FAIRCHILD NZT6727

NZT6727
NZT6727
PNP General Purpose Amplifier
4
• This device is designed for general purpose medium power amplifiers
and switches requiring collecor currents to 1.0A.
• Sourced from process 77.
3
2
1
SOT-223
1. Base 2. Collector 3. Emitter
Absolute Maximum Ratings* Ta=25°C unless otherwise noted
Symbol
VCEO
Collector-Emitter Voltage
Parameter
Value
-40
VCBO
Collector-Base Voltage
-50
V
VEBO
Emitter-Base Voltage
-5.0
V
IC
Collector Current
TJ, TSTG
Operating and Storage Junction Temperature Range
- Continuous
Units
V
-1.5
A
- 55 ~ 150
°C
* These ratings are limiting values above whitch the serviceability of any semiconductor device may be impaird.
NOTES:
1. These ratings are based on a maximum junction temperature of 150 degrees C.
2. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol
Off Characteristics
Parameter
Test Condition
Min.
Max.
Units
V(BR)CEO
Collector-Emitter Sustaining Voltage *
IC = -10mA, IB = 0
-40
V
V(BR)CBO
Collector-Base Breakdown Voltage
IC = -1.0mA, IE = 0
-50
V
-5.0
V(BR)EBO
Emitter-Base Breakdown Voltage
IE = -100µA, IC = 0
ICBO
Collector Cutoff Current
VCB = -50V, IE = 0
-0.1
µA
V
IEBO
Emitter Cut-off Current
VEB = -5.0V, IC = 0
-0.1
µA
On Characteristics
hFE
DC Current Gain
IC = -10mA, VCE = -1.0V
IC = -100mA, VCE = -1.0
IC = -1.0A, VCE = -1.0V
VCE(sat)
Collector-Emitter Saturation Voltage
IC = -1.0A, IB = -100mA
-0.5
V
VBE(on)
Base-Emitter On Voltage
IC = -1.0A, VCE = -1.0V
-1.2
V
55
60
50
250
Small Signal Characteristics
hfe
Small Signal current Gain
IC = -50mA, VCE = -10V, f = 20MHz
Ccb
Collector-Base Capacitance
VCB = -10V, IE = 0, f = 1.0MHz
2.5
25
30
pF
* Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 1.0%
Thermal Characteristics Ta=25°C unless otherwise noted
Symbol
PD
Parameter
Total Device Dissipation
Derate above 25°C
Max.
1.0
8.0
Units
W
mW/°C
RθJA
Thermal Resistance, Junction to Ambient
125
°C/W
* Device mounted on FR-4PCB 36mm × 18mm × 1.5mm; mounting pad for the collector lead min. 6cm2.
©2003 Fairchild Semiconductor Corporation
Rev. A, December 2003
NZT6727
Package Dimensions
3.00 ±0.10
4.60 ±0.25
6.50 ±0.20
(0.89)
(0.95)
(0.46)
1.60 ±0.20
2.30 TYP
7.00 ±0.30
(0.60)
0.70 ±0.10
(0.95)
+0.04
0.06 –0.02
(0.60)
3.50 ±0.20
1.75 ±0.20
MAX1.80
0.65 ±0.20
0.08MAX
SOT-223
°
10
+0.10
0.25 –0.05
0°~
Dimensions in Millimeters
©2003 Fairchild Semiconductor Corporation
Rev. A, December 2003
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
FACT Quiet Series™
ActiveArray™
FAST®
FASTr™
Bottomless™
FRFET™
CoolFET™
CROSSVOLT™ GlobalOptoisolator™
GTO™
DOME™
HiSeC™
EcoSPARK™
I2C™
E2CMOS™
EnSigna™
ImpliedDisconnect™
FACT™
ISOPLANAR™
Across the board. Around the world.™
The Power Franchise™
Programmable Active Droop™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerTrench®
QFET®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
SILENT SWITCHER®
SMART START™
SPM™
Stealth™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic®
TINYOPTO™
TruTranslation™
UHC™
UltraFET®
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY
LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR
CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
2. A critical component is any component of a life support
which, (a) are intended for surgical implant into the body,
device or system whose failure to perform can be
or (b) support or sustain life, or (c) whose failure to perform
reasonably expected to cause the failure of the life support
when properly used in accordance with instructions for use
device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to
result in significant injury to the user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
©2003 Fairchild Semiconductor Corporation
Rev. I5