1560& Transient 9ROWDJH6XSSUHVVRUV Series MERITEK FEATURES UL E2230 For surface mounted applications in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Excellent clamping capability. SMC/DO-214AB Repetition Rate (duty cycle): 0.01%. Fast response time: typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1µA above 10V. High Temperature soldering: 260°C/10 seconds at terminals. MM ECHANICAL DATA Case: JEDEC DO-214AB. Molded plastic over glass passivated junction. Terminal: Solder plated, solderable per MIL-STD-750, Method 2026. Polarity: Color band denotes cathode except Bidirectional. Standard Packaging: 16mm tape (EIA STD RS-481). Weight: 0.007 ounce, 0.21 grams. DD EVICES FOR BIPOLAR APPLICATION For Bidirectional use CA suffix for type 1.5SMC6.8CA through type 1.5SMC550CA; Electrical characteristics apply in both directions. MM AXIMUM RATINGS AND CHARACTERISTICS R Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 s waveform. (Note 1, Note 2, Fig. 1) Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3) Steady State Power Dissipation at TL =75 &, Lead length .375” (9.5mm). (Note 2, Fig. 5) Peak Forward Surge Current,8.3ms Single Half Sine-Wave Superimposed on Rated Load. (JEDEC Method) (Note 3, Fig. 6) Operating junction and Storage Temperature Range. SYMBOL VALUE UNIT PPPM Minimum 1,500 Watts IPPM See Table Amps PM(AV) 6.5 Watts IFSM 200 Amps TJ , TSTG -65 to +150 & Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA = 25& per Fig. 2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum. All specifications DUHsubject to change without notice. 1 Rev 7 1560& Transient 9ROWDJH6XSSUHVVRUV Series MERITEK PACKAGE DIMENSIONS t Cathode Band s D1 D d T1 T L SMC/DO-214AB Millimeters Item Inches Min. Max. Min. Max. L 6.60 7.11 0.260 0.280 D 5.59 6.22 0.220 0.245 D1 2.90 3.20 0.114 0.126 T 7.75 8.13 0.305 0.320 T1 0.76 1.52 0.030 0.060 d - 0.203 - 0.008 s 2.06 2.62 0.079 0.103 t 0.152 0.305 0.006 0.012 SPECIFICATIONS Part Number UNI-POLAR BI-POLAR Maximum Device Reverse Breakdown Breakdown Peak Reverse Test Clamping Marking Stand-Off Voltage Voltage Pulse Leakage Current Voltage Current @VRWM @IT @IT Code Voltage @IPP UNI BI VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA) 1.5SMC6.8A 1.5SMC6.8CA 6V8A 6V8C 5.80 6.45 7.14 10 10.5 144.8 1000 1.5SMC7.5A 1.5SMC7.5CA 7V5A 7V5C 6.40 7.13 7.88 10 11.3 134.5 500 1.5SMC8.2A 1.5SMC8.2CA 8V2A 8V2C 7.02 7.79 8.61 10 12.1 125.6 200 1.5SMC9.1A 1.5SMC9.1CA 9V1A 9V1C 7.78 8.65 9.50 1 13.4 113.4 50 1.5SMC10A 1.5SMC10CA 10A 10C 8.55 9.50 10.50 1 14.5 104.8 10 1.5SMC11A 1.5SMC11CA 11A 11C 9.40 10.50 11.60 1 15.6 97.4 5 1.5SMC12A 1.5SMC12CA 12A 12C 10.20 11.40 12.60 1 16.7 91.0 5 1.5SMC13A 1.5SMC13CA 13A 13C 11.10 12.40 13.70 1 18.2 83.5 1 1.5SMC15A 1.5SMC15CA 15A 15C 12.80 14.30 15.80 1 21.2 71.7 1 1.5SMC16A 1.5SMC16CA 16A 16C 13.60 15.20 16.80 1 22.5 67.6 1 1.5SMC18A 1.5SMC18CA 18A 18C 15.30 17.10 18.90 1 25.2 60.3 1 1.5SMC20A 1.5SMC20CA 20A 20C 17.10 19.00 21.00 1 27.7 54.9 1 1.5SMC22A 1.5SMC22CA 22A 22C 18.80 20.90 23.10 1 30.6 49.7 1 1.5SMC24A 1.5SMC24CA 24A 24C 20.50 22.80 25.20 1 33.2 45.8 1 1.5SMC27A 1.5SMC27CA 27A 27C 23.10 25.70 28.40 1 37.5 40.5 1 2 Rev 7 1560& Transient 9ROWDJH6XSSUHVVRUV Part Number Series MERITEK Maximum Peak Reverse Device Reverse Breakdown Breakdown Test Clamping Voltage Pulse Leakage Marking Stand-Off Voltage Voltage Current @IT Current @VRWM @IT Code Voltage @IPP VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA) 30A 30C 25.60 28.50 31.50 1 41.4 36.7 1 1.5SMC33CA 33A 33C 28.20 31.40 34.70 1 45.7 33.3 1 1.5SMC36A 1.5SMC36CA 36A 36C 30.80 34.20 37.80 1 49.9 30.5 1 1.5SMC39A 1.5SMC39CA 39A 39C 33.30 37.10 41.00 1 53.9 28.2 1 1.5SMC43A 1.5SMC43CA 43A 43C 36.80 40.90 45.20 1 59.3 25.6 1 1.5SMC47A 1.5SMC47CA 47A 47C 40.20 44.70 49.40 1 64.8 23.5 1 1.5SMC51A 1.5SMC51CA 51A 51C 43.60 48.50 53.60 1 70.1 21.7 1 1.5SMC56A 1.5SMC56CA 56A 56C 47.80 53.20 58.80 1 77.0 19.7 1 1.5SMC62A 1.5SMC62CA 62A 62C 53.00 58.90 65.10 1 85.0 17.9 1 1.5SMC68A 1.5SMC68CA 68A 68C 58.10 64.60 71.40 1 92.0 16.5 1 1.5SMC75A 1.5SMC75CA 75A 75C 64.10 71.30 78.80 1 103.0 14.8 1 1.5SMC82A 1.5SMC82CA 82A 82C 70.10 77.90 86.10 1 113.0 13.5 1 1.5SMC91A 1.5SMC91CA 91A 91C 77.80 86.50 95.50 1 125.0 12.2 1 1.5SMC100A 1.5SM100A 1.5SMC100CA 68A 100C 85.50 95.00 105.00 1 137.0 11.1 1 1.5SMC110A 1.5SMC110CA 75A 110C 94.00 105.00 116.00 1 152.0 10.0 1 1.5SMC120A 1.5SMC120CA 120A 120C 102.00 114.00 126.00 1 165.0 9.2 1 1.5SMC130A 1.5SMC130CA 130A 130C 111.00 124.00 137.00 1 179.0 8.5 1 1.5SMC150A 1.5SMC150CA 150A 150C 128.00 143.00 158.00 1 207.0 7.3 1 1.5SMC160A 1.5SMC160CA 160A 160C 136.00 152.00 168.00 1 219.0 6.9 1 1.5SMC170A 1.5SMC170CA 170A 170C 145.00 162.00 179.00 1 234.0 6.5 1 1.5SMC180A 1.5SMC180CA 180A 180C 154.00 171.00 189.00 1 246.0 6.2 1 1.5SMC200A 1.5SMC200CA 200A 200C 171.00 190.00 210.00 1 274.0 5.5 1 1.5SMC220A 1.5SMC220CA 220A 220C 185.00 209.00 231.00 1 328.0 4.6 1 1.5SMC250A 1.5SMC250CA 250A 250C 214.00 237.00 263.00 1 344.0 4.4 1 1.5SMC300A 1.5SMC300CA 300A 300C 256.00 285.00 315.00 1 414.0 3.7 1 1.5SMC350A 1.5SMC350CA 350A 350C 300.00 332.00 368.00 1 482.0 3.2 1 1.5SMC400A 1.5SMC400CA 400A 400C 342.00 380.00 420.00 1 548.0 2.8 1 1.5SMC440A 1.5SMC440CA 440A 440C 376.00 418.00 462.00 1 602.0 2.5 1 1.5SMC480A 1.5SMC480CA 480A 480C 408.00 456.00 504.00 1 658.0 2.3 1 1.5SMC510A 1.5SMC510CA 510A 510C 434.00 485.00 535.00 1 698.0 2.1 1 1.5SMC530A 1.5SMC530CA 530A 530C 477.00 503.50 556.50 1 725.0 2.1 1 1.5SMC540A 1.5SMC540CA 540A 540C 486.00 513.00 567.00 1 740.0 2.0 1 1.5SMC550A 1.5SMC550CA 550A 550C 495.00 522.50 577.50 1 760.0 2.0 1 UNI-POLAR BI-POLAR 1.5SMC30A 1.5SMC30CA 1.5SMC33A UNI BI Note: For Bidirectional type having VRWM of 10 volts and less,the IR limit doubles. 3 Rev 7 1560& Transient 9ROWDJH6XSSUHVVRUV RATING AND CHARACTERISTIC CURVES Figure 2 - Pulse Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % PPPM-Peak Pulse Power (kW) 100 10 100 75 50 25 0 0.00001 0.0001 0 0.001 Figure 3 - Pulse Waveform 75 100 125 150 175 200 100000 tr=10µsec T J =25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of PPM I Peak Value IPPM 100 Half Value IPPM IPPM ( 50 2 ) 10/1000µsec. Waveform as defined by R.E.A 1.0 0 2.0 3.0 Uni-directional V=0V 1000 Uni-directional @VR 100 Bi-directional @VR 10 td 0 Bi-directional V=0V 10000 Cj (pF) IPPM - Peak Pulse Current, %RSMI 50 Figure 4 - Typical Junction Capacitance 150 Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 4.0 t-Time (ms) 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) Figure 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Figure 5 - Steady State Power Dissipation Derating Curve 200 IFSM - Peak Forward Surge Current (A) PM(AV), Steady Sate Power Dissipation (W) 25 TA - Ambient Temperature (ºC) td-Pulse Width (sec.) 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 MERITEK (TA: 25°C UNLESS OTHERWISE SPECIFIED) Figure 1 - Peak Pulse Power Rating Curve 1 0.000001 Series 0 25 50 75 100 125 150 180 160 140 120 100 80 60 40 20 0 175 1 TA - Ambient Temperature (ºC) 10 100 Number of Cycles at 60 Hz 4 Rev 7