SMD & DIP RF/PULSE TRANSFORMERS Wideband RF and General Purpose Applications FEATURES Designed for use in 50 Ohm wideband RF and fast rise time pulse applications. Standard 6 pins DIP or SMD package. Dielectric test voltage: 1500 Vrms MIN. Operating temperature: 0oC to 70oC. Low cost. PACKAGE 1 6 5 VITEC 14Z32XX 1 PACKAGE 2 6 0.300MAX 7.62MAX 2 3 0.200 5.08 5 SCHEMATIC A 0.300MAX 7.62MAX 4 0.230 5.84 0.015 0.38 0.120 3.05 .010 x .020 .25 x .51 @ Seating plane 0.300 0.100 7.60 2.54 Dimensions Inches/mm +/- 0.01" Unless noted 4 VITEC 26Z0XX 1 0.300MAX 7.62MAX 0.230 5.84 0.015 0.38 2 3 0.200 5.08 0.015 0.38 6 3 4 2 Windings SCHEMATIC B 1 6 Pad Layout 2 5 0.200 2.08 3 4 0.300MAX 7.62MAX 0.415MAX 10.54MAX 1 Leads are: 0.430 10.92 0.030 0.76 2 Windings with Center Tap SCHEMATIC C 0.290 7.37 1 6 5 0.100 0.230 2.54 5.84 Dimensions Inches/mm +/- 0.01" Unless noted 3 2 Windings with Secondary CT 4 ELECTRICAL CHARACTERISTICS @ 25oC Part Number Turns Ratio LP LL CC uH uH pF DIP SMD +/- 5% MIN MAX MAX 14Z3235 26Z035 1:1 40 0.15 14Z3236 26Z036 1CT:1CT 40 14Z3237 26Z037 1:2CT 14Z3238 26Z038 14Z3239 14Z3246 3 dB Bandwidth DCR ET Constant Package & Schematic Mhz Mhz VuS TYP TYP MIN DIP SMD 0.20 0.05 110 2.5 1A 2A 0.20 0.20 0.05 90 2.5 1B 2B 15 0.20 0.30 0.10 110 2.0 1C 2C 0.20 18 0.20 0.30 0.05 80 2.5 1C 2C 10 0.10 10 0.20 0.60 0.20 60 1.25 1C 2C 80 0.18 15 0.20 0.20 0.05 90 2.5 1B 2B PRI SEC 12 0.20 0.18 15 25 0.14 1:1.41CT 40 26Z039 1:4CT 26Z046 1CT:1CT Notes: - G-301 1 05/01 Vitec Electronics Corporation www.VitecCorp.com