C1048 REV C Product Description DDS - EP13 - Designed for use with Level One LXT400 and LXT441 Transceiver EIA date code and lot code A Terminal #1 indicator Component must insert fully to surface A 1 [12.70 MAX] .500 MAX COEV C1048 10 9 8 7 6 2 3 4 [13.97 MAX] .550 MAX 5 [13.97 MAX] .550 MAX [2.54 - 3.30] .100 - .130 φ .047 (10x) PRI (LINE SIDE) 2.54 .100 10.16 .400 .020 SQR (10x) 10 1 7 4 9 2 6 SEC (IC SIDE) 5 SCHEMATIC Information subject to change without notice. 2/98 Tolerances: Decimals .xx ± .01 Angles ± 0° 30' .xxx ±.005 Primary units are in inches. Millimeters are in brackets. Electrical Specifications Test Description Primary Inductance: Leakage Inductance: Interwinding Capacitance: Reflects 135 ohms at PRI with SEC loaded with: "PRI" D.C. Resistance (@ 20° C): "SEC" D.C. Resistance (@ 20° C): Turns Ratio: Dielectric Withstand: Direct Current in Primary: Return Loss: Return Loss: Insertion Loss (@ 20° C): Frequency Response: Longitudinal Balance: Longitudinal Balance: Agency Approvals: Limit 200 32.50 350 120 10.25 5.00 1CT : 1 1250 0 15 32 1.00 ± 1.00 60 40 Tol min ± 10.5 max --± 10% ± 10% ± 1% --max typ typ max max min min Units mH µH pF Ω Ω Ω --VRMS mA dB dB dB dB dB dB Notes 1 kHz, 1.0 VAC, Ls, 10-6 tie 7+9 10 kHz, 500 mVAC, Ls, 10-6 tie 7+9, 1+5 & 4+2 10 kHz, 500 mVAC, Cs, 10-1 tie 7+9 & 4+2 10-6 (tie 7+9) 1-5 (tie 4+2) PRI : SEC PRI to SEC, 1 second test 100 Hz - 100 kHz @ 1 kHz @ 10 kHz 100 Hz - 112 kHz 200 Hz - 1 kHz 1 kHz - 112 kHz The information contained in this drawing is the sole property of CoEv, Inc. Any reproduction in part or whole without the written permission of CoEv, Inc. is prohibited. TEL 888-978-2638 - FAX 605-886-8995 - www.coev.net