26–33 GHz Surface Mount Single Balanced Up Converter Mixer AM028S2-A2 Patent Pending Features ■ Surface Mount Package ■ Low Conversion Loss, 7 dB ■ Low LO Power Requirement, 8 dBm ■ Wide IF Bandwidth, 0–6 GHz ■ No DC Bias Required ■ 100% RF Testing for Conversion Loss Description Pin Out N/C N/C N/C LO In RF Out GND Orientation Indicated by Missing Castellations IF In AM028S2-A2 YYWW GND The AM028S2-A2 is a broadband millimeterwave mixer in a rugged surface mount package that is compatible with high volume solder installation. The single balanced up converter mixer is designed for use in millimeterwave communication and sensor systems as a frequency conversion stage in the transmit chain when wide dynamic range and high linearity are required. The robust ceramic surface mount package provides excellent electrical performance and a high degree of environmental protection for long-term reliability. All mixers are screened at the operating frequencies prior to shipment for guaranteed performance. Mixer is targeted for high volume millimeterwave applications such as point-to-point and point-to-multipoint wireless communications systems. Electrical Specifications at 25°C Parameter Symbol RF and LO Frequency Range2 FRF, FLO Min. Typ. Max. 26–33 Unit GHz IF Frequency Range2 FIF 0–6 GHz LO Power Level2 PLO 8–18 dBm Conversion Loss1 LC 7 RF, LO and IF Return Loss2 RL 10 dB LO to RF Isolation2 ISOLO-RF 10 dB LO to IF Isolation2 ISOLO-IF 30 dB RF to IF Isolation2 ISORF-IF 30 dB P1 dB 0 dBm RF Input 1 dB Compression Point2 9 dB 1. Conversion loss is measured at FIF = 2 GHz, FLO = 26 GHz, PLO = 10 dBm on 100% of parts. 2. Not measured on a 100% basis. Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 6/01A 1 26–33 GHz Surface Mount Single Balanced Up Converter Mixer AM028S2-A2 Typical Performance Data FLO = FRF - 1 GHz PLO = 10 dBm 10 FLO = 26 GHz, FRF = FLO + FIF 18 Conversion Loss (dB) Conversion Loss (dB) 12 PLO = 8 dBm 8 PLO = 12 dBm 6 16 14 12 10 8 6 4 4 26 0 28 30 32 34 36 0 2 4 6 8 RF Frequency (GHz) IF Frequency (GHz) Conversion Loss IF Bandwidth FLO = FRF - 1 GHz, PLO = 10 dBm For RF Return Loss: FLO = 28.5 GHz, PLO = 10 dBm 0 10 Return Loss (dBm) LO/RF Isolation (dB) -10 -20 LO/IF RF/IF -30 LO -10 RF -20 -40 25 0 27 29 31 33 35 25 29 31 33 RF Frequency (GHz) Isolation RF and LO Return Loss FLO = 28.5 GHz, PLO = 10 dBm FLO = 26.5 GHz, FRF = 27.5 GHz, PLO = 10 dBm Conversion Loss (dB) 12 IF Return Loss (dBm) 27 Frequency (GHz) -10 35 10 P1 dB = 0 dBm 8 6 -20 0 2 4 6 IF Frequency (GHz) 8 10 4 -15 -5 0 5 IF Input Power (dBm) IF Return Loss 2 -10 Input Power Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 6/01A 10 26–33 GHz Surface Mount Single Balanced Up Converter Mixer Absolute Maximum Ratings FLO = FRF - 1 GHz, PLO = 10 dBm 12 AM028S2-A2 Conversion Loss (dB) Characteristic 10 -55˚C Value Operating Temperature (TC) -55°C to +85°C Storage Temperature (TST) -65°C to +125°C Total Input Power (RF + IF) +20 dBm 8 +25˚C +85˚C 6 +85˚C -55˚C 4 25 27 29 31 33 35 RF Frequency (GHz) Temperature -A2 2X 0.085 (2.16 mm) 0.251 (6.38 mm) 2X 0.044 (1.12 mm) 0.204 (5.18 mm) C L 2X 0.064 (1.63 mm) 8X 0.020 (0.51 mm) C L 2X 0.129 (3.28 mm) 0.056 (1.42 mm) 0.194 (4.93 mm) 2X 0.043 (1.09 mm) 0.016 (0.41 mm) 0.241 (6.12 mm) 0.040 (1.02 mm) Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 6/01A 3 26–33 GHz Surface Mount Single Balanced Up Converter Mixer AM028S2-A2 “Alpha Two” Surface Mount Package Handling and Mounting Millimeterwave components require careful mounting design to maintain optimal performance. The Alpha Two surface mount package (patent pending) provides a rugged and repeatable electrical connection using standard solder techniques. 64 Via Holes RF LO Handling The Alpha Two surface mount package is very rugged. However, due to ceramic’s brittle nature, one should exercise care when handling with metal tools. Do not apply heavy pressure to the lid. Vacuum tools may be used to pick and place this part. Only personnel trained in both ESD precautions and handling precautions should be allowed to handle these packages. Package Construction The Alpha Two surface mount package consists of a base and a lid. The package base is ceramic with filled vias and plated castellations. The package lid is unplated alumina. The lid seal is epoxy. Mounting Design IF Footprint Geometry for Alpha Two Surface Mount Package (for AM028S2-A2 mixer only) Mounting the Package The Alpha Two surface mount package is compatible with high-volume surface mount installation using solder. RF, LO and IF connections are accomplished with metallized edge castellations that hold solder fillets. Ground connections are accomplished by both metallized edge castellations and filled vias to the bottom of the package. Care should be taken to ensure that there are no voids or gaps in the solder so that good RF, LO, IF, and ground contact is maintained. The Alpha Two surface mount package is installed on top of a printed circuit board on a specially designed footprint. Mounting footprint geometry will be supplied by Alpha Industries in electronic formats or paper drawing. LO Printed Circuit Board Rogers 4003 0.008" (0.20 mm) Thick Solder Fillets RF IF Electrically & Thermally Conductive Ground Plane Alpha Two Surface Mount Package Installation 4 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [email protected] • www.alphaind.com Specifications subject to change without notice. 6/01A