Max. 4.5–9 Vin models: 820 mA max. 9-–18 Vin models: 330 mA max. 18–36 Vin models: 170 mA max. 36–75 Vin models: 85 mA max. Surge voltage 4.5–9 Vin models: 15 V max. (100 msec. max.) 9-–18 Vin models: 36 V max. Input voltage variation MICRODC RESERVES THE COPYRIGHT Conditions 18–36 Vin models: 50 V max. 36–75 Vin models: 100 V max. 5 V/ms, max. (dv/dt) (complies with ETS300 132 part 4.4) Input filter capacitor type (see application note for compliance to EN 55022 class A/B) Start up time http://www.microdc.cn < 1ms at nominal input and resistive load Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 WRA-YS-3W＆WRB-YS -3W Series Output Specifications Parameter Conditions Voltage set accuracy Regulation ± 1 % max – Input variation Vin min. to Vin max. – Load variation 5 – 100% 0.2 % max. single output models: 0.5 % max. dual output models: – Load variation 0 – 100% single output models: 1.0 % max. dual output models: – Load cross regulation 25/100% 0% of rated max. load Temperature coefficient 0.1 %/K 75 mVpk-pk max. Ripple and noise (20 MHz Bandwidth) (constant resistive load) 1.0 % max. balanced load 5.0 % max. (dual output models) Minimum load Start up time 1.0 % max. balanced load – Power On 30 ms typ. – Remote On 30 ms typ. Transient response setting time 500 µs typ (25% load step change) Temperature coefficient ± 0.1 %/°C Short circuit protection continuous, automatic recovery Capacitive load 3.3 VDC / 5 VDC output models: 1‘760 µF max. / 1’000 µF max. 12 VDC / 15 VDC output models: 170 µF max. / 110 µF max. ±5 VDC / ±15 VDC output models: ±15 VDC output models: ± 470 µF max. / ± 100 µF max. ± 47 µF max. Case materialSpecifications General Parameter Temperature ranges Conditions – Operating – 40 °C ... + 70 °C (no derating) – Case temperature +100 °C max. – Storage – 55 °C ... + 125 °C Load derating 3.5 %/K above 70°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF >2.4 Mio h @ 25°C (MIL-HDBK-217F ground benign) Isolation voltage (60 sec) – Input/Output 1’500 VDC Isolation capacity – Input/Output 1000 pF max. – Input/Output (500 VDC) >10 GOhm Isolation resistance Switching frequency Remote On/Off 100 kHz (PWM) – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor – Off stand by input current 2.5 mA max. All specifcations valid at nominal input voltage, full load and +25 +25°°C after warm-up time unless otherwise stated. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 WRA-YS-3W＆WRB-YS -3W Series OUTLINE DIMENSIONS ＆ FOOTPRINT DETAILS MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT RECOMMENDED FOOTPRINT Top view grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) Note: Unit:mm[inch] Pin section tolerances:±0.10mm[±0.004inch] General tolerances:±0.25mm[±0.010inch] TUBE OUTLINE DIMENSIONS FOOTPRINT DETAILS Pin Single Dual 1 -Vin(GND) -Vin(GND) 2 +Vin(Vcc) +Vin(Vcc) 3* Remote On/Off Remote On/Off 5 No function No function 6 +Vout +Vout 7 0V Common 8 No function -Vout Note:specifications can be changed any time without notice. *:this pin can be added according to customer’s need. When the environment temperature is higher than 71℃, the product output power should be less then 60% of the rated power. No parallel connection or plug and play. Note: Unit :mm[inch] General tolerances:±0.50mm[±0.020inch] L=530mm[20.866inch] Tube Quantity: 22pcs L=220mm[8.661inch] Tube Quantity:8pcs Note: 1. The load shouldn't be less than 10%, otherwise ripple will increase dramatically. 2. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. 3. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 4. In this data sheet, all the test methods of indications are based on corporate standards. 5. Only typical models listed, other models may be different, please contact our technical person for more details. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3