TLP361J Preliminary TOSHIBA Photocoupler GaAs IRED & PHOTO-TRIAC TLP361J Unit : mm Triac Driver Programmable Controllers AC-Output Module Solid State Relay TOSHIBA TLP361J consists of a zero voltage crossing turn-on photo-triac optically coupled to a gallium arsenide infrared emitting diode in a four lead plastic DIP package. • Peak Off-State Voltage • Trigger LED Current • On-State Current • Isolation Voltage : 600V(Min) : 10mA(Max) : 70mA(Max) : 5000Vrms(Min) JEDEC TOSHIBA 11-5B2 Weight: 0.26 g PIN CONFIGURATION (TOP VIEW) 4 1 2 ZC 3 1: ANODE 2: CATHODE 3: TERMINAL1 4: TERMINAL2 •Construction Mechanical Rating Creepage Distance Clearance Insulation Thickness 7.62 mm pich standard type 10.16 mm pich TLPXXXF type 7.0 mm (Min) 7.0 mm (Min) 0.4 mm (Min) 8.0 mm (Min) 8.0 mm (Min) 0.4 mm (Min) •Trigger LED Current Classi− fication* Trigger LED Current (mA) VT=6V, Ta=25°C Min. Max. Marking Of Classification (IFT7) ― 7 T7 Standard ― 10 T7, blank *Ex. (IFT7); TLP361J(IFT7) (Note) Application type name for certification test, please use standard product type name, i.e. TLP361J(IFT7): TLP361J 1 2003-10-27 TLP361J Maximum Ratings (Ta=25°C) CHARACTERISTIC SYMBOL RATING UNIT IF 50 mA ∆IF /°C −0.7 mA /°C Peak Forward Current (100µs pulse, 100pps) IFP 1 A Reverse Voltage VR 5 V Junction Temperature Tj 125 °C VDRM 600 V Forward Current LED Forward Current Derating (Ta≥53°C) Off-State Output Terminal Voltage Ta = 25°C DETECTOR On-State RMS Current IT(RMS) Ta = 70°C On-State Current Derating (Ta≥25°C) 70 mA 40 ∆IT/°C -0.67 mA /°C ITP 2 A ITSM 1.2 A Tj 100 °C Storage Temperature Range Tstg −55~125 °C Operating Temperature Range Topr −40~100 °C Lead Soldering Temperature (10s) Tsol 260 °C BVS 5000 Vrms Peak On-State Current (100µs pulse, 120pps) Peak Nonrepetitive Surge Current (Pw=10ms,DC=10%) Junction Temperature Isolation Voltage (AC,1min. , R.H.≤60%) (Note 1) (Note 1) : Pins1 and 2 shorted together and pin3 and pin4 shorted together. Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN. TYP. MAX. UNIT Supply Voltage VAC — — 240 Vac Forward Current IF 15 20 25 mA Peak On-State Current ITP — — 1 A Operating Temperature Topr −25 — 85 °C 2 2003-10-27 TLP361J Electrical Characteristics (Ta=25°C) D E T E C T O R LED CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Forward Voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse Current IR VR = 5 V — — 10 µA Capacitance CT V = 0, f = 1MHz — 30 — pF Peak Off-State Current IDRM VDRM = 600V — 10 1000 nA Peak On-State Voltage VTM ITM = 70mA — 1.7 2.8 V — 0.6 — mA 500 — V/µs 0.2 — V/µs MIN. TYP. MAX. UNIT Holding Current — IH Critical Rate of Rise of Off-State Voltage Critical Rate of Rise of Commutating Voltage dv/dt dv/dt(c) Vin = 240Vrms , Ta = 85°C (Note2) — Vin = 60Vrms , IT = 15mA (Note2) — Coupled Electrical Characteristics (Ta=25°C) CHARACTERISTIC SYMBOL TEST CONDITION Trigger LED Current IFT VT = 6V — — 10 mA Inhibit Voltage VIH IF = Rated IFT — — 20 V Leakage in Inhibited State IIH — 200 600 µA Turn-on Time tON — 30 100 µs MIN. TYP. MAX. UNIT — 0.8 — pF — Ω IF = Rated IFT VT = Rated VDRM VD = 6 → 4V , RL = 100Ω IF = Rated IFTΧ1.5 Isolation Characteristics (Ta = 25°C) CHARACTERISTIC SYMBOL Capacitance (Input to Output) CS Isolation Resistance RS TEST CONDITION VS=0 , f=1MHz VS=500V, R.H.≤60% BVS 1×10 14 10 5000 — — AC , 1second,in oil — 10000 — DC , 1minute,in oil — 10000 — AC , 1minute Isolation Voltage 12 Vrms Vdc (Note 2) : dv/dt TEST CIRCUIT + Vcc - Rin 120 Ω 1 4 2 3 +5V , Vcc Vin RL 0V 4 kΩ dv/dt(c) 3 dv/dt 2003-10-27 TLP361J RESTRICTIONS ON PRODUCT USE 030619EBC • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • The products described in this document are subject to the foreign exchange and foreign trade laws. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. • GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. 4 2003-10-27