Philips Semiconductors Product specification N-channel TrenchMOSTM transistor FEATURES PHK4NQ10T SYMBOL QUICK REFERENCE DATA • Low on-state resistance • Fast switching • Low profile surface mount package d VDS = 100 V ID = 4 A g RDS(ON) ≤ 70 mΩ (VGS = 10 V) s GENERAL DESCRIPTION PINNING N-channel enhancement mode field-effect transistor in a plastic envelope using ’trench’ technology. Applications:• Motor and relay drivers • d.c. to d.c. converters SOT96-1 (SO8) PIN 1-3 DESCRIPTION 8 7 6 5 1 2 3 4 source 4 gate 5-8 drain pin 1 index The PHK4NQ10T is supplied in the SOT96-1 (SO8) surface mounting package. LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS VDSS VDGR Drain-source voltage Drain-gate voltage Tj = 25 ˚C to 150˚C Tj = 25 ˚C to 150˚C; RGS = 20 kΩ VGS ID Gate-source voltage Drain current (tp ≤ 10 s) IDM Ptot Drain current (pulse peak value) Total power dissipation Tj, Tstg Operating junction and storage temperature Ta = 25 ˚C Ta = 70 ˚C Ta = 25 ˚C Ta = 25 ˚C, t ≤ 10 s Ta = 70 ˚C, t ≤ 10 s MIN. MAX. UNIT - 100 100 V V - 65 ± 20 4 3 16 2.5 1.6 150 V A A A W W ˚C THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-a Surface mounted, FR4 board, t ≤ 10 sec Rth j-a Thermal resistance junction to ambient Thermal resistance junction to ambient August 1999 Surface mounted, FR4 board 1 TYP. MAX. UNIT - 50 K/W 150 - K/W Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOSTM transistor PHK4NQ10T ELECTRICAL CHARACTERISTICS Tj= 25˚C unless otherwise specified SYMBOL PARAMETER V(BR)DSS VGS(TO) Drain-source breakdown voltage Gate threshold voltage CONDITIONS MIN. VGS = 0 V; ID = 10 µA; Tj = -55˚C VDS = VGS; ID = 1 mA Tj = 150˚C Tj = -55˚C RDS(ON) IGSS IDSS Drain-source on-state VGS = 10 V; ID = 4 A resistance Gate source leakage current VGS = ±20 V; VDS = 0 V Zero gate voltage drain VDS = 100 V; VGS = 0 V; current Tj = 150˚C Tj = 150˚C 100 89 2 1.1 - TYP. MAX. UNIT 3 65 10 0.05 5 4 6 70 168 100 10 100 V V V V V mΩ mΩ nA µA µA Qg(tot) Qgs Qgd Total gate charge Gate-source charge Gate-drain (Miller) charge ID = 4 A; VDD = 80 V; VGS = 10 V - 22 4 8 - nC nC nC td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 50 V; RD = 12 Ω; VGS = 10 V; RG = 5.6 Ω Resistive load - 6 13 26 12 - ns ns ns ns Ld Ls Internal drain inductance Internal source inductance Measured from drain lead to centre of die Measured from source lead to source bond pad - 1 3 - nH nH Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 880 137 84 - pF pF pF REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS IS Ta = 25 ˚C, tp ≤ 10 s VSD Continuous source current (body diode) Pulsed source current (body diode) Diode forward voltage trr Qrr Reverse recovery time Reverse recovery charge ISM August 1999 MIN. TYP. MAX. UNIT - - 2.3 A - - 15 A IF = 4 A; VGS = 0 V - 0.82 1.2 V IF = 4 A; -dIF/dt = 100 A/µs; VGS = 0 V; VR = 25 V - 60 120 - ns nC 2 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOSTM transistor PHK4NQ10T Normalised Power Derating, PD (%) 100 100 Transient thermal impedance, Zth j-a (K/W) D = 0.5 90 0.2 80 10 0.1 70 0.05 60 0.02 1 50 single pulse 40 30 P D D = tp/T tp 0.1 20 T 10 0.01 1E-06 0 0 25 50 75 100 Ambient temperature, Ta (C) 125 150 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 Pulse width, tp (s) Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Ta) Fig.4. Transient thermal impedance. Zth j-a = f(t); parameter D = tp/T Drain Current, ID (A) VGS = 10V 10 Normalised Current Derating, ID (%) 100 9 90 5.4 V 8V 6V 8 80 5.2 V 5V 7 70 60 6 50 5 40 4 30 3 20 4.8 V 4.6 V 4.4 V 2 10 1 0 0 25 50 75 100 Ambient temperature, Ta (C) 125 Tj = 25 C 0 150 0 Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Ta); VGS ≥ 10 V 100 1E-05 0.2 4.6 V 4.8 V 1.8 2 Tj = 25 C 5V 5.2 V 0.14 1 ms 0.12 0.1 10 ms D.C. 1.6 0.16 100 us 1 0.6 0.8 1 1.2 1.4 Drain-Source Voltage, VDS (V) Drain-Source On Resistance, RDS(on) (Ohms) 0.18 tp = 10 us 10 0.4 Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS) Peak Pulsed Drain Current, IDM (A) RDS(on) = VDS/ ID 0.2 5.4 V 0.08 100 ms 6V 0.06 0.1 0.04 VGS = 10V 8V 0.02 0.01 0 0.1 1 10 100 Drain-Source Voltage, VDS (V) 1000 0 Fig.3. Safe operating area ID & IDM = f(VDS); IDM single pulse; parameter tp August 1999 1 2 3 4 5 6 Drain Current, ID (A) 7 8 9 10 Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(ID) 3 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOSTM transistor PHK4NQ10T Drain current, ID (A) 4.5 10 VDS > ID X RDS(ON) 9 Threshold Voltage, VGS(TO) (V) 4 8 3.5 7 3 6 2.5 5 maximum typical minimum 2 4 1.5 150 C 3 Tj = 25 C 2 1 1 0.5 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 -60 -40 -20 Gate-source voltage, VGS (V) 20 40 60 80 100 120 140 160 180 Junction Temperature, Tj (C) Fig.7. Typical transfer characteristics. ID = f(VGS) 20 0 Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS Transconductance, gfs (S) 1.0E-01 Drain current, ID (A) VDS > ID X RDS(ON) 18 16 1.0E-02 Tj = 25 C 14 12 minimum 1.0E-03 150 C 10 typical 1.0E-04 8 maximum 6 1.0E-05 4 2 1.0E-06 0 0 1 2 3 4 5 6 Drain current, ID (A) 7 8 9 0 10 Fig.8. Typical transconductance, Tj = 25 ˚C. gfs = f(ID) 0.5 1 1.5 2 2.5 3 3.5 Gate-source voltage, VGS (V) 4 4.5 5 Fig.11. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS Normalised On-state Resistance 2.9 2.7 2.5 2.3 2.1 1.9 1.7 1.5 1.3 1.1 0.9 0.7 0.5 Capacitances, Ciss, Coss, Crss (pF) 10000 Ciss 1000 Coss 100 Crss 10 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 Junction temperature, Tj (C) 0.1 Fig.9. Normalised drain-source on-state resistance. RDS(ON)/RDS(ON)25 ˚C = f(Tj) August 1999 1 10 Drain-Source Voltage, VDS (V) 100 Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz 4 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOSTM transistor PHK4NQ10T Source-Drain Diode Current, IF (A) 10 Gate-source voltage, VGS (V) 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 VGS = 0 V 9 ID = 4A 8 Tj = 25 C VDD = 20 V 7 150 C 6 VDD = 80 V Tj = 25 C 5 4 3 2 1 0 0 5 10 15 20 25 Gate charge, QG (nC) 30 35 0 1 1.1 1.2 1.3 1.4 1.5 Source-Drain Voltage, VSDS (V) Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj Fig.13. Typical turn-on gate-charge characteristics. VGS = f(QG) August 1999 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 5 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOSTM transistor PHK4NQ10T MECHANICAL DATA SO8: plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 D E A X c y HE v M A Z 5 8 Q A2 A (A 3) A1 pin 1 index θ Lp 1 L 4 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) A max. A1 A2 mm inches UNIT A3 bp c D (1) E (2) 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 5.0 4.8 0.069 0.010 0.057 0.004 0.049 0.01 0.019 0.0100 0.014 0.0075 0.20 0.19 e HE 4.0 3.8 1.27 6.2 5.8 0.16 0.15 0.050 L Lp Q 1.05 1.0 0.4 0.7 0.6 0.244 0.039 0.028 0.041 0.228 0.016 0.024 v w y Z (1) 0.25 0.25 0.1 0.7 0.3 0.01 0.01 0.004 0.028 0.012 θ o 8 0o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT96-1 076E03S MS-012AA EIAJ EUROPEAN PROJECTION ISSUE DATE 95-02-04 97-05-22 Fig.15. SOT96 surface mounting package. Notes 1. This product is supplied in anti-static packaging. The gate-source input must be protected against static discharge during transport or handling. 2. Refer to Integrated Circuit Packages, Data Handbook IC26. 3. Epoxy meets UL94 V0 at 1/8". August 1999 6 Rev 1.000 Philips Semiconductors Product specification N-channel TrenchMOSTM transistor PHK4NQ10T DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. August 1999 7 Rev 1.000