GaAs IC SPDT Switch Non-Reflective DC–6 GHz AS006M2-93 Features -93 ■ Low DC Power Consumption 0.160 0.140 ■ High Isolation, Non-Reflective ■ Broadband DC–6 GHz 0.100 ■ Excellent Intermodulation Products 0.060 ■ Small Low Cost “Chip on Board” Package 0.020 0.000 Description The AS006M2-93 is an IC FET SPDT switch in a low cost “chip on board” package. It features non-reflective matching at each output, broadband performance, with very low DC power consumption. This switch can be used in many analog and digital wireless communication systems. 0.140 0.000 0.056 Top View Electrical Specifications at 25°C Parameter1 Insertion Frequency4 Loss2 DC–1.0 DC–2.0 DC–4.0 DC–6.0 GHz GHz GHz GHz Isolation DC–1.0 DC–2.0 DC–4.0 DC–6.0 GHz GHz GHz GHz VSWR (I/O) DC–1.0 DC–2.0 DC–4.0 DC–6.0 GHz GHz GHz GHz Min. 48 42 36 26 Typ. Max. Unit 0.7 1.0 1.4 1.8 0.8 1.2 1.6 2.0 dB dB dB dB 58 50 42 35 dB dB dB dB 1.3:1 1.4:1 1.6:1 1.8:1 1.4:1 1.6:1 1.8:1 2.0:1 Typ. Max. Operating Characteristics at 25°C Parameter Switching Characteristics Condition Frequency Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru3 Input Power for 1 dB Compression Intermodulation Intercept Point (IP3) For Two-tone Input Power 13 dBm Control Voltages VLow = 0 to -0.2 V @ 20 µA Max. VHigh = -5 V @ 50 µA to -8 V @ 200 µA Max. Min. Unit 3 6 15 ns ns mV 0.50–6 GHz 0.05 GHz 24 16 dBm dBm 0.50–6 GHz 46 dBm 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/°C. 3. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth. 4. DC = 300 kHz. Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 2/00A 1 GaAs IC SPDT Switch Non-Reflective DC–6 GHz AS006M2-93 Typical Performance Data 70 60 2.0 Isolation (dB) Insertion Loss (dB) 2.5 1.5 1.0 50 40 30 20 0.5 10 0.0 0 1 2 3 4 5 0 6 0 1 2 3 4 5 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency Isolation vs. Frequency 6 Absolute Maximum Ratings Truth Table V1 V2 J1–J2 J1–J3 -5 0 Insertion Loss Isolation 0 -5 Isolation Insertion Loss Characteristic Value RF Input Power (RF In) 2 W Max. > 500 MHz 0/-8 V Control Control Voltage (VC) Pin Out V2 J1 J2 50 GND V1 -40°C to +90°C Storage Temperature (TST) -65°C to +150°C Thermal Resistance (ΘJC) 25°C/W GND GND 50 -0.2 V, -10 V Operating Temperature (TOP) J3 -93 0.160 0.150 0.140 0.130 0.112 0.110 0.090 0.070 0.050 0.048 0.030 0.020 Glass 0.140 0.121 0.102 0.038 0.020 0.000 0.010 0.000 Pt/Pd/Au Bottom View The “chip on board” package is a ceramic leadless chip carrier with a ceramic lid, which allows for automatic pick and place. The external terminals and backside ground plane are Pt/Pd/Au, which is highly leach resistant and very tolerant to variations in solder conditions. The glass fingers between contacts prevent the possibility of shorted terminals. The recommended solder attachment is a SN6337 (Pb/SN). 2 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 2/00A