PA050XS1 Version : 1.6 TECHNICAL MODEL SPECIFICATION NO. : PA050XS1 Customer’s Confirmation Customer Date By PVI’s Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 http://www.AZDISPLAYS.com Date : Jul. 15, 2004 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:1 PA050XS1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 - Cover (PA050XS1) Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals 1 2 3 3 3 4 5 7 8 8 18 18 22 23 23 24 25 26 Pixel Arrangement and input connector pin NO. Absolute Maximum Ratings Electrical Characteristics Power On Sequence Optical Characteristics Handling Cautions Reliability Test Indication of Lot Number Label Block Diagram Packing Revision History The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:2 PA050XS1 1. Application This technical specification applies to 5” color TFT-LCD module , PA050XS1. The applications of the panel are car TV, portable DVD, GPS, multimedia applications and others AV system.. 2. Features . Compatible with NTSC & PAL system . Pixel in stripe configuration . Slim and compact . Image Reversion : Up/Down and Left/Right 3. Mechanical Specifications Parameter Screen Size Display Format Active Area Dot Pitch Pixel Configuration Outline Dimension Surface Treatment Weight Specifications 5 (diagonal) 960×234 102.72(H)× 74.53(V) 0.107 (H)× 0.319 (V) Stripe 119.3(W)× 91.4(H)× 7.5(D)(typ.) Anti - Glare 124±5 Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:3 PA050XS1 4. Mechanical Drawing of TFT-LCD Module The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:4 PA050XS1 5. Input / Output Terminals TFT-LCD Module Connector FPC Down Connect , 30Pins , Pitch : 0.5 mm Pin No Symbol I/O Description Remark 1 DIO1 I/O Vertical start pulse Note 5 – 5 2 CPV I Shift clock for gate driver 3 VGL I Power for gate driver (AC voltage) 4 NC - No connection 5 VEE I Negative power for gate driver (DC voltage) 6 NC - No connection 7 XOE I Output enable for gate driver 8 VSS - Ground for digital circuit 9 VCC I Supply voltage for logic control circuit for gate driver 10 NC - No connection 11 VGH I Positive power for gate driver 12 NC - No connection 13 U/D I Up/Down control for gate driver Note 5 – 5 14 DIO2 I/O Vertical start pulse Note 5 – 5 15 VCOM I Common electrode voltage Note 5 – 1 16 STH1 I/O Start pulse for source driver Note 5 – 5 17 VDD1 I Supply power for digital circuit Note 5 – 3 18 VSS1 - Ground for digital circuit 19 VDD2 I Supply power for analog circuit 20 VSS2 - Ground for analog circuit 21 R/L I Left/Right control for source driver Note 5 – 5 22 VR I Video input R Note 5 – 1 23 VG I Video input G Note 5 – 1 24 VB I Video input B Note 5 – 1 25 CPH1 I Sampling and shift clock for source driver 26 CPH2 I Sampling and shift clock for source driver 27 CPH3 I Sampling and shift clock for source driver 28 29 30 STH2 OEH NC I/O I - Start pulse for source driver Output enable for source driver No connection Note 5 - 1 Note 5 - 2 Note 5 - 3 Note 5 - 4 Note 5 – 3 Note 5 – 5 Note 5 – 1 : VCOM = 6VPP. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:5 PA050XS1 Phase of the video signal input and VCOM The relation between these values could refer to 8-1 Operating condition. 100% white Composite Video Signal pedestal R,G,B Video Signal Vi DC (VR ,VG ,VB) VCOM VCOM DC VGL VGL DC Vi AC VCOM AC VGL AC 1H 1H Fig.1 Liquid crystal transmission of the video signal input, VCOM and timing VCOM Video Signal Input Maximum H Level L Level Black White Video Signal Input Minimum White Black White : maximum transmission / Black : minimum transmission Note 5 – 2 : VEE = -15V (Typ.). Note 5 – 3 : VDD1, VCC = +3.3V, VDD2 = +5V (Typ.) Note 5 – 4 : VGH = +17V (Typ.). Note 5 – 5 : STH1, STH2 and R/L mode R/L STH1 High(VDD) Input Low(0 Volt.) Output STH2 Output Input Remark Left to Right Right to Left The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:6 PA050XS1 STV1, STV2, and U/D mode U/D DIO1 High(VDD) Input Low(0 Volt.) Output DIO2 Output Input U/D(PIN 13)=High R/L(PIN 21)=High Remark Down to Up Up to Down U/D(PIN 13)=Low R/L(PIN 21)=Low 6. Pixel Arrangement and input connector pin NO. Line 1 Line 960 B G R B G R B G R B G R Row 1 B G R B G R B G R B G R Row 2 B G R B G R B G R B G R Row 3 B G R B G R B G R B G R Row 4 B G R B G R B G R B G R Row 233 B G R B G R B G R B G R Row 234 Gate driver Source driver Input FPC Pin 1 Pin 30 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:7 PA050XS1 7. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. GND = 0 V， Ta = 25 ℃ Parameter Symbol MIN. MAX. Unit VDD2 -0.3 +5.8 V VDD1 -0.3 +7.0 V VCC -0.3 +6.0 V VGH-VEE -0.3 +40.0 V H Level VGH -0.3 +25.0 V L Level VEE -16 +0.3 V -0.2 VDD1+0.2 V Storage Temperature -30 +80 ℃ Operation Temperature -20 +70 ℃ Supply Voltage For Source Driver Supply Voltage For Gate Driver Analog Signal Input Level VR,VG,VB Remark Note 7-1 Note 7-2 Notes 7-1 : Analog Input Voltage means VR,VG,VB. Notes 7-2 : Operating Temperature define that contrast, response time, other display optical character are Ta=+25. 8. Electrical Characteristics 8-1) Operating Condition Parameter Supply Driver Voltage For Source Analog Logic H level L level Supply Voltage For Gate Driver Analog Signal input Level Digital input voltage Digital output voltage Logic Amplitu H level L level H level L level Symbol MIN. VDD2 VDD1 VGH +4.5 +3.0 +15 Typ. +5.0 +3.3 +17 MAX. +5.5 +3.6 +19 Unit V V V VGL DC -13 -12 -11 V VGL AC +6.0 VP-P VCC +3.0 +3.3 +3.6 +0.3 VCC-0.3 0.7 VDD1 VDD1 -0.3 - 0.3 VDD1 0.7 VDD1 VDD1 -0.3 - 0.3 VDD1 V V V V V V VIH VIL VOH VOL VCOM AC - +6.0 - VCOM DC 1.3 1.5 1.7 VCOM Remark DC Component of VGL AC Component of VGL AC Component VP-P of V COM DC Component V of VCOM Note 8-1 Note 8-1 : PVI strongly suggests that the VCOM DC level shall be adjustable , and the adjustable level range is 1.5V±1V , every module’s VCOM DC level shall be carefully adjusted to show a best image performance. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:8 PA050XS1 Note 8-2: Both NTSC and PAL system Video Signal input waveform is based on 8 steps gray scale. White White Black Black 4.0±0.2V White White 8-2) Current Consumption (GND=0V) Parameter Current for Driver Symbol IGH IGL ICC IDD1 IEE IDD2 Condition VGH=+17V VGL=-12V VCC=+3.3V VDD1=+3.3V VEE=-15V VDD2=5V Min. - Typ. 0.08 1.57 0.1 1.2 0.1 7.0 Max. 0.12 2.35 0.15 3.0 0.15 10.0 Unit mA mA mA mA mA mA Ta= 25 ℃ Remark VGL center voltage 8-3) Backlight driving & Power Consumption Pin No 1 2 Symbol VL1 VL2 Description Input terminal (Hi voltage side) Input terminal (Low voltage side) Remark Note 8-3 Note 8-3 : Low voltage side of backlight inverter connects with Ground of inverter circuits. Ta= 25 ℃ Parameter Symbol Min. Max. Unit 392 Typ. 436 Lamp voltage VL 480 Vrms Lamp current IL 3 40 6 43 8 80 mA Lamp frequency Kick-off voltage(25℃) Kick-off voltage(0℃) PL Vs Vs - - 890 1180 KHz Vrms Vrms Remark Note 8-4 Note 8-5 Note 8-6 Note 8-6 Note 8-4 : In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 8-5 : The waveform of lamp driving voltage should be as closed to a perfect SIN wave as possible. Note 8-6 : This value is not output voltage of inverter. The voltage of inverter must larger than the starting voltage. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:9 PA050XS1 Power Consumption Parameter Symbol Conditions LCD Panel Power Consumption Backlight Lamp Power Consumption Total Power Consumption Note 8-7：The power consumption for backlight is not included. Ta= 25 TYP. Unit 60.0 mW 2.62 W 2.68 W ℃ Remark Note 8-7 Note 8-8 Note 8-8：Backlight lamp power consumption is calculated by IL×VL. 8-4) Input / Output Connector 1. Backlight Connector JST BHR-02VS-1, Pin No. : 2 , Pitch : 3.5 mm 8-5) Timing Characteristics Of Input Signals Characteristics Rising time Falling time High and low level pulse width CPH pulse duty STH setup time STH hold time STH pulse width STH period OEH pulse width Sample and hold disable time OEV pulse width CKV pulse width Clean enable time Horizontal display timing range STV setup time STV hold time STV pulse width Horizontal lines per field Vertical display start Vertical display timing range VCOM rising time VCOM falling time VCOM delay time RGB delay time Symbol tr tf tCPH tCWH tSUH tHDH tSTH tH tOEH tDIS1 tOEV tCKV tDIS2 tDH tSUV tHDV tSTV tV tSV tDV trCOM tfCOM tDCOM tDRGB Min. 147 30 20 20 61.5 400 400 256 Typ. 156 50 1 63.5 1.6 4.4 12 32 6 960 262 3 234 - Max. 10 10 166 70 65.5 1 268 5 5 3 1 Unit ns ns ns % ns ns tCPH μs μs μs μs μs μs tCPH/3 ns ns tH tH tH tH μs μs μs μs Remark CPH1 CPH1 STH1,STH2 STH1,STH2 STH1,STH2 STH1,STH2 OEH XOE CPV DIO1,DIO2 DIO1,DIO2 DIO1,DIO2 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:10 PA050XS1 10% tr 90% 90% tf 10% 8 – 6 ) Signal Timing Waveforms CPH3 (L) CPH2 (L) CPH1 STH1(2) 50% tCWH 50% tCPH tSUH tSTH tHDH g n i m i t k c o l c g n i l p m a S 1 8 . g i F The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:11 Fig. 8-2 Horizontal display timing range CPH1 Output (STH2/STH1) Input (STH1/STH2) tDH PA050XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:12 VGL DC V GL Fig. 8-3 (a) Horizontal timing White VIAC Blank V(R,G,B) VIDC VC DC VCOM CPV XOE STH1(2) OEH (HSY) Black 1H VIA tH White Blank Black V GL AC VC AC PA050XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:13 V(R,G,B) V GL DC GL V VCOM CPV XOE STH1(2) OEH (HSY) Fig. 8-3 (b) Detail horizontal timing Note : The falling edge of OEV should be synchronized with the falling edge of OEH tDRGB trCOM tDIS2 tOEV 10% 90% 50% tOEH tDCOM tCKV tDIS1 1H V GL AC tSTH 90% 10% tfCOM PA050XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:14 Fig. 8-4 Vertical shift clock timing CPV DIO1(2) t S1V 1H t H2V tCKV PA050XS1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:15 PA050XS1 VCOM (Even field) VCOM (Odd field) DIO1 (VSY) (HSY) V(R,G,B) Display on panel first line Fig. 8-5 (a) Vertical timing (From Up to Down) tsv Vertical timing (From up to down) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:16 PA050XS1 VCOM (Even field) VCOM (Odd field) DIO2 (VSY) (HSY) V(R,G,B) Display on panel first line Fig. 8-5 (b) Vertical timing (From Down to Up) tsv Vertical timing (From down to up) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:17 PA050XS1 9. Power On Sequence VGH VDD,VCC VSS(0V) VEE OFF OFF ON T1 T3 Logic signal RGB-Video signal T2 T4 1) 10ms≦T1<T2 2) 0ms<T3≦T4≦10ms 10. Optical Characteristics 10-1) Specification: Parameter Viewing Angle Contrast Ratio Symbol Condition Horizontal θ21, θ22 Vertical θ11 CR≧10 θ12 CR At optimized Rise Response time Fall Transmission Ratio Uniformity Brightness White Chromaticity Lamp Life Time Tr Tf TYP. MAX. 50 --35 --15 ----350 Unit deg deg deg 15 30 8.5 80 400 0.300 0.350 30 50 ------0.330 0.380 ms ms % % cd/㎡ θ=0° θ=0° ----8.0 70 350 0.270 0.320 +25℃ --- 30,000 --- Hr Viewing angle θ=0° U x y MIN. 45 30 10 200 Ta = 25℃ Remarks Note 10-1 Note 10-1 Note 10-1 Note 10-2 Note 10-4 Note 10-5 Note 10-3 Note 10-3 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:18 PA050XS1 Note 10-1 : The definitions of viewing angles Luminance when Testing point is White Luminance when Testing point is Black (Testing configuration see 10-2 ) Contrast Ratio is measured in optimum common electrode voltage. Note 10-2 : CR ＝ Note 10-3 : Topcon BM-7(fast) luminance meter 2°field of view is used in the testing (after 20~30 minutes operation). Lamp Current 6mA Note 10-4 : The definition of response time : White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:19 PA050XS1 Note 10-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast(TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 25% 50% 75% 25% 50% 75% The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:20 PA050XS1 10-2) Testing configuration BM-7(fast) Caution: 1. Environmental illumination≦1 lux 2. Before test CR, Vcom voltage must be adjusted carefully to get the best 500mm CR. R,G,B signal input Pattern generator y LCD Backlight LCD Display Testing Point Pattern A y R, G, B Waveform of Pattern A at Testing Point 63.6μs Testing Point Pattern B RGB waveform Vcom 63.6μs Vw=1.3V +/- 0.2V y R, G, B Waveform of Pattern B at Testing Point 63.6μs 63.6μs RGB waveform Vcom Vb=5.0V +/- 0.2V The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:21 PA050XS1 11. Handling Cautions 11-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1. The noise from the backlight unit will increase. 2. The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 11-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 11-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 11-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:22 PA050XS1 12. Reliability Test No 1 2 3 4 5 6 Test Item High Temperature Storage Test Low Temperature Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Thermal Cycling Test (non-operating) 7 Vibration Test (non-operating) 8 Shock Test (non-operating) 9 Electrostatic Discharge Test (non-operating) Test Condition Ta = +80℃, 240 hrs Ta = -30℃, 240 hrs Ta = +70℃, 240 hrs Ta = -20℃, 240 hrs Ta = +60℃, 90%RH, 240 hrs -25℃ → +70℃, 200 Cycles 30 min 30 min Frequency：10 ~ 55 HZ Amplitude：1.5 mm Sweep time: 11 mins Test Period : 6 Cycles for each direction of X, Y, Z 100G, 6ms Direction : ±X, ±Y, ±Z Cycle : 3 times 200pF, 0Ω ±200V 1 time / each terminal Ta: ambient temperature [Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. 13. Indication of Lot Number Label 1. Indicated contents of the label Lot number OOO-OOOOOO PA050XS1XXS Module number Contents of lot number : 1st~3rd—The OEM product 5th—Production year : 1999⇒9, 2000⇒A, 2001⇒B…….. 6th—Production month : 1, 2, 3,….9, A, B, C 7th~8th—Production size : 5” ⇒50 9th~10th— Serial numbers : 01~99 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:23 PA050XS1 14. Block Diagram LCD Panel V Driver (Gate) H Driver (Source) 30 PIN Input Inverter Back-light The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:24 PA050XS1 15. Packing The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:25 PA050XS1 Revision History Rev. 0.1 1.0 Issued Date Jan. 20 , 2003 Mar. 19, 2003 1.1 Jul. 29 , 2003 1.2 1.3 1.4 Aug. 29 , 2003 Sep. 19, 2003 Nov. 24, 2003 1.5 1.6 Jun. 28, 2004 Jul. 15, 2004 Revised Contents NEW Page 3 : Update Mechanical Specifications(Weight) Page 8 : Modify Current Consumption Page 23 : Modify Reliability Test(HTHH Condition) Page 25 : Add Packing Page 8 : Modify Electrical Characteristics Page 9 : Modify Current Consumption Page 4 : Modify Mechanical Drawing of TFT-LCD Module Page 9: Modify Current Consumption & Power Consumption Page 7: Add U/D and DIO1/2 Definition Page 20: Modify Optical Characteristics (Contrast Ratio Min. from 110 to 200 & Typ. from 150 to 350) Page 10: Modify Backlight Connector Pitch from 4 to 3.5 mm Page 4: Update Mechanical Drawing of TFT-LCD Module (Add Ground Wire) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.PAGE:26