AD ADXRS646BBGZ-RL

High Stability, Low Noise
Vibration Rejecting Yaw Rate Gyroscope
ADXRS646
Data Sheet
FEATURES
GENERAL DESCRIPTION
12°/hr bias stability
Z-axis (yaw rate) response
0.01°/√sec angle random walk
High vibration rejection over wide frequency
Measurement range extendable to a maximum of ±450°/sec
10,000 g powered shock survivability
Ratiometric to referenced supply
6 V single-supply operation
−40°C to +105°C operation
Self-test on digital command
Ultrasmall and light (<0.15 cc, <0.5 gram)
Temperature sensor output
Complete rate gyroscope on a single chip
RoHS compliant
The ADXRS646 is a high performance angular rate sensor
(gyroscope) that offers excellent vibration immunity. Bias
stability is a widely-recognized figure of merit for high
performance gyroscopes, but in real-world applications,
vibration sensitivity is often a more significant performance
limitation and should be considered in gyroscope selection. The
ADXRS646 offers superior vibration immunity and acceleration
rejection as well as a low bias drift of 12°/hr (typical), enabling it
to offer rate sensing in harsh environments where shock and
vibration are present.
The ADXRS646 is manufactured using the Analog Devices,
Inc., patented high volume BiMOS surface-micromachining
process. An advanced, differential, quad sensor design provides
the improved acceleration and vibration rejection. The output
signal, RATEOUT, is a voltage proportional to angular rate
about the axis normal to the top surface of the package. The
measurement range is a minimum of ±250°/sec. The output is
ratiometric with respect to a provided reference supply. Other
external capacitors are required for operation.
APPLICATIONS
Industrial applications
Severe mechanical environments
Platform stabilization
A temperature output is provided for compensation techniques.
Two digital self-test inputs electromechanically excite the sensor
to test proper operation of both the sensor and the signal conditioning circuits.
The ADXRS646 is available in a 7 mm × 7 mm × 3 mm CBGA
chip-scale package.
FUNCTIONAL BLOCK DIAGRAM
3V TO 6V
(ADC REF)
100nF
6V
ST2
ST1
TEMP
AVCC
100nF
SELF-TEST
25kΩ
@ 25°C
VRATIO
ADXRS646
25kΩ
AGND
DEMOD
MECHANICAL
SENSOR
DRIVE
AMP
6V
AC
AMP
VGA
ROUT
VDD
180kΩ ±1%
CHARGE PUMP
AND VOLTAGE
REGULATOR
100nF
PGND
SUMJ
RATEOUT
100nF
22nF
22nF
COUT
09771-001
CP1 CP2 CP3 CP4 CP5
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2011 Analog Devices, Inc. All rights reserved.
ADXRS646
Data Sheet
TABLE OF CONTENTS
Features .............................................................................................. 1
Theory of Operation .........................................................................9
Applications ....................................................................................... 1
Setting Bandwidth .........................................................................9
General Description ......................................................................... 1
Temperature Output and Calibration .........................................9
Functional Block Diagram .............................................................. 1
Supply Ratiometricity ................................................................ 10
Revision History ............................................................................... 2
Null Adjustment ......................................................................... 10
Specifications..................................................................................... 3
Self-Test Function ...................................................................... 10
Absolute Maximum Ratings............................................................ 4
Continuous Self-Test .................................................................. 10
Rate Sensitive Axis ....................................................................... 4
Modifying the Measurement Range ........................................ 10
ESD Caution .................................................................................. 4
Immunity to Vibration .............................................................. 11
Pin Configuration and Function Descriptions ............................. 5
Outline Dimensions ....................................................................... 12
Typical Performance Characteristics ............................................. 6
Ordering Guide .......................................................................... 12
REVISION HISTORY
9/11—Revision 0: Initial Version
Rev. 0 | Page 2 of 12
Data Sheet
ADXRS646
SPECIFICATIONS
All minimum and maximum specifications are guaranteed. Typical specifications are not guaranteed.
TA = 25°C, VS = AVCC = VDD = 6 V, VRATIO = AVCC, angular rate = 0°/sec, bandwidth = 80 Hz (COUT = 0.01 µF), IOUT = 100 µA, ±1 g, unless
otherwise noted.
Table 1.
Parameter
SENSITIVITY 1
Measurement Range 2
Initial
Temperature Drift 3
Nonlinearity
NULL1
Null
Calibrated Null 4
Temperature Drift3
Linear Acceleration Effect
Vibration Rectification
NOISE PERFORMANCE
Rate Noise Density
Rate Noise Density
Resolution Floor
FREQUENCY RESPONSE
Bandwidth 5
Sensor Resonant Frequency
SELF-TEST1
ST1 RATEOUT Response
ST2 RATEOUT Response
ST1 to ST2 Mismatch 6
Logic 1 Input Voltage
Logic 0 Input Voltage
Input Impedance
TEMPERATURE SENSOR1
VOUT at 25°C
Scale Factor4
Load to VS
Load to Common
TURN-ON TIME4
OUTPUT DRIVE CAPABILITY
Current Drive
Capacitive Load Drive
POWER SUPPLY
Operating Voltage (VS)
Quiescent Supply Current
TEMPERATURE RANGE
Specified Performance
Test Conditions/Comments
Clockwise rotation is positive output
Full-scale range over specifications range
Min
Typ
±250
8.5
±300
9
±3
0.01
2.7
Any axis
25 g rms, 50 Hz to 5 kHz
3.0
±0.1
±3
0.015
0.0001
TA ≤ 25°C
TA ≤ 105°C
TA = 25°C, 1 minute to 1 hour in-run
0.01
0.015
12
Best fit straight line
−40°C to +105°C
−40°C to +105°C
±3 dB user adjustable up to specification
15.5
ST1 pin from Logic 0 to Logic 1
ST2 pin from Logic 0 to Logic 1
1000
17.5
Max
9.5
3.3
20
+5
2
100
−5
4
ST1 pin or ST2 pin to common
40
50
Load = 10 MΩ
25°C, VRATIO = 6 V
2.8
2.9
10
25
25
°/sec
mV/°/sec
%
% of FS
V
°/sec
°/sec
°/sec/g
°/sec/g2
°/sec/√Hz
°/sec/√Hz
°/hr
−50
50
±0.5
ST1 pin or ST2 pin
Unit
°/sec
°/sec
%
V
V
kΩ
Power on to ±0.5°/sec of final with CP5 = 100 nF
50
V
mV/°C
kΩ
kΩ
ms
For rated specifications
200
1000
µA
pF
6.25
V
mA
+105
°C
5.75
−40
6.00
4
3.0
Hz
kHz
Parameter is linearly ratiometric with VRATIO.
Measurement range is the maximum range possible, including output swing range, initial offset, sensitivity, offset drift, and sensitivity drift at 5 V supplies.
From +25°C to −40°C or +25°C to +105°C.
4
Based on characterization.
5
Adjusted by external capacitor, COUT. Reducing bandwidth below 0.01 Hz does not result in further noise improvement.
6
Self-test mismatch is described as (ST2 + ST1)/((ST2 − ST1)/2).
1
2
3
Rev. 0 | Page 3 of 12
ADXRS646
Data Sheet
ABSOLUTE MAXIMUM RATINGS
RATE SENSITIVE AXIS
Parameter
Acceleration (Any Axis, 0.5 ms)
Unpowered
Powered
VDD, AVCC
VRATIO
ST1, ST2
Output Short-Circuit Duration
(Any Pin to Common)
Operating Temperature Range
Storage Temperature Range
Rating
10,000 g
10,000 g
−0.3 V to +6.6 V
AVCC
AVCC
Indefinite
−55°C to +125°C
−65°C to +150°C
This is a Z-axis rate-sensing device (also called a yaw ratesensing device). It produces a positive going output voltage
for clockwise rotation about the axis normal to the package
top, that is, clockwise when looking down at the package lid.
RATE
AXIS
RATE OUT
AVCC = 5V
LONGITUDINAL
AXIS
4.75V
+
VRATIO/2
7
RATE IN
1
Stresses above those listed under the Absolute Maximum
Ratings may cause permanent damage to the device. This is a
stress rating only; functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
A1
0.25V
ABCDE FG
LATERAL AXIS
GND
Figure 2. RATEOUT Signal Increases with Clockwise Rotation
ESD CAUTION
Drops onto hard surfaces can cause shocks of greater than
10,000 g and can exceed the absolute maximum rating of the
device. Care should be exercised in handling to avoid damage.
Rev. 0 | Page 4 of 12
09771-002
Table 2.
Data Sheet
ADXRS646
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
BOTTOM VIEW
VDD
PGND
CP5
CP3
CP4
7
6
ST1
CP1
5
ST2
CP2
4
AVCC
3
TEMP
2
1
G
F
VRATIO
DNC
SUMJ
E
D
C
RATEOUT
B
NOTES
1. DNC = DO NOT CONNECT TO THIS PIN.
A
09771-003
AGND
Figure 3. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
6D, 7D
6A, 7B
6C, 7C
5A, 5B
4A, 4B
3A, 3B
1B, 2A
1C, 2C
1D, 2D
1E, 2E
1F, 2G
3F, 3G
4F, 4G
5F, 5G
6G, 7F
6E, 7E
Mnemonic
CP5
CP4
CP3
CP1
CP2
AVCC
RATEOUT
SUMJ
DNC
VRATIO
AGND
TEMP
ST2
ST1
PGND
VDD
Description
HV Filter Capacitor, 100nF (±5%).
Charge Pump Capacitor, 22 nF (±5%).
Charge Pump Capacitor, 22 nF (±5%).
Charge Pump Capacitor, 22 nF (±5%).
Charge Pump Capacitor, 22 nF (±5%).
Positive Analog Supply.
Rate Signal Output.
Output Amp Summing Junction.
Do Not Connect to this Pin.
Reference Supply for Ratiometric Output.
Analog Supply Return.
Temperature Voltage Output.
Self-Test for Sensor 2.
Self-Test for Sensor 1.
Charge Pump Supply Return.
Positive Charge Pump Supply.
Rev. 0 | Page 5 of 12
ADXRS646
Data Sheet
TYPICAL PERFORMANCE CHARACTERISTICS
N > 1000 for all typical performance plots, unless otherwise noted.
35
30
25
PERCENT OF POPULATION (%)
20
15
10
5
20
15
10
3.25
RATEOUT (V)
0
8.5
09771-004
3.20
3.15
3.10
3.05
3.00
2.95
2.90
2.85
2.80
5
2.75
0
25
8.6
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
SENSITIVITY (mV/°/sec)
Figure 4. Null Bias at 25°C
09771-010
PERCENT OF POPULATION (%)
30
Figure 7. Sensitivity at 25°C
40
30
PERCENT OF POPULATION (%)
PERCENT OF POPULATION (%)
35
25
20
15
10
30
25
20
15
10
5
–10 –8 –6 –4 –2
4
6
8
10 12 14 16 18 20
Figure 8. Sensitivity Drift over Temperature
3.5
1k
3.3
3.2
3.1
3.0
2.9
2.8
2.7
–40
–20
0
20
40
60
TEMPERATURE (°C)
80
100
120
140
09771-100
2.6
Figure 6. Null Output over Temperature, 16 Parts in Sockets (VRATIO = 5 V)
Rev. 0 | Page 6 of 12
100
10
0.01
0.1
1
10
100
1k
10k
100k
AVERAGING TIME (Seconds)
Figure 9. Typical Root Allan Deviation at 25°C vs. Averaging Time
09771-012
ROOT ALLAN DEVIATION (°/Hour rms)
3.4
NULL (V)
2
PERCENT DRIFT (%)
Figure 5. Null Drift over Temperature (VRATIO = 5 V)
2.5
–60
0
09771-011
0.30
DRIFT (°/sec/°C)
0
09771-005
0.25
0.20
0.15
0.10
0.05
0
–0.05
–0.10
–0.15
–0.20
–0.25
0
–0.30
5
Data Sheet
ADXRS646
–0.35
0.70
–0.40
0.65
–0.45
0.60
–0.50
–0.55
0.45
–0.65
0.40
–0.70
0.35
20
40
60
80
100
120
140
0.30
–60
TEMPERATURE (°C)
–20
0
20
40
9
MAGNITUDE RESPONSE (dB)
40
30
20
10
–3
–2
–1
0
1
2
3
MISMATCH (%)
Figure 12. Self-Test Mismatch at 25°C (VRATIO = 5 V)
4
PHASE
650
630
590
570
610
120
140
0
–10
3
–20
0
–30
MAGNITUDE
–3
–40
–6
–50
–9
–60
–12
–70
–15
–80
–18
0.1
09771-008
0
100
COUT = 470pF
6
60
50
80
Figure 14. ST2 Output Change vs. Temperature, 16 Parts in Sockets
70
–4
550
60
TEMPERATURE (°C)
Figure 11. ST1 Output Change vs. Temperature, 16 Parts in Sockets
PERCENT OF POPULATION (%)
–40
1
FREQUENCY (kHz)
–90
10
PHASE RESPONSE (Degrees)
0
09771-101
–20
530
0.50
–0.60
–40
510
0.55
09771-103
ST2Δ (V)
0.75
09771-104
ST1Δ (V)
Figure 13. ST2 Output Change at 25°C (VRATIO = 5 V)
–0.30
–0.75
–60
490
ST2Δ (mV)
Figure 10. ST1 Output Change at 25°C (VRATIO = 5 V)
09771-007
ST1Δ (mV)
470
350
–350
0
450
5
09771-006
–370
–390
–410
–430
–450
–470
–490
–510
–530
–550
–570
–590
–610
0
–630
5
10
430
10
15
410
15
20
390
20
370
PERCENT OF POPULATION (%)
25
–650
PERCENT OF POPULATION (%)
25
Figure 15. ADXRS646 Frequency Response with a 2.2 kHz Output Filter
Rev. 0 | Page 7 of 12
Data Sheet
35
70
30
60
50
40
30
20
20
15
10
09771-009
3.30
3.25
3.20
3.15
3.10
3.05
3.00
2.95
2.90
0
2.85
0
2.80
5
2.75
10
VTEMP OUTPUT (V)
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0
50
100
TEMPERATURE (°C)
150
09771-102
0.5
–50
2.9
3.0
3.1
3.2
3.3
Figure 18. Current Consumption at 25°C (VRATIO = 5 V)
4.5
0
–100
2.8
CURRENT CONSUMPTION (mA)
Figure 16. VTEMP Output at 25°C (VRATIO = 5 V)
VTEMP (V)
25
Figure 17. VTEMP Output vs. Temperature
Rev. 0 | Page 8 of 12
3.4
09771-013
PERCENT OF POPULATION (%)
80
2.70
PERCENT OF POPULATION (%)
ADXRS646
Data Sheet
ADXRS646
THEORY OF OPERATION
The ADXRS646 operates on the principle of a resonator
gyroscope. Figure 19 shows a simplified version of one of
four polysilicon sensing structures. Each sensing structure
contains a dither frame that is electrostatically driven to
resonance. This produces the necessary velocity element to
produce a Coriolis force when experiencing angular rate. The
ADXRS646 is designed to sense a Z-axis (yaw) angular rate.
SETTING BANDWIDTH
When the sensing structure is exposed to angular rate, the
resulting Coriolis force couples into an outer sense frame,
which contains movable fingers that are placed between fixed
pickoff fingers. This forms a capacitive pickoff structure that
senses Coriolis motion. The resulting signal is fed to a series of
gain and demodulation stages that produce the electrical rate
signal output. The quad sensor design rejects linear and angular
acceleration, including external g-forces, shock, and vibration.
The rejection is achieved by mechanically coupling the four
sensing structures such that external g-forces appear as
common-mode signals that can be removed by the fully
differential architecture implemented in the ADXRS646.
and can be well controlled because ROUT is trimmed during
manufacturing to 180 kΩ ± 1%. Any external resistor applied
between the RATEOUT pin (1B, 2A) and SUMJ pin (1C, 2C)
results in
The combination of an external capacitor (COUT) and the
on-chip resistor (ROUT) creates a low-pass filter that limits the
bandwidth of the ADXRS646 rate response. The −3 dB
frequency set by ROUT and COUT is
fOUT = 1/(2 × π × ROUT × COUT)
ROUT = (180 kΩ × REXT)/(180 kΩ + REXT)
An additional external filter is often added (in either hardware
or software) to attenuate high frequency noise arising from
demodulation spikes at the 18 kHz resonant frequency of the
gyroscope. An RC output filter consisting of a 3.3 kΩ series
resistor and 22 nF shunt capacitor (2.2 kHz pole) is
recommended.
TEMPERATURE OUTPUT AND CALIBRATION
It is common practice to temperature-calibrate gyroscopes
to improve their overall accuracy. The ADXRS646 has a
temperature-dependent voltage output that provides input
to such a calibration method. The temperature sensor structure
is shown in Figure 20. The temperature output is characteristically nonlinear, and any load resistance connected to the
TEMP output results in decreasing the TEMP output and its
temperature coefficient. Therefore, buffering the output is
recommended.
X
Y
Z
VRATIO
RFIXED
Figure 19. Simplified Gyroscope Sensing Structure—One Corner
The electrostatic resonator requires 21 V for operation. Because
only 6 V are typically available in most applications, a charge
pump is included on chip. If an external 21 V supply is
available, the two capacitors on CP1 to CP4 can be omitted,
and this supply can be connected to CP5 (Pin 6D, Pin 7D).
CP5 should not be grounded when power is applied to the
ADXRS646. No damage occurs, but under certain conditions,
the charge pump may fail to start up after the ground is removed
without first removing power from the ADXRS646.
Rev. 0 | Page 9 of 12
VTEMP
RTEMP
09771-016
09771-015
The voltage at TEMP (3F, 3G) is nominally 2.9 V at 25°C, and
VRATIO = 6 V. The temperature coefficient is 10 mV/°C (typical)
at 25°C; the output response over the full temperature range is
shown in Figure 17. Although the TEMP output is highly
repeatable, it has only modest absolute accuracy.
Figure 20. Temperature Sensor Structure
ADXRS646
Data Sheet
SUPPLY RATIOMETRICITY
CONTINUOUS SELF-TEST
The null output voltage (RATEOUT), sensitivity, self-test
responses (ST1 and ST2), and temperature output (TEMP)
of the ADXRS646 are ratiometric to VRATIO. Therefore, using
the ADXRS646 with a supply-ratiometric ADC results in selfcancellation of errors resulting from minor supply variations.
There remains a small, usually negligible, error due to nonratiometric behavior. Note that, to guarantee full measurement
range, VRATIO should not be greater than AVCC.
The on-chip integration of the ADXRS646, as well as the
mature process with which it is manufactured, have provided
the gyroscope with field-proven reliability.
NULL ADJUSTMENT
The nominal 3.0 V null output voltage is true for a symmetrical
swing range at RATEOUT (1B, 2A). However, an asymmetric
output swing may be suitable in some applications. Null adjustment is possible by injecting a suitable current to SUMJ (1C, 2C).
Note that supply disturbances may cause some null instability.
Digital supply noise should be avoided, particularly in this case.
SELF-TEST FUNCTION
The ADXRS646 includes a self-test feature that actuates each
of the sensing structures and associated electronics in the same
manner as if the gyroscope were subjected to angular rate.
As an additional failure detection measure, self-test can be
performed at power-up or occasionally during operation. However,
some applications may require continuous self-test while sensing
rotation rate. Details outlining continuous self-test techniques
are available in the AN-768 Application Note, Using the
ADXRS150/ADXRS300 in Continuous Self-Test Mode. Although
the title of this application note refers to other Analog Devices
gyroscopes, the techniques apply equally to the ADXRS646.
MODIFYING THE MEASUREMENT RANGE
The ADXRS646 scale factor can be reduced to extend the
measurement range to as much as ±450°/sec by adding a
single 225 kΩ resistor between RATEOUT and SUMJ. If
an external resistor is added between RATEOUT and SUMJ,
COUT must be proportionally increased to maintain correct
bandwidth.
Self-test is activated by applying the standard logic high level ST1
pin (5F, 5G), the ST2 pin (4F, 4G), or both. Applying a logic high
to Pin ST1 causes the voltage at RATEOUT to change by −450 mV
(typical), and applying a logic high to Pin ST2 causes an opposite
change of +450 mV (typical). The voltage applied to the ST1 and
ST2 pins must never be greater than AVCC. The self-test response
follows the temperature dependence of the viscosity of the
package atmosphere, approximately 0.25%/°C.
Activating both ST1 and ST2 simultaneously is not damaging.
The output responses generated by ST1 and ST2 are closely
matched (±2%), but actuating both simultaneously may result
in a small apparent null bias shift proportional to the degree of
self-test mismatch.
Rev. 0 | Page 10 of 12
Data Sheet
ADXRS646
Gyroscopes are designed to respond only to rotation. However,
all gyroscopes respond to linear motion as well, to varying
degrees. While bias stability is often used as the primary figure
of merit for evaluating high performance gyroscopes, many
additional error sources are present in real-world applications.
Especially in applications that require motion sensors, vibration
and acceleration are present, and the resulting errors often
overwhelm bias drift.
Its differential, quad-sensor design makes the ADXRS646
inherently resistant to vibration, without the need for
compensation. The excellent vibration immunity of the
ADXRS646 is demonstrated in Figure 21 and Figure 22.
Figure 21 shows the ADXRS646 output response with and
without random 15 g rms vibration applied at 20 Hz to 2 kHz.
Performance is similar regardless of the direction of input
vibration.
1
To further improve immunity to vibration and acceleration,
some g-sensitivity compensation can be performed using an
accelerometer. This technique is most successful when the
response to vibration is constant regardless of vibration
frequency. Figure 22 demonstrates the ADXRS646 dc bias
response to a 5 g sinusoidal vibration over the 20 Hz to 5 kHz
range. This figure shows that there are no sensitive frequencies
present and that vibration rectification is vanishingly small.
Accordingly, g-sensitivity compensation using an accelerometer
is possible where needed, but the inherent device performance
is sufficient for many applications.
0.12
0.10
0.08
0.06
(°/sec)
IMMUNITY TO VIBRATION
0.04
0.02
0
0.1
–0.04
10
0.001
0.0001
0.00001
10
100
1k
FREQUENCY (Hz)
WITH VIBRATION
10k
09771-018
0.01
Figure 22. ADXRS646 Sine Vibration Output Response (5 g, 20 Hz to 5 kHz);
Gyroscope Bandwidth Set to 1600 Hz
NO VIBRATION
100
1k
FREQUENCY (Hz)
10k
09771-017
(°/sec)2/ Hz
–0.02
Figure 21. ADXRS646 Output Response With and Without Random Vibration
(15 g RMS, 20 Hz to 2 kHz); Gyroscope Bandwidth Set to 1600 Hz
Rev. 0 | Page 11 of 12
ADXRS646
Data Sheet
OUTLINE DIMENSIONS
A1 BALL
CORNER
7.05
6.85 SQ
6.70
*A1 CORNER
INDEX AREA
7
6
5
4
3
2
1
A
B
4.80
BSC SQ
0.80
BSC
C
D
E
F
G
TOP VIEW
BOTTOM VIEW
DETAIL A
3.80 MAX
0.60
0.55
0.50
SEATING
PLANE
3.20 MAX
2.50 MIN
COPLANARITY
0.15
BALL DIAMETER
*BALL A1 IDENTIFIER IS GOLD PLATED AND CONNECTED
TO THE D/A PAD INTERNALLY VIA HOLES.
10-26-2009-B
DETAIL A
0.60 MAX
0.25 MIN
Figure 23. 32-Lead Ceramic Ball Grid Array [CBGA]
(BG-32-3)
Dimensions shown in millimeters
ORDERING GUIDE
Model1
ADXRS646BBGZ
ADXRS646BBGZ-RL
EVAL-ADXRS646Z
1
Temperature Range
–40°C to +105°C
–40°C to +105°C
Package Description
32-Lead Ceramic Ball Grid Array [CBGA]
32-Lead Ceramic Ball Grid Array [CBGA]
Evaluation Board
Z = RoHS Compliant Part.
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D09771-0-9/11(0)
Rev. 0 | Page 12 of 12
Package Option
BG-32-3
BG-32-3