ETC AND520HG

AND520HG
Ultra Bright LED Lamps: Type 3
Weight: 0.31g
Unit: mm
5.9±0.3
AND520HG
GaN High Brightness Green Light Emission
• 5 mm (T1-3/4) Package
• Peak wavelength (lp = 540nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power intensity – suitable for Outdoor Message Signboards
• High reliability
26.4 MIN.
1.0 MIN.
1.0 MAX.
1.0±0.2
8.6±0.3
5.0±0.2
0.5
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
IF
30
mA
Reverse Voltage
VR
5
V
PD
120
mW
Power Dissipation
2.54
Operating Temperature Range
-40 to 85
C
Storage Temperature Range
TSig
-40 to 100
C
0.5
Cathode Index
TOpr
1
2
1. Anode
2. Cathode
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20 mA
–
3.5
4.0
V
50
Reverse Current
IR
VR = 5V
–
–
Luminous Intensity
IV
IF = 20 mA
2.500
5,000
Peak Emission Wavelength
lP
IF = 20 mA
–
525
µA
mcd
–
nm
Spectral Line Half Width
∆l
IF = 20 mA
–
35
–
nm
Dominant Wavelength
ld
IF = 20 mA
–
530
–
nm
Full Viewing Angle
q
IV = 1/2 Peak
–
20
–
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260 C max.
Soldering time: 5 sec. max.
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is
recommended to use wrist band or antistatic gloves when handling these LEDs.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com
4/4/05
AND520HG
GaN High Brightness Green Light Emission
Ultra Bright LED Lamps: Type 3
IF – VF
IV – VF
Ta = 25°C
Ta = 25°C
30
Luminous Intensity IV (mcd)
Forward Current IF (mA)
50
10
5
3
10000
5000
3000
1000
500
1
2.75
3..0
3.25
3.5
3.75
4.0
200
4.25
1
3
Forward Voltage VF (V)
10
30 50
100
300
Relative Luminous Intensity – Wavelength
IV – TC
3
1.0
Relative Luminous Intensity
Relative Luminous Intensity
5
Forward Current IF (mA)
1
0.5
0.3
0.1
-20
0
20
40
60
IF = 20 mA
Ta = 25°C
0.8
0.6
0.4
0.2
0
80
500
525
550
575
600
Wavelength λ (nm)
Case Temperature TC (°C)
Radiation Pattern
IF – Ta
20°
10°
0°
10°
Ta = 25°C
20°
30°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
80°
Allowable Forward Current IF (mA)
40
30
20
10
90°
90°
0
0.2
0.4
0.6
0.8
0
0
20
40
60
80
Ambient Temperature Ta (°C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • email@purdyelectronics.com • www.purdyelectronics.com
100
4/4/05